• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.44-51
• /
• 2007

Purpose: Blow-out fracture is one of the most common fractures in facial trauma. It is diagnosed by Computed Tomography(CT) scan, which is considered as the most effective diagnostic tool. Since, the Picture Archiving Communication System(PACS) has been provided recently to many hospitals, doctors are more familiar with imaging software of PACS. Because this software has many useful measuring tools, doctors can measure orbital structure easily and make a plan for treatment with its data. Therefore, authors intended to analyze the data of orbital structure measured with PACS imaging software and evaluate its usefulness. Methods: The charts and CT images of 100 patients, which were 50 patients with medial wall fracture and 50 patients with floor fracture, were reviewed. Patients were selected by pre-determined criteria and their CT images were measured with image software of PACS. 'Extraocular muscle thickness', 'Defect ratio'(ratio of defect area to normal area) and 'Globe position index' were measured and analyzed statistically. Results: The thickness of inferior rectus muscle and medial rectus muscle was simultaneously increased in acute-stage of blow-out fracture. The medial rectus muscle was more thickened in medial wall fracture and inferior rectus was more thickened in floor fracture, respectively. In acute blow-out fracture, globe position is exophthalmic rather than enophthalmic. Especially in floor fracture, numerical value summed up thickness of all extraocular muscle is correlated to the defect ratio and globe position index. Conclusion: Clinicians can decide globe position or presume defect ratio in inferior wall fracture by measurement of CT image in acute blow-out fracture using PACS.

• 한국실내디자인학회논문집
• /
• 제24권3호
• /
• pp.156-164
• /
• 2015

Nursing Homes do not have a defined standard in the space area nor does it have a detailed standard facility requirement by law. This can possibly lead to the deterioration of the facility and the system. This directly affects the medical treatment space area within the nursing home. The medical treatment area provides medical treatment to seniors and this is where the seniors get most of their daily services. Therefore, this is research is about the study of the space area of the medical center and the ratio trend of the space area for the medical treatment facility located in senior nursing homes. Ten facilities have been selected in this study to analyze the correlation factors between space area and its trends. The analysis performed includes the conditions relating to the area and what affects the center. We have followed up with a proposal for improvement of the facility and area configuration for the medical treatment facility. Based on the analysis, the following conclusion can be made: First, the senior welfare centers are mostly used as a residence purpose followed a temporary stay of residence facility for the seniors. Second, research indicates that the bigger the facility, nursing and public functions took a larger portion of the space area compared to other services within the senior welfare centers. Third, the study shows the management space area took up about 1%~6% of the entire medical center within the nursing home which is a narrow space area because of the integrated management. Fourth, analysis based on the trend in the time-series indicate after the adoption of the system, there is a continued decline in the space area of nursing, management and public areas. Lastly, since before and after 2008, the space area composition of the nursing facility shows a continuous decline in our study. We can safely conclude that the revised senior welfare act's construction plan has an effect in the facility and is effectively working to meet its requirement. Therefore, the revision of the law is required to reflect the social needs of the residents.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.155-158
• /
• 2008

Today, apartment is the primary housing type in Korea. In the past, there were many apartment floor plans in the same design way. There have been changes to complex and luxury plans in these days because people want to fit their own needs and wants to the plans. The primary purpose of this study is to analyze interior design trend of medium-large size apartment after year 2000. For that, this study used 7 different construction companies, 13 apartment complexes and 30 unit plan cases which were on sale from April 2007 to April 2008 in Seoul and the Metropolitan area. The results of analysis are as follows: First, most cases had 4LDK and 2bathroom with a dress-room. Second, characteristics of the interior design showed that the variety finish materials used in the units. For wall finish materials, wallpapers were used in mostly regardless in different areas. For floor finish materials, stone and tile were used in similar ratio in the entrance area whereas wood floor mostly was used in living room and kitchen areas. This study shows some significant characteristics of today's apartment even it has some limitations because of small amount of survey cases. More detailed and deeper study will be done continuously.

