• 제목/요약/키워드: Flotation Technology

검색결과 100건 처리시간 0.023초

차세대 고효율 용존공기 부상공정(High Rate DAF)의 개발 (Development of Dissolved Air Flotation Technology from 1st Generation to the Newest or 3rd One (Very Thick Microbubble Bed) with High Flowrates DAF in Turbulent Flow Conditions)

  • Kiuru, H.J.
    • 상하수도학회지
    • /
    • 제18권2호
    • /
    • pp.228-234
    • /
    • 2004
  • Dissolved air flotation (DAF), in which suspended solids are removed from water by means of micro-size air bubbles raising slowly up in water and lifting solids from water (smaller than those) attached onto the micro-bubbles as well as those (larger than solids) being attached on these, have been used in water and wastewater since 1920s. The dissolved air flotation technology was originally based on the laminar flow conditions prevailing in water to be treated, but the latest development in that technology has led now to a situation, in which the flow conditions may also be turbulent ones in the modem dissolved air flotation units. Despite of that, the flotation phenomenon used in this unit operation for removal suspended solids from water or wastewater is still the same.

STUDY ON GY NEW MINERAL PROCESSING TECHNOLOGY FOR SHIZHUYUAN POLYMETALLIC ORE

  • Zhang, Zhonghan;Li, Xiaodong;Ye, Zhiping;Guo, Jianguan
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.325-330
    • /
    • 2001
  • Shizhuyuan W-Mo-Bi-Ca $F_2$polymetallic ore is classified to the refractory one due to its complex property, fine dissemination and close association of minerals. Through several years of researches, in line with GY new mineral processing technology developed by Guangzhou Research Institute of Nonferrous Metals, in sulfide flotation circuit, an iso-flotability flowsheet is used to replace original overall bulk flotation flowsheet, and in tungsten flotation circuit, a new chelating type-GY reagent and a special pulp-conditioning system and a new technology of wolframite slime flotation are used to replace the traditional "Caustic Soda Method"$_{[1]}$, the metallurgical performance is greatly improved. Besides, GY New Method has created a favorable condition for comprehensive recovery of fluoride from tungsten flotation tailings. Notable economic benefit has been achieved.d.

  • PDF

Application of Enzymatic Hydrolysis for the Yield Optimization in Froth-Flotation of ONP

  • Ryu, Jeong-Yong;Song, Bong-Keun;Song, Jae-Kwang
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
    • /
    • pp.129-136
    • /
    • 2006
  • Although cleaner and cheaper deinking of ONP could be performed at the neutral or low alkaline condition excessive loss from froth-flotation is unavoidable and so reduction of alkali or caustic soda dosage sacrifices recycling yield. Now the new trade-off regarding alkali dosage versus flotation yield is urgently required in order to set the optimized neutral or low alkaline deinking process of ONP. Lipase from Thermomyces Lanuginosus has an effect on desizing and deacetylation reaction and it could be applied to the stock of pre flotation secondary stage in order to reduce the flotation reject without the sacrifice of optical properties of flotation accepts. Instead of inorganic base, lipase could be applied as a biochemical catalyst for the selective modification of valuable hydrophobic particles in deinking stock, for example cellulose fines and inorganic fillers covered by hydrophobic additives or contaminants. When the enzymatic hydrolysis of ester bond could be made on the surface of hydrophobic particulates, unwanted float of fine particles could be prevented. Now the enhancement of flotation selectivity or the modification of the hydrophobicity of deinking stock is expected to be promoted by the enzymatic pre treatment. And the reduction of recycling cost with the saves of raw material, recovered paper would be possible as a result.

