• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.414-419
• /
• 2010

Hyphenated-HPLC techniques combine the separation power of HPLC with the structural and bioactivity information provided by NMR, ESI/MS, and an on-line antioxidant screening system. The major advantages over the traditional off-line techniques are rapidity and efficiency. In this study, we used hyphenated HPLC techniques including online HPLC-ABTS, LC-NMR, and LC-MS todirectly identify the major antioxidants of safflower (Carthamus tinctorius L.) seeds. The results demonstrated that the major antioxidant compounds from on-line HPLC-ABTS analysis were identified as 8'-hydroxyarcgenin-4'-O-$\beta$-D-glucoside, N-(p-coumaroyl) serotonin, and N-feruloylserotonin. Among them, N-feruloylserotonin accounted for almost 50% of the ABTS radical scavenging activity of the total extract. The results demonstrate that HPLC hyphenated techniques can be used to rapidly screen and structurally identify antioxidants from crude plant extracts.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.3
• /
• pp.115-124
• /
• 1997

We measured the variance of eddy diffusion and associated ‘diffusion coefficients’ in coastal regions of Korea by observing the separation distances among multiple drifters deployed simultaneously at the same initial position. The variance of eddy diffusion was found to be proportional to $t^m$, where t is the time and m is a non-integer scaling exponent between 1.5 and 3.5. The observed scaling exponent of eddy diffusion cannot be reproduced by diffusion models employing constant eddy diffusivity. In this study, we applied fractal theory in simulating exponential increase of variance of eddy diffusion. We employed the fGn(fractional Gaussian noise) as a ‘modified’ random walks corresponding to the oceanic eddy diffusion. The variance of eddy diffusion, which corresponds to the fBm(fractional Brown motion) of our diffusion model, is proportional to $t^{2H}$, where H is Hurst scaling exponent. The temporal increase of the variance. with scaling exponent between 1 and 2, was successfully reproduced by our fractal diffusion model. However, our model cannot reproduce scaling exponent greater than 2. The scaling exponents greater than 2 are associated with the velocity shear of the mean flow.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.694-702
• /
• 2002

Activated carbons have been used as adsorbents in various industrial application, such as solvent recovery, gas separation, deodorization, and catalysts. In this study, the effects of residual water on the activated carbon adsorbent surface on the adsorption capacity of $CCl_4$ were investigated. Adsorption behavior in a fixed bed was studied in terms of feed concentration, flow rate, breakthrough curve and adsorption capacity for $CCl_4$. Desorption characteristics of residual water on activated carbon were also studied. The water contents of the activated carbon were varied in the range of 0-20%(w/w) and all experiments were performed at 298.15 K. The adsorption equilibrium data $CCl_4$ on the activated carbon were well expressed by Langmuir isotherm. The adsorption capacity of $CCl_4$ decreased with increasing residual water content. Desorption of residual water in activated carbon decreased expotentially with $CCl_4$ adsorption. The obtained breakthrough curves using LDF(linear driving force) model represented our experimental data.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Solar Energy
• /
• v.13 no.1
• /
• pp.11-21
• /
• 1993

The purpose of this study was to investigate the enhancement of heat transfer without additional external power in the case of rectangular impingement air jet vertically on the flat heating surface. The technique used in the present study was placement of square rod bundles as a turbulence promoter in front of the heat transfer surface. The results obtained through this study were summerized as follws. High heat transfer enhancement was achieved by inserting rods in front of the heating flat plate. According to visulaization, it was examined because of flow acceleration and separation and disturbance of boundary layer. The smaller clerance between rod and heating plate was, the larger heat transfer effect became at each H/B. Arverage Nusselt number reached maximum at H/B=10 and the local augmentation rate of heat transfer became maximum at H/B=2. The maximum average heat transfer enhancement rate increase about 43% for the case of X/B=2 and C=1mm, compared to a flat plate without rods. The correlating equation of average Nusselt number and Reynolds number was obatined. As follws : ${\overline{Nu}}_0=1.249Re^{0.465}(C/A)^{-0.033}(H/B)^{0.013}$.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.201-207
• /
• 2012

