• 제목/요약/키워드: Flow Analysis Code

검색결과 1,185건 처리시간 0.028초

분포형 강우유출모형 병렬화 처리기법 적용 (Application of MPI Technique for Distributed Rainfall-Runoff Model)

  • 정성영;박진혁;허영택;정관수
    • 한국수자원학회논문집
    • /
    • 제43권8호
    • /
    • pp.747-755
    • /
    • 2010
  • 지금까지 분포형 모형은 개념적 모형에 비해 운동역학적인 이론에 근거하여 물의 흐름을 수치해석으로 추적해 나가기 때문에 많은 컴퓨터 메모리용량이 요구되고 계산수행시간이 상대적으로 오래 걸리는 단점이 있었다. 그래서 분포형모형의 적용은 주로 소유역에 국한되어 적용되어왔으며, 대유역에 적용하기 위해서는 격자의 해상도를 낮추거나 소유역 적용과 동일한 해상도에서는 계산 시간이 많이 소요되어 실무적용을 어렵게 하는 요인이 되어왔다. 이에 대해 본 연구에서는 MPI (Message Passing Interface)기법을 적용하여 물리적이고 복잡한 수치계산을 하는 분포형모형의 단점 중 하나인 대유역 적용시의 계산소요 문제를 해결하고자 하였다. 또한 병렬화 기법의 적용효과를 분석하기 위하여 단일 영역에서 계산된 결과와 다수의 소영역으로 분할하여 수행되어진 계산 결과를 비교하였다. 용담댐 유역에 2006년 태풍 '에위니아' 사상을 대상으로 병렬화 계산을 수행한 결과 단일 프로세서에서 분포형모형을 수행하는 것보다 병렬코드에서 수행한 경우가 유출계산 값의 변동 없이 최고 10배에 해당되는 계산시간이 단축되었다.

지하 복합발전 플랜트 내에서의 가스 누출 및 확산 거동에 관한 수치해석 연구 (Numerical Analysis of Gas Leakage and Diffusion Behavior in Underground Combined Cycle Power Plant)

  • 방주원;이성혁
    • 한국산학기술학회논문지
    • /
    • 제18권4호
    • /
    • pp.118-124
    • /
    • 2017
  • 본 연구에서는 상용코드인 Fluent(v.17.1)을 사용하여 수치해석을 진행하였으며, 지하복합발전 플랜트의 형상을 단순화하여 파공 크기 및 파공 위치에 따른 가스 누출에 관한 해석을 진행하였다. 누출 가스는 메탄으로 설정하였다. 파공 크기는 10 mm, 20 mm로 설정하였으며, 파공 위치는 파이프 엘보우 부근, 가스터빈 부근에서 가스가 누출될 경우로 가정하여, 총 4가지 Case에 대해 비교 및 분석을 진행하였다. 가스 누출을 분석하기 위해 연소 하한계의 개념을 바탕으로 누출 거리를 정의하여 종 방향, 횡 방향으로의 거리를 추정하여 정량적으로 분석하였다. 결과적으로 동일 위치에서 파공 크기에 따라 누출거리가 최대 52.3 %의 차이를 보이며 종 방향의 누출 거리가 달라지는 것을 알 수 있었다. 그리고 동일 파공 크기일 때, 파공 위치에 따라 최대 34.8 %의 차이를 보이며 가스의 확산 경향이 달라지게 된다. 공기보다 가벼워 부력의 영향으로 상승하던 가스가 장애물로 인해 수평방향으로 확산이 제한되어 장애물이 없는 경우보다 재순환이 빨라지게 된다. 따라서 종 방향 누출거리와 횡 방향 누출거리가 파공 크기 및 파공 위치에 따라 다른 성장 거동을 보인다. 이와 같은 결과는 지하 복합발전 플랜트와 같은 밀폐공간에서 가스 센서의 위치 및 개수를 최적화 하는데 유용한 데이터가 될 것으로 보인다.

