• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1392-1399
• /
• 2001

The flow fields inside a molten Zn pot of continuous hot-chip galvanizing process were investigated experimentally. With varying several parameters including the strip speed Vs, flow rate Q of induction heater. scrapper location and baffle configuration, instantaneous velocity fields were measured using a PIV velocity field measurement technique. Inside the strip region, counter-clockwise rotating flow is dominant. The general flow pattern inside the strip region is nearly not influenced by the strip speed Vs, flow rate Q and the scrapper location. In the exit region, the flow separated from the moving strip due to the existence of a stabilizing roll ascends to the free surface, for the cases of no scrapper and scrapper detached form the roll. On the other hand, the ascending flow to the free surface is decreased, as the flow rate Q of induction heater increases. By installing a baffle around the uprising strip, the flow moving up to the stabilizing roll decreases. In addition, B-type baffle is better than A-type baffle in reducing speed of flow around the stabilizing rolls. However, the flow ascended to the free surface is largely influenced by changing the flow rate Q, and the scrapper location, irrespective of the baffle type.

• 한국정보과학회논문지:정보통신
• /
• 제36권6호
• /
• pp.492-504
• /
• 2009

IPTV나 Mobile IPTV와 같은 실시간 멀티미디어 스트리밍 시스템의 설계에 있어 중요한 요소 중 하나는 변화하는 네트워크 특성과 상태에 효율적으로 적응하여 멀티미디어 데이터를 전달하는 것이다. 네트워크 적응적 데이터 전송은 네트워크의 혼잡상황에서 네트워크의 안정성과 프로토콜간 공정성을 향상시킬 수 있지만 영상재생의 연속성과 같은 콘텐트 재생 특성을 고려하지 않아 사용자에게 양질의 QoE(Quality of Experience)를 제공하지 못하는 문제점을 가지고 있다. 본 논문에서는 콘텐트의 재생 특성을 고려하지 않아 발생하는 문제점을 해결하기 위해 인터넷 혼잡상황에서 멀티미디어 스트리밍 서비스의 QoE 향상을 위한 새로운 전송률 제어기법인 NCAR(Network and Client-Aware Rate control)을 제안하였다. 제안한 NCAR 기법은 네트워크 인지형 혼잡제어(Congestion Control)와 클라이언트 인지형 흐름제어(Flow Control)를 기반으로 동작하고 있다. 네트워크 인지형 혼잡제어는 멀티미디어 스트리밍의 공성정과 안정성을 향상시키고 높은 링크 활용도와 전송률의 변화를 감소시키며 클라이언트 인지형 흐름제어는 미디어 재생의 불연속성을 제거하고 안정된 버퍼할당과 낮은 재생지연시간의 좋은 특성을 제공한다. 시뮬레이션 결과를 통해 제안한 방법의 유효성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.773-777
• /
• 2005

This article is about using information technology to apply with water loss inspection system in District Metering Area (DMA). Inspector can check Flow rate and Minimum Night Flow; NMF via Smart Phone or PDA include sending SMS Alert in case the Pressure, Flow rate and NMF is over the range of controlling. This will be used as equipment to implement water loss in international proactive and can keep on water loss reduction more efficiency. The system consists of Data Logger which collects data of Flow rate from DMA Master Meter. PC is Wap Server which dial via modem in order to get data through FTP Protocal that will convert text file to Microsoft Access Database. Wappage will use xhtml language to show database on Wapbrowser and can show the result on Smart Phone or PDA by graph and table for system analysis.

• 제어로봇시스템학회논문지
• /
• 제8권5호
• /
• pp.407-412
• /
• 2002

A measurement device for gas concentration and flow rate using hot wire is developed for the utilization in industrial applications. The device has two cells of measuring and reference, and a bridge circuit is installed to detect electric current through the hot wire in the cells. An amplification of the signal and conversion to digital output are conducted for the on-line measurement with a personal computer. The flow rate of air and carbon dioxide gas is separately measured for the performance examination of the device. Also, the concentration of air-carbon dioxide and carbon dioxide-argon mixtures is determined for the same evaluation. The outcome of the performance test indicates that the accuracy and stability of the device is satisfactory for the purpose of industrial applications.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.448-453
• /
• 2005

Temperature Control Valve (TCV) is one of the useful temperature control devices, which is used to control constant temperature of working fluid in power and chemical plants and domestic water supply systems. TCV is composed of body, cylinder and piston, and the body shape has a symmetrical H-type. In general, it has several inlet and outlet holes, and its shape is like as tubular sleeve. The piston has three rings two rings of the end of piston have the function of controlling inlet flow rate with hot and cold working fluids, the center ring has the function of preventing hot and cold water from intermixing. Consequently, the shapes of piston and cylinder are the main design parameters in the performance of TCV. In this study, numerical analyses were carried out with two different piston and cylinder shapes to investigate the functions as a temperature control valve and the flow characteristics according to piston opening grade in TCV. Using a commercial code, FLUENT, velocity and pressure fields in TCV are obtained under steady, standard $k -{\epsilon}$ turbulence model and no-slip condition.