In this study, we investigated permeation of single gas ($N_2$, $O_2$, $CF_4$, and $SF_6$) through flat sheet membrane composed of PDMS (poly-dimethylsiloxane) and PEBAX (polyether block amides). Gas permeation experiment was performed with various feed pressure. Permeability was estimated using permeation flux measured by continuous-flow technique. The permeability of gases except $SF_6$ in PDMS were decreased with the upstream pressure increased. $SF_6$ is much more permeable than $CF_4$, which is due to higher critical temperature of $SF_6$. The permeability decreased in the following order: $O_2$ > $N_2$ > $SF_6$ > $CF_4$. On the other hand, the permeability of gases in PEBAX followed the order: $O_2$ > $N_2$ > $CF_4$ > $SF_6$ which are opposite of the order of kinematic diameter (${\AA}$)($SF_6$ > $CF_4$ > $N_2$ > $O_2$). The $SF_6/CF_4$ pure gas selectivity in PDMS was 2.1 at 0.7 MPa.

• Journal of the Korean association of regional geographers
• /
• v.10 no.4
• /
• pp.757-774
• /
• 2004

This paper is to reclassify systematically the functions of urban river: that is, water supply, land management, transportation and energy source as social and economic function; formation of geomorphic surface, water-side landscape, community constitution and boundary and separation between regions as spatial function; and drainage of waste water, purification, habitation, and weather regulation as ecological function. On the basis of this reclassification, it can be argued that the socio-economic functions (eg. water supply) of the river among the functions of the river have been strongly mobilized in the process of modernization, while the spatial function and ecological function of urban river have been ignored. The Kumho river which flows through Daegu and the adjacent area has made a great contribution to the modem development process of the river basin area, but as a result of a selective development of a specific function of the river, that is the social and economic function, it now suffers from the lack of instream flow and is deprived of its original functions with the water pollution and degradation. Moreover the Daegu region seems no longer possible to develop on the dependence of the river. In order to overcome this kind of social and environmental crisis, this paper is to suggest both some principles and main evaluating indicators to restore the original and comprehensive functions of the river, and important measures to make the co-evolution of the city and the river possible.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.213-217
• /
• 2001

In order to develop a new separation technology, supercritical fluid extraction process was used to produce high purity pigments and fatty acids from seaweed (Undaria pinnatifida). Supercritical carbon dioxide was used as a solvent and ethanol as an entrainer. The sample was treated by a frozen drier and experiments were conducted with a semi-batch flow system at various operating conditions (pressure range, $10.3\~17.2$ MPa; temperature range, $30\~45^{\circ}C$: particle size, $500\~1,000{\mu}m$ extraction time, 60 min). Characteristics of the recovered pigment (chlorophyll a) and fatty acids were determined by UV-spectrophotometry and gas chromatography, respectively. The highest extraction efficiency for fatty acids and pigments was achieved at 12.4 MPa, $35^{\circ}C$, $500{\mu}m$of seaweed size.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.368-372
• /
• 1984

This paper deals with a rapid method for determination of ATP and its related compounds in fish and shellfish products using high performance liquid chromatography(HPLC). The HPLC used is a HPLC/ALC-224 equiped with UV-spectrophotometer (254 nm) as detector and integrator (Yanagimoto system-1000). The column used is a stainless steel tubing ($30.0\;cm{\times}3.9\;mm\;i.d.$) packed with ${\mu}-Bon-dapak\;C_{18}$. A mixture of $1\%$ triethylamine-phosphoric acid(pH6.5) was used as an eluent and the flow rate of the eluent was controlled at 2 ml/min. For the separation of ATP and its related compounds, a standard mixture of ATP, ADP, AMP, IMP, inosine and hypoxanthine was subjected to HPLC under the above mentioned conditions. Six peaks were obtained with retention times within 20 min, and elution order were hypoxanthine, IMP, inosine, AMP, ADP and ATP. But 5'-IMP and 5'-GMP fractions were not separated by this method. In generally, IMP content in boiled-dried fish and shellfish products purchased from the market was comparatively higher than that of other nucleotides. Especially, boiled-dried big eye herring marked higher value in IMP content than other boiled-dried ones. Hypoxanthine and inosine were major components of ATP-related compounds in dried products and seasoned-dried ones. And IMP content in seasoned-dried products was higher than that of dried ones. This fact is suggested that a part of IMP in seasoned-dried ones was derived from flavoring matter (MSG, 5'-IMP and 5'-GMP) which is added during the seasoning treatment.