  • PDF

Diagnostic metallurgy of porphyry copper-gold deposits in the Pan-Pacific

  • Kim Joe Y.;Kim Sun S.;Shin Hyung J.;Kong Bong S.;Lee Keon K.
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.581-589
    • /
    • 2003
  • The variable flotation response ores from different deposits results basically from mineralogical association and their differences. Development of new techniques for analyzing the metallurgical performance of flotation and other concentration processes is demanded even in the treatment of rather simple ores such as porphyry ores. Diagnostic metallurgical analysis can be used to quantify the most possible recovery processes. Several porphyry copper/gold ores around the world were used to examine the responses in flotation, gravity separation and cyanidation in order to define the linkage between the recovery processes for both copper and old values. Laboratory batch flotation, gravity separation and cyanidation tests were carried out on these samples. All results were used to correlate the relative recovery of copper and gold, and to predict the highest possible metal recovery in the system. The metallurgical predictions were made according to the flotation conditions used and gravity separation. The results of various concentration processes on each porphyry ore samples are presented and discussed. All seven samples have shown significantly different gold/copper metallurgy. The grade/recovery relationships of gold and copper in the laboratory batch tests for the best results and the plants are given in the Figures below. The results of laboratory tests show that the copper recoveries converged to about $90\%$, but the gold recoveries were spread over $55-80\%$, except the K S ore. Series of standard cyanidation tests on the flotation concentrate samples and gravity separation using Knelson Separator on heads ores were carried out to cross-link the metallurgy and mineralogy of gold in the porphyry ores.

  • PDF

순환제지자원의 OMG비율 증가에 따른 지방산과 비이온성 계면활성제의 탈묵효율 비교 (Comparison of Froth-flotation Efficiency between Fatty Acid and Non-ionic Surfactant Added to Recovered Paper with Increased Mixing Ratio of OMG)

  • 서진호;이광섭;이태주;이명구;류정용
    • 펄프종이기술
    • /
    • 제47권4호
    • /
    • pp.88-95
    • /
    • 2015
  • The main sources of recovered paper for newsprint are old newsprint (ONP) and old magazine (OMG). Recently, a lot of advertisement flyers are flowing into bales of ONP and portion of OMG is increasing in recovered paper because the consumption level of coated paper increases. In this study, nonionic surfactant and fatty acid were used as the de-inking agent for froth-flotation process of mixed recovered paper to investigate the effect of increased mixing ratio of OMG. De-inking efficiency of nonionic surfactant decreased as the mixing ratio of OMG increased; ink removal efficiency of froth-flotation is poor, however, the reject ratio increases due to ash from OMG. In comparison with nonionic surfactant, the ash from OMG had a little effect on reject ratio and optical properties of fatty acid applied flotation accept. If nonionic surfactant and fatty acid are added to pulper and flotation cell sequentially, excessive ash from OMG may not give an adverse effect on de-inking efficiency of mixed recovered paper.

인도네시아 잠비산 동광석의 부유선별 특성 연구 (Froth Flotation of Copper Ore from Jambi Deposit, Indonesia)

  • 김학순;전호석;김병곤;백상호
    • 한국광물학회지
    • /
    • 제23권3호
    • /
    • pp.243-250
    • /
    • 2010
  • 인도네시아 잠비산 복합 동광석을 대상으로 고품위 동 정광생산을 위한 부유선별 연구를 수행하였다. 본 연구에 사용된 시료는 대부분 탄산염인 공작석으로 이루어져 있으나, 일부 황화동이 존재하여 자연부유도가 높은 황화동을 먼저 부유선별에 의해 회수한 다음, 침강산물로부터 산화동 회수를 위한 공정을 적용하였다. 먼저 황화동 부유선별에서는 잔세이트(xanthate) 계열의 포수제인 AP-211과 AP-242를 1 : 1의 비율로 300 g/t 첨가하고, 광액 pH 6인 조건에서 Cu 품위와 회수율이 각각 57.7%와 9.5%인 동 정광을 얻었다. 그리고 침전된 산물을 대상으로 지방산 포수제인 올레인산을 300 g/t, 기포제 첨가량 50 g/t, 광액 pH 8.0, 그리고 정선횟수 2회인 조건에서 Cu의 품위와 회수율이 각각 30.8%와 92.1%인 결과를 얻었다. 회수된 황화동 및 산화동 정광을 합산한 결과 최종적으로 Cu의 품위와 회수율이 36.1%와 92.7%인 결과를 얻었다.