• Journal of Information Processing Systems
• /
• 제15권5호
• /
• pp.1131-1140
• /
• 2019

Characteristics of fruit tree canopies are important target information for adjusting the pesticide application rate in variable rate spraying in orchards. Therefore, the target detection of the canopy characteristics is very important. In this study, a canopy volume measurement method for peach trees was presented and a variable rate spraying system based on canopy volume measurement was developed using the ultrasonic sensing, one of the most effective target detection method. Ten ultrasonic sensors and two flow control units were mounted on the orchard air-assisted sprayer. The ultrasonic sensors were used to detect the canopy diameters and the flow controls were used to modify the flow rate of the nozzles in real time. Two treatments were established: a constant application rate of $300Lha^{-1}$ was set as the control treatment for the comparison with the variable rate application at a $0.095Lm^{-3}$ canopy. The tracer deposition at different parts of peach trees and the tracer losses to the ground (between rows and within rows) were analyzed in detail under constant rate and variable rate application. The results showed that there were no significant differences between two treatments in the liquid distribution and the capability to reach the inner parts of the crop canopies.

• 한국터널지하공간학회 논문집
• /
• 제24권4호
• /
• pp.327-339
• /
• 2022

본 연구에서는 지하철 승강장에서 열차화재가 발생하는 경우, 승강장 제연풍량 및 제연모드(급기 또는 배기)에 따른 정량적 위험도 평가를 통해 안전확보에 효과적인 제연풍량 및 모드를 제시함을 목적으로 한다. 이를 위해 중앙계단을 갖는 상대식 승강장을 모델로 하여 화재발생 시나리오를 작성하였으며, 시나리오별 화재해석을 수행하여 연기전파특성과 ASET을 비교·분석하고 대피해석을 수행하여 사망자수를 예측하였다. 또한, 시나리오별로 화재사고 발생률(F)/사망자수(N)선도(F/N선도)를 작성하여 제연풍량 및 제연모드에 따른 위험도를 비교·평가하였다. 소방시설 등의 성능위주 설계 방법 및 기준에서 정하는 유해요소(일산화탄소, 온도, 가시거리)에 대한 ASET 분석에서는 가시거리의 영향이 가장 크게 나타나고 있으며, 화재열차의 승강장 진입지연을 고려하지 않은 경우에 풍량을 4 × 833 m³/min할 때 ASET은 약 800초 정도로 분석되었다. 예상사망자수는 화재차량위치에 따라 큰 차이가 있으며, 계단부에 인접한 차량에서 화재가 발생하는 경우에 선두부 차량대비 3배 까지 증가하는 것으로 나타나고 있다. 또한 제연풍량이 증가하면 사망자수가 감소하며 배기 보다는 급기방식이 감소율이 증가한다. 급기풍량이 4 × 833 m³/min일 때 예상 사망자수는 제연을 수행하지 않는 경우 대비 13%수준으로 감소하는 것으로 나타났다. 위험도 평가결과, 제연을 수행하는 경우에는 현행 사회적 위험도 평가기준을 만족하는 것으로 나타나고 있으며, 예상사망자수는 제연을 수행하지 않는 경우, 10,000년에 29.9명에서 제연을 수행하는 경우에는 풍량이 4 × 833 m³/min일 때 4.36명으로 감소하는 것으로 분석되었다.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.801-808
• /
• 2021

In this paper, a numerical analysis was conducted on the effect of the flow control valve of a oscillation water column(OWC) type wave power generator turbine. The OWC wave power turbine operates with compressed air in the air chamber according to the change of wave height. When the wave height changes rapidly, a flow control valve is required due to overload of the turbine and reduced efficiency. Therefore, in this paper, a flow control valve with an opening angle of 60 degrees was installed in the front of the turbine, and the pressure drop, torque, and overall performance were calculated according to the change of turbine RPM and flow rate of turbine inlet. In conclusion, the flow control valve with an opening angle of 60 degrees affects when the turbine rotates at low rotation and the inlet flow rate is large. But it does not have a significant effect on overall turbine performance and it is necessary to find the optimal angle in the future works.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1039-1046
• /
• 2002

To investigate the characteristics of orifice as an expansion devices, the experimental apparatus was made and experiments are being peformed using R22 and R290. The main idea of this control method of refrigerant flow rate with coupled orifices is to control the ON/OFF state of T and Ball type orifice corresponding to the subdivided region of thermal load. When system requires minimum thermal load, both T and Ball type orifices are closed, but refrigerant can flow through small hole of T type orifice. In regular thermal load, when ball type orifice is closed, T type orifice is opened and mass flow rate increase more than OFF state of T type orifice, due to large diameter. In maximum thermal load, both T and Ball type orifices are open and the much refrigerant can flow. The flow characteristics on T type orifice and parallel-combined orifice are obtained in the subdivided region of thermal load.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2001

TCV(Temperature control valve by pressure compensation) controls temperature constantly, when it is sending steam or high temperature water to heating device of heat exchanger. For designing TCV, the ratio of piston and hole diameters is one of the important design parameters. Numerical analysis is carried out to elucidate the flow characteristics in the TCV with different port areas of cold and hot waters, using the k-$\epsilon$ turbulence model and Cartesian cut-cell method. Numerical results show that the exit flow rate is mainly affected by pressure distribution in the piston.