• 대한영양사협회학술지
• /
• 제23권2호
• /
• pp.180-191
• /
• 2017

The purpose of this study was to identity the probability of cross-contamination from the environment. For this, we examined foodservices at 20 universities/colleges for microbiological analysis of their working facilities and environment as well as their preventive equipment against cross-contamination. Seventy percent of the 20 foodservices were found to maintain one unified working area, which suggests high probability of contamination of food/utensils/equipment in the cooking area by pre-preparation or dish washing. According to the microbiological analysis, the hygiene acceptance ratio of working facilities in the clean zone was 70%, which was higher than the average 45% hygiene acceptance ratio of working facilities in the contamination operating zone. There was a significant difference in the total plate count (P<0.001) and coliform count (P<0.01), which demonstrates that work tables in the clean zone were in a good state compared to those in the contamination operating zone. In the contamination operating zone, refrigerator shelves had a high probability of cross-contamination. Regarding the floor surface and airborne microbes, cooking areas which should be maintained as clean zones had higher cross-contamination probability than those in the contamination operating zone. So corrective actions such as cleaning and sanitizing, keeping dry floors, lowered temperature and humidity, shoe disinfecting facilities, and checking concentrations, are necessary to manage floor surfaces and airborne microbes in the cooking area.

• 한국디지털건축인테리어학회논문집
• /
• 제3권1호
• /
• pp.39-49
• /
• 2003

The height provisions, by the urban planning, describe the hightest height per width division, also define oblique line limitation by road without mentioning the highest per width division. Therefore this study will be a basic model for the standard of measuring the highest height per width division analysizing the propriety of current standard of oblique limitation. This technique is prepared to prevent the confusion and to complements the existing planning method. Therefore, it takes more time to establish this new method and to apply it to the existing condition. This study reviewed density control in District Units Plan, based on the guidelines of density, which included height, ratio of total floor to ground area, and land distribution. This study aims to provide efficient analysis by using current oblique limitation provisions Thus, proving the area rations of general residential areas are decreasing. Since the purpose of the District Units Plan is to avoid confusion and help ease the existing problematic conditions which have risen from the two above-mentioned conventional systems, further observation and research on these areas are necessary.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.557-566
• /
• 2018

The ZEB certification system has come into effect since 2018 according to the ZEB road map. From 2020, the public buildings with the total floor area smaller than $3000m^2$ are the target of the certification, and it will be extended to the buildings with up to $5000m^2$ floor area in 2025. However, current mandatory regulations for public office buildings seem already to meet the ZEB certification system planned for 2025. In this work, two buildings belong to $3,000{\sim}5,000m^2$ in total floor area were selected to analyze the possibility of meeting the ZEB certification only by following current obligation regulations. Results showed that the test buildings satisfied the minimum building energy efficiency and energy self-sufficiency rates for the ZEB certification when the mandatory insulation and installation ratio of renewable energy are applied. This can be useful for revising the road map or extending the target buildings of the ZEB certification.

• 지역연구
• /
• 제35권4호
• /
• pp.61-73
• /
• 2019

도시의 개발과 고밀화는 도시공간의 기온이 주변지역보다 높아지는 도시열섬(Urban Heat Island)현상의 원인이 되고 있으며, 도시열섬현상은 기후변화와 함께 그 강도가 증가하고 있다. 이와 더불어 여름철 도시의 대기온도가 상승할 때 소득이 낮은 계층, 고령인구, 건강에 문제가 있는 사회적 취약계층은 높아진 열환경에 대처할 수 있는 능력이 부족하다. 따라서 본 연구의 목적은 서울시의 열섬지역을 공간통계 기법인 Hotspot 분석을 통해 도출하고, 로지스틱 회귀분석을 활용하여 열섬지역의 물리적 환경과 인구 및 사회경제적 특성을 분석하는 것이다. 서울시 423개 행정동을 대상으로 동별 평균 대기온도를 이용하여 도시열섬 Hotspot 분석을 실행한 결과, 서울시 중구, 종로구, 용산구, 영등포구에서 도시열섬 지역이 집중적으로 분포하는 것을 확인하였다. 로지스틱 회귀분석을 통해 열섬지역의 물리적 환경 특성을 분석한 결과, 주거시설 연면적 비율, 상업시설 연면적 비율, 용적률, 불투수면 비율, 정규화식생지수(NDVI)가 열섬지역에 영향을 미치는 유의한 변수로 나타났다. 또한, 열섬지역의 인구 및 사회·경제적 특성을 고려한 열환경 취약지역을 분석한 결과, 기초생활수급자 비율, 독거노인 비율, 기초생활수급을 받는 독거노인 비율 등이 유의한 변수로 나타났다. 본 연구의 결과는 도시열섬현상에 영향을 미치는 물리적 환경변수를 도출하고 사회적 취약계층의 공간적 분포와 도시열섬지역이 중첩되어 있는 지역을 판별함으로써 향후 취약계층을 고려한 도시 열환경 설계와 정책 개발에 있어 시사점을 제공할 것으로 기대한다.

