• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.114-123
• /
• 2000

The flow structure around a rotating axial-fan was experimentally investigated using a phase averaging velocity field measurement technique. The fan blades were divided into 4 different phases, for which 500 velocity fields were acquired for each phase angle with a 2-frame PTV system. Velocity field measurements were also carried out at two planes parallel to the axis of rotation, with offsets toward the radial direction of the fan. For accurate synchronization of the PTV system with the phase of the axial fan, two synchronization circuits were employed with a photo-detector attached to the rotating shaft. The phase averaged velocity fields show periodic variations with respect to the blade phase. The periodic formation of vortices at the blade tip is also observed in vorticity contour plots. Locations of local maximum turbulence intensities in the axial and radial directions are found to be located in an alternating pattern. These experimental results can be used to validate numerical calculations and to understand the flow characteristics of an axial fan.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.935-941
• /
• 2006

Many important properties in colloidal systems are usually determined by surface charge $({\zeta}-potential)$ of the contacted solid surface. In this study, ${\zeta}-potential$ of glass ${\mu}-channel$ was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass f-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The ${\zeta}-potential$ in the glass ${\mu}-channel$ was measured fur two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and f-potential in the glass surface was also studied. In the range of $0{\sim}6mM$, the surfactant SDS was added to NaCl solution in few different mole concentrations. As a result, the addition of SDS increases ${\zeta}-potential$ in the surface of the glass ${\mu}-channel$. The measured $\zeta-potential$ was found to vary from -260 to -70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The ${\zeta}-potential$ has a positive sign for the negative particles.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.197-202
• /
• 2014

촉매 변환기의 효율은 촉매 물질이 포함되어 있는 하니콤 브릭 입구의 유동장 분포와 밀접한 관계가 있다. 하니콤 브릭 표면의 유동장 분포가 균일하지 않으면 시스템의 전환 효율이 감소하고 균일한 유동장 분포를 갖는 촉매 변환기에 비해 크기가 커져 제작비용도 증가한다. 따라서 촉매 변환기의 내부유동 해석은 매우 중요하다. 본 연구에서는 변환기 내부 하니콤 브릭 사이부분과 2번째 하니콤 브릭 출구부분의 유동분포를 단축을 따라 37.8 l/s와 94.4 l/s 유동영역에서 측정하였다. 또한, 자동차 제작사에서 이루어진 전산해석 결과를 측정 결과와 비교하여 실험적으로 검증하였다. 하니콤 브릭 사이부분의 ${\upsilon}$-속도분포 측정은 다소 변화하는 유동패턴이 형성되는 것을 보여주지만 입구 반대쪽 벽 부근영역에서 음의 유동장이 형성되고 음의 속도는 감소하여 중심 부근에서는 정체현상을 보이고 계속 입구 쪽까지 지속되는 것을 보여준다. 대부분의 속도 값에서 전산해석 결과는 측정치에 비하여 크게 나타났다.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.119-126
• /
• 2003

The problem of tracking moving objects in a video stream is discussed in this pa-per. We discussed the popular technique of optical flow for moving object detection. Optical flow finds the velocity vectors at each pixel in the entire video scene. However, optical flow based methods require complex computations and are sensitive to noise. In this paper, we proposed a new method based on the Hough transform and on voting accumulation for improving the accuracy and reducing the computation time. Further, we applied the Boo-lean based edge detector for edge detection. Edge detection and segmentation are used to extract the moving objects in the image sequences and reduce the computation time of the CHT. The Boolean based edge detector provides accurate and very thin edges. The difference of the two edge maps with thin edges gives better localization of moving objects. The simulation results show that the proposed method improves the accuracy of finding the optical flow vectors and more accurately extracts moving objects' information. The process of edge detection and segmentation accurately find the location and areas of the real moving objects, and hence extracting moving information is very easy and accurate. The Combinatorial Hough Transform and voting accumulation based optical flow measures optical flow vectors accurately. The direction of moving objects is also accurately measured.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.793-803
• /
• 1997

This experimental study was mainly investigated on the swirl flow characteristics in the cylinder generated by a helical intake port. LDA system was used for the measurement of in-cylinder velocity fields. Tangential and axial velocity profiles, with varying valve lifts, valve eccentricity ratios and axial distance, were measured. When the intake valve was set in the cylinder center, we could find that in-cylinder swirl flow fields were composed of a forced vortex motion and a free vortex motion in the vicinity of the cylinder center and the cylinder wall respectively. In case of valve eccentricity ratio, N$_{y}$ = 0.45, the vortex flow which rotates to the opposite direction of a main rotating flow in the cylinder was found. And the reverse flow toward the cylinder head surface was also found in axial velocity profile and it showed the tendency of the linear decrease in the region of 0.leq.Y/B.leq.1.2.2.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.95-100
• /
• 2013

