• 제목/요약/키워드: Floc

검색결과 222건 처리시간 0.035초

점착성 퇴적물의 염분과 퇴적물농도에 따른 플럭 특성: 플럭카메라를 이용한 실험연구 (Floc Property of Yeongsan Cohesive Bed Sediment with Respect to Salinity and Sediment Concentration)

  • 신현정;;이관홍
    • 한국해양학회지:바다
    • /
    • 제18권3호
    • /
    • pp.122-130
    • /
    • 2013
  • 점착성 퇴적물이 다른 광물입자 혹은 유기물과 결합하여 형성되는 플럭(floc)을 현장에서 관측하기 위한 플럭카메라 시스템을 제작하였다. 본 연구의 목적은 실험실에서 플럭카메라 시스템을 검증하고 영산강 점착성 해저 퇴적물의 플럭 특성을 규명하는 데 있다. 플럭카메라 시스템의 검증은 $88-125{\mu}m$$63-88{\mu}m$의 체에 걸러진 모래를 사용하였다. 플럭카메라 영상을 통해 분석한 평균입경은 각각 102와 $65.2{\mu}m$고, 침강속도는 각각 6.7과 5.9 mm/s이다. 카메라 심도에서 벗어난 입자는 실제 크기보다 크거나 작게 측정이 되는 현상으로 인해 체의 범위를 벗어난 입자가 관측되지만, 입경과 침강속도의 평균값에 대한 95% 신뢰수준 오차가 체의 범위에 속하므로 플럭카메라를 이용한 분석을 신뢰할 수 있었다. 영산강 하구의 해저 표층 퇴적물을 0 psu의 증류수에 0.1 g/L 퇴적물 농도로 관측한 평균 입경은 약 $40.6{\pm}0.66{\mu}m$, 침강속도는 1.4 mm/s 프랙탈 차원은 2.86이었다. 추가적으로 10과 34 psu의 염분과 0.1 및 0.3 g/L의 퇴적물 농도에서 관측한 평균입경과 침강속도는 서로 유사했고, 그 값들은 오차범위 내에 존재한다. 플럭카메라 관측을 통해서 얻은 플럭의 빠른 침강속도와 프랙탈 차원은 유기물 함량이 상대적으로 적은 표층퇴적물의