• 지역연구
• /
• 제39권2호
• /
• pp.63-76
• /
• 2023

최근 대도시 상업지역 내 주거복합건축물의 입지로 인해 도시기능이 상업기능에서 주거기능으로 전환되고 있다. 대전광역시 상업지역 내 용도용적제를 개선하기 위해 특·광역시의 제도를 비교분석하고, 사업대상지 8개소를 분석하여 문제점을 도출하였다. 첫째, 주거복합건축물의 용도 분류의 명확화, 둘째, 상업지역의 기능 상실에 대한 도시 계획적 불균형, 셋째, 개발밀도의 차이로 도시환경의 훼손이다. 이에 개선방안으로는 첫째, 주거기능과 용도복합의 비율을 최소 10% 이상 확보하고, 둘째, 다양한 용도와 기능을 융·복합화된 시설을 유도하여 도시경쟁력을 확보하고, 용도용적제 폐지를 통한 공동주택의 일괄적인 용적률을 적용하며, 셋째, 지구단위계획 수립 및 자문을 통한 개발밀도를 제시하였다.

• 대한두개안면성형외과학회지
• /
• 제22권2호
• /
• pp.85-92
• /
• 2021

Background: Patients with secondary deformities associated with unilateral cleft lip and nose might also suffer from nostril stenosis due to a lack of tissue volume in the nostril on the cleft side. Here, we used full-thickness skin grafts (FTSGs) to reduce nostril stenosis and various methods for skin volume augmentation. We compared the changes in the symmetry of both nostrils before and after surgery. Methods: From February 2016 to January 2020, 34 patients underwent secondary cheiloplasty and open rhinoplasty for secondary deformities of the unilateral cleft lip and nose with nostril stenosis. FTSG was used on the nostril floor, nasal columella, and alar inner lining. The measured nasal profile included the nostril surface, nostril circumference, width of the nostril floor, and distance from the alar-facial groove to the nasal tip. The "overlap area," which was defined as the largest overlapping area when the image of the cleft nostril was flipped to the left and right and overlaid on the image of the normal side nostril, was also calculated. The degree of symmetry was evaluated by dividing the value of the cleft side by that of the normal side of each measured profile and expressed as "ratios." Results: The results of all profile ratios, except for the nostril floor width, became significantly close to 1, which represents full symmetry. The overlap area ratio improved from 62.7% to 77.3%, meaning that the length and width of the nostril as well as the overall shape became similar (p< 0.05). Conclusion: When performing cleft rhinoplasty with nostril stenosis, FTSG is useful to achieve symmetry in the nostril size and shape. Skin grafting is simpler to perform than the other types of local flap, and the results are generally satisfactory.

• Architectural research
• /
• 제24권3호
• /
• pp.85-91
• /
• 2022

The public rental housing policy aims to provide the housing to the vulnerable class who do not have enough credit to own houses. The Korean government introduced new policies for housing supply to improve the availability of new houses. However, it is difficult to expand the supply because of the accumulated deficit of public rental housing. In this study, the economic feasibility of long-term public rental housing reconstruction projects was examined to ensure the economic and sustainable growth of public rental housing. The research found that the compensation for the accumulated deficit is needed. Also the research analyzed and identified the factors affecting the economic feasibility of reconstruction projects. The significant factors identified in this research are: the supply price of pre-sale/rental housing in the reconstruction project, total cost of the reconstruction project, and total floor area of the reconstruction project. According to the analysis results, it is necessary to increase the rent of existing long-term public rental housing, expand the government subsidy, increase the supply price of pre-sale/rental housing, and reduce the total project cost. However, there are limitations. For example, the fluctuations of construction market, residents' burden of housing costs, and the limit of the budget of the public housing authority. The increasing total Floor Area Ratio(FAR) limitation of the reconstruction project would be the realistic solution to the problem because it gives incentives to the reconstruction project.