Localization is very important for the autonomous navigation of Unmanned Ground Vehicles; however, it is difficult that they have a precise Inertial Navigation System(INS) sensor, especially Small Unmanned Ground Vehicle(SUGV). Moreover, there are some condition such as denial of global position system(GPS), GPS/INS integrated system is not robust. This paper proposes the estimation algorithm with optical flow sensor and INS. Being compared with previous researches, the proposed algorithm is suitable for skid steering vehicles. We revised the measurement model of previous research for the accuracy of side direction position. Experimental results were performed to verify the algorithm, and the result showed an excellent performance.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.206-214
• /
• 2003

Mean flow and turbulence properties of developing turbulent flows in a 90 degree square bend with spanwise rotation were measured by a hot-wire anemometer. A slanted wire is rotated into 6 orientations and the voltage outputs from them are combined to obtain the mean velocity and Reynolds stress components. The combinative effects of the centrifugal and Coriolis forces due to the curvature and the rotation of bend on the mean motion and turbulence structures are investigated experimentally. Results show that the two body forces can either enhance or counteract each other depending on the flow direction in the bend.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.445-450
• /
• 2011

금속분말을 연소시키기 위한 스월 연소기 설계의 기초단계로써 단일 접선 공급유로를 갖는 스월 혼합챔버를 제작하고 Paticle Image Velocimetry(PIV)를 사용하여 스월 혼합챔버의 내부 유동장 측정실험을 수행하였다. 상온의 공기를 작동유체로 사용하였으며 접선 공급유량이 증가하는 경우의 스월 혼합 챔버 내 축방향 및 접선방향 성분 속도를 획득하였다. 측정된 유동장을 바탕으로 스월유동과 역압력 구배로 인해 발생하는 외부 유입유동간의 혼합특성을 평가 하였다.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.607-624
• /
• 2018

Purpose: The purpose of this study is to present the success of cultural tourism service as visitor loyalty to service and to present the cultural attribute evaluation attribute (HISTOQUAL), experiential flow and tourism satisfaction as determinants effecting loyalty through literature review. Based on this, this study aims to suggest academic and practical implications for revitalizing cultural tourism services and enhancing competitiveness. Methods: This study collects data from visitors to cultural heritage tourist sites and analyzes them empirically. This study conducted a small preliminary sample survey to improve the reliability and validity of the measurement tool, and revised and supplemented the measurement tool on the basis of it. The data collected in this study were analyzed using SPSS 22.0 and the hypothesis was verified through the analysis. Results: The results of this study are as follows; First, the service quality of cultural heritage tourism has a positive effect on the experience flow. Second, the service quality of cultural heritage tourism partially effects tourism satisfaction. Third, it was shown that the experience flow of tourists have a positive effect on tourism satisfaction. Fourth, the experience flow of tourists and tourism satisfaction have a positive effect on loyalty to tourist destination. Conclusion: According to this study, it is the meaning of this study that the cultural tourism service is understood as a attractive factor and based on this, the strategic direction for the activation of cultural tourism service is suggested.

• 한국항행학회논문지
• /
• 제22권6호
• /
• pp.551-556
• /
• 2018

과거에 비해 최근에는 항공기 비행 및 기상정보측정을 위하여 드론을 많이 활용하고 있다. 관련 응용분야로는 저고도 대기자료 측정, 대기미세먼지측정, 대기 오염측정 등이 있다. 그러나 대기자료 측정센서의 장착위치는 드론비행체의 구조적 특징 때문에 프로펠러 유동의 영향, 전자파 영향, 드론의 무게중심의 변화를 고려하여 장착하여야 한다. 이중에서 프로펠러에 의한 기체 상부의 공기유동은 센서의 풍속 및 풍향에 영향을 미치므로 최적 위치를 분석하여 선정해야 한다. 본 연구는 대기자료 측정센서의 적정 높이 선정에 대한 연구로, 유동 해석을 통하여 유동특성을 파악하고 실험 데이터를 비교 분석하여 적정 센서 장착 높이를 제시한다.