Size-exclusion Chromatography를 활용한 가공식품 중 폴리아크릴산나트륨 분석법 확립 (Analytical Method for Sodium Polyacrylate in Processed Food Products by Using Size-exclusion Chromatography)

  • 정은정;최유정;이근영;윤상순;임호수;김미경;김용석
    • 한국식품위생안전성학회지
    • /
    • 제33권6호
    • /
    • pp.466-473
    • /
    • 2018
  • 가공식품에서 폴리아크릴산나트륨에 대한 분석 방법을 size-exclusion chromatography를 사용하여 개발하고 유통 중인 가공식품에 대해 모니터링 하였다. 분석조건에 대하여 GF-7M HQ column과 UV / VIS 검출기를 피크 모양과 선형성을 기준으로 선택하였으며, 유속, column oven 온도 및 이동상은 각각 0.6 mL/min, $45^{\circ}C$ 및 50 mM sodium phosphate buffer (pH 9.0)으로 선정되었다. 시료의 전처리를 위하여 pH 7.0의 50 mM sodium phosphate buffer로 $20^{\circ}C$, 150 rpm에서 3 시간 동안 추출하였다. 확립된 분석법을 검증한 결과 적절한 선택성을 나타내었으며, 검량선은 50~500 mg/L의 범위에서 선정되었고, 이때 검량선의 상관계수($R^2$)는 0.9985로 나타났다. 폴리아크릴산나트륨의 검출한계(LOD)는 10.95 mg/kg으로 정량한계(LOQ)는 33.19 mg/kg의 값을 얻었으며, 정밀도는 intra-day의 경우 3.0~8.3%를, inter day의 경우 1.3~2.6%로 확인되었다. 정확도는 intra-day의 경우 99.6~127.6%를 나타내었으며, interday의 경우 94.3~121.9%로 확인되었다. 유통 중인 가공식품 125품목을 대상으로 폴리아크릴산나트륨의 함유량을 분석한 결과 40품목에서 검출되었으며, 검출량은 식품첨가물공전의 규격인 0.2% 미만으로 검출되었다. 본 연구결과는 size-exclusion chromatography에 의한 분석방법이 가공식품에서 폴리아크릴산나트륨을 분석하는데 적용할 수 있는 적합한 방법이라는 것을 나타내었다.

수중 무선 전화기의 설계 - 수중무선전화기 설계를 위한 수중소음분석을 중심으로- (The Design of Wireless Underwater Telephone -Analysis of Underwater Background Noise for Wireless Underwater Telephone Design -)

  • 박문갑;윤갑동;김석제;윤종락
    • 수산해양기술연구
    • /
    • 제37권4호
    • /
    • pp.302-307
    • /
    • 2001
  • 본 연구는 잠수기 어업용 수중무선전화기를 설계하는데 있어 최적의 반송 주파수와 송신 신호의 음원 준위를 결정할 목적으로 우리 나라 잠수기 주 조업장의 하나인 거제와 통영 해역의 해양 배경소음과 조업중인 잠수기 어장의 수중 소음에 대하여 검토, 고찰한 결과를 요약하면 다음과 같다. 1. 거제와 통영의 잠수기 어장의 해양 배경 소음을 분석한 결과, 음압 준위는 25∼301kHz 부근에서 가장 낮아 52∼57dB이었고, 주변 통항 선박량과 산업시설이 많은 거제 해역이 통영 해역보다 약 5dB 더 높았다. 2. 거제와 통영의 잠수기 어선의 조업중의 수중소음을 비교하면, 최저 음압준위는 30kHz 부근에서 거제 어장에서는 67dB로서 통영의 62d묘보다 5dB 높은 음압 준위를 나타냈다. 이것은 거제 해역은 잠수기 어선의 규모도 통영 해역의 잠수기 어선보다 약간 크고, 분사기를 사용하여 작업하는데 비해 통영 해역은 잠수기 어선의 크기도 상대적으로 작고, 주 어획 대상물이 달라 분사기를 사용하지 않는 것이 그 원인으로 판단된다. 3. 거제 해역의 패류 채취용 분사기를 사용할 때의 수중 소음의 음압 준위는 102dB었다. 4. 거제 해역의 조업중에 대한 수중 배경 소음을 67dB라 가정할 때, 최대 500m까지 통화하기 위한 송신 신호의 음원 준위는 131dB 정도이다. 그러나, 통영 해역의 잠수기 조업은 분사기를 사용하지 않는 조업으로 이 경우 배경 소음은 약 62dB로서 송신 신호의 음원 준위는 126dB정도이다. 잠수기 조업중이 아닌 경우 즉, 스쿠버 다이버용 수중무선 전화기인 경우에는 배경 소음이 52∼57dB이므로 송신 신호의 음원 준위는 l16∼121dB이면 될 것으로 판단된다. 협동학습 모형이 수학 수업에 보다 발전적으로 널리 적용되기를 기대한다.cal results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of C/sub L/ and C/sub D/ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.erence was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test, no difference was showed in the appearance, but as for the overall palatability

  • PDF

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF