• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.918-925
• /
• 2004

SCM은 제품을 생산하는 기업이 부품의 구매, 제조, 판매까지의 모든 일정을 수립하고 고객의 수요계획 및 물류현황을 체계적으로 정리, 제품의 흐름(부가가치 물자흐름)을 원활하고 효율적으로 수행할 수 있게 하는 것을 말한다. 본 논문에서는 SCM의 단순한 내부적 통합을 포함하여 공급망 전체의 정보흐름(소요량 정보흐름)을 유도할 수 있는 정부와 기업간 외부적 통합의 흐름을 분석하고 이에 따른 문제점과 개선방안을 제시하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.519-523
• /
• 2007

Gas(or methane) hydrates are solid solutions when water molecules are linked through hydrogen bonding and create host lattice cavities that can enclose a large variety of guest gas molecules. The natural gas hydrate crystal may exist at low temperature above the normal freezing point of water and high pressure greater than about 30 bars. A lot of quantities of natural gas hydrates exists in the earth and many production schemes are being studied. In the present investigation, depressurization method was considered to predict the production of gas and the simulation of the two phase flow - gas and water - in porous media is being carried out. The simulation show about the fluid flow in porous media have a variety of applications in industry. Results provide the appearance of gas and water production, the pressure profile, the saturation of gas/ water/ hydrates profiles and the location of the pressure front.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.175-178
• /
• 2003

In recent years, several researchers have presented the extensive research reports on network optimization problems. In our real life applications, many important network problems are typically formulated as a Maximum flow model (MXF) or a Minimum Cost flow model (MCF). In this paper, we propose a Genetic Algorithm (GA) approach used a priority-based chromosome for solving the bicriteria network optimization problem including MXF and MCF models(MXF/MCF).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.13-22
• /
• 1996

The quality requirements for metal forming products have become more strict. Machined parts, which could be produced only by cutting, can now be formed plastically. In order to reach the mechanical strength and geometrical accuracy, reasonable production technologies should be developed. In this presentation, some basic flow-press-technologies in the metal forming are introduced. Some real sample parts for a passenger can are shown and their forming plans are explained. Also problems and solutions for the production of bevel gears are discussed.

• Journal of Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.117-118
• /
• 2000

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.97-103
• /
• 1991

This paper deals with a scheduling problem with the objective of maximizing the throughput rate in flexible manufacturing system with shop type. Manufacturing system is consisted of multi-stage in series. All kinds of parts are processed in same in processing time. No buffer space is allowed between stages, and no part waiting is allowed in each stage. Part flow control method for determining the optimal production sequence of all parts and the production starting time of each part is proposed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.137-142
• /
• 2002

The fluid mechanics and operating conditions of gas-lubricated proceeding bearings in micro rotating machinery such as micro polarization modulator and micro gas turbine are different from their larger size ones. Due to non-continuum effects, there is a slip of gas at the walls. Thus in this paper, the slip flow effect is considered to estimate the pressure distribution and load-carrying capacity of micro gas-lubricated proceeding bearings as the local Knudsen number at the minimum film thickness is greater than 0.01. Based on the compressible Reynolds equation with slip flow, the static characteristics of micro gas-lubricated proceeding bearings are obtained. Numerical predictions compare the pressure distribution and load capacity considering slip flow with the performance of micro proceeding bearings without slip f]ow for a range of bearing numbers and eccentricities. The results clearly show that the slip flow effect on the static characteristics is considerable and becomes more significant as temperature increases.

• 자원환경지질
• /
• 제44권2호
• /
• pp.153-159
• /
• 2011

본 연구에서는 포괄적 역학모델을 이용하여 석유 생산 시스템의 파이프 내 가스-오일 2상유동에 대한 유동패턴을 결정하였다. 2상의 유체는 운영 인자, 기하학적 변수, 유체 물성 등에 따라 특정의 유동패턴을 나타냈다. 광범위한 기액 겉보기 속도에 대하여 시스템의 인자들을 변화시키면서 유동패턴을 비교하였다. 다양한 인자들 중 경사각과 겉보기 속도가 파이프 내 가스-오일 2상유동의 유용패턴을 결정하는데 가장 지배적인 인자로 나타났다. 파이프 직경, 유체 물성 등의 인자들은 전이 경계선 부근을 제외하면 유동패턴 변화에 제한적인 영향 만을 미쳤다. 역학모델은 실험실 평가나 신뢰성있는 상관식 이용이 불가능할 때 유동패턴을 결정할 수 있는 유용한 도구이다.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.850-862
• /
• 2007

This study was carried out to survey the actual conditions of wastewater treatment facilities to obtain basic data for the management of wastewater from industrial complexes in Chungcheongnam-do province. Wastewater production flow per site area by watersheds was $49.2m^3/km^2/d$ for Sapgyoho, $8.1m^3/km^2/d$ for Anseongcheon, $5.7m^3/km^2/d$ for Seohae, and $2.9m^3/km^2/d$ for Geumgang. Sapgyoho showed 75% of the total production flow, which was the highest value, Geumgang showed 4% of total flow, which was the lowest value. Average total extra rate as production flow/capacity flow in the wastewater treatment facilities for industrial complex is 49%. Considering by watersheds, the extra rates of Seohae, Geumgang, Anseongcheon, and Sapgyoho, are 73%, 65%, 62%, and 33% respectively. This means that the design of capacity flow in wastewater treatment facilities was too large. Effluent concentration of wastewater treatment facilities did not exceed discharge limit mostly. The removal efficiency rate for water quality item was 90% in BOD, 70% in COD, 80% in SS, 30 to 80% in TN, and 20 to 90% in TP, so the organic removal was good, but the nutrient removal was low and interval of variation was high. The removal efficiency rate of the agricultural was industrial complexes is lower than the national and local complexes. The construction cost of the wastewater treatment facilities in Chungcheongnam-do was $1,756Won\;per\;m^3$, treatment cost was $189Won\;per\;m^3$, and they were about two times and 1.2 times higher than the nation-wide cost, respectively. The treatment cost consists of 39% for man power, 21% for chemical, 16% for power, 11% for sludge treatment, and 13% for others.

• 대한산업공학회지
• /
• 제12권1호
• /
• pp.119-131
• /
• 1986

Described in this paper is a modelling methodology for mass production system simulation. The mass production system under consideration consists of various types of flow lines, special purpose production facilities, conveyor lines, palletized carts, and storage facilities. This type of production system is typical in home appliance industry, automobile industry, footwear industry, etc. where a variety of product mix are mass-produced. The modelling methodology is based on the "discrete-event formalism", and an "activity-oriented world view" is adopted to formalize the system description. A distinctive feature of the modelling methodology is that only the static structure (ie, system components) is included in the fixed model. The dynamic structure of the system is specified through a "data-driven" mechanism, which is an extension of the "experimental frame" concept. Each type of system components (ie, flow line, conveyors, carts, etc.) is formally modeled by using Activity Cycle Diagrams. The issue of "model structuring" is also addressed. The modeling methodology has been successfully applied in a real simulation study of a mass production system.