용존이산화탄소부상(DCF) 공정의 입자분리 특성과 부상효율 (Particle Separation and Flotation Efficiency by Dissolved Carbon Dioxide Flotation Process)

  • 곽동희;김성진;정흥조;박양균;유영훈;이영동
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.471-478
    • /
    • 2011
  • A series of laboratory experiments carried out to investigate the particle separation efficiency and flotation characteristics using $CO_2$ bubbles. The primary objective of this study was to find out the feasibility of $CO_2$ bubbles as an applicable unit of flotation process in tap-water and wastewater treatment plant. The fundamental measurements were conducted to characterize the $CO_2$ bubble from the physical viewpoint in water including bubble size distribution and rising velocity under various operational conditions. In addition, the removal efficiency of solid was experimented using the lab scale plant applied $CO_2$ bubbles, namely the dissolved carbon dioxide flotation (DCF) process. The DCF process using carbon dioxide bubble, which is an advantage as the decrease and the reuse of Green-House gas, can be a promising technology as an water treatment process. On the other hand, the further research to decrease the bubble size distribution of $CO_2$ is required to enhance the particle separation efficiency.

Recovery of Nickel and Copper from Scraped Nickel Condensers

  • Liang, Ruilu;Kikuchi, Eiji;Kawabe, Yoshishige;Sakamoto, Hiroshi;Fujita, Toyohisa
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.188-192
    • /
    • 2001
  • Magnetic separation and sulphidization-flotation for recovery of nickel and copper from two types of scraped condenser wastes, containing 8- l4% nickel and 2-4% copper, were studied. The effects of magnetic field intensities, classification, and grinding on the recovery of nickel and copper were investigated. According to the characteristics of nickel and copper in the scraps, classification-magnetic separation, different magnetic field intensities, and stages-grinding-cleaning of rough concentrate were investigated. The nickel concentrates containing 38-65% nickel with 84-97% recoveries and the copper concentrates containing 25-43% nickel with 35-60% recoveries were obtained by classification-magnetic separation. In addition, copper concentrates containing 26-45% copper with 76-88% recoveries were obtained by sulphidization-flotation from magnetic tailings and middling products.

  • PDF

카자흐스탄 구리제련소 슬래그 내 구리회수를 위한 선별 특성 (Characteristic of Flotation for Recovery of Copper from Copper Slag in Kazakhstan)

  • 박제현;최의규;최홍일;신승한
    • 자원리싸이클링
    • /
    • 제24권4호
    • /
    • pp.12-21
    • /
    • 2015
  • 일반적으로 구리제련 슬래그내 구리함량은 0.5-3.7% 혹은 그 이상의 높은 비율로 포함되어 있며, 슬래그내 구리회수에 대한 대표적인 방법으로는 부유선별, 침출 그리고 배소가 있다. 본 연구에서는 부유선별법에 의한 구리 회수방법을 검토하였으며, 잔세이트포수제를 이용한 황화부선을 수행하였다. 산성과 알칼리 조건에서 부유선별 특성을 관찰하였으며, pH 4 에서 구리회수율 50%, pH 11 에서 구리회수율 67%로 나타났으며, 특히 pH 11에서는 $100{\mu}m$ 이상의 입자가 정광으로 부유되어 회수율이 상대적으로 높게 나타나는 경향을 보였다. 슬래그 입도를 200 mesh 이하로 분쇄하여 단체분리도를 향상시켜 pH조건별 부유선별 실험을 수행한 결과, 회수율이 78 - 83%까지 향상되는 것을 확인할 수 있었다.

충진 모형실험을 통한 NATM Composite 라이닝 터널 뒤채움재의 기포손실 최소화를 위한 적정 이송거리 고찰 (A Study on the Proper Transfer Distance for Minimizing Air Flotation Loss of Backfilling Material of NATM Composite lining Tunnel in the Model Test)

  • 마상준;최희섭;이흥수;김경덕
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.1555-1558
    • /
    • 2008
  • In this paper, result of whole test, When the Transfer Distance is increasing, Strength of Backfilling Material of NATM Composite lining Tunnel due to increasing Gravity was increased, but that is higher the Air Flotation than increasing Strength. So, That was predicted a drop of Permeability. And Performing the placing Lightweight Foamed Mortar, we think that it's performance in drain material was lost. Therefore We conclude that Proper Transfer Distance that taking Permeability through minimizing of Air Flotation Loss and getting the Need Strength is 50m.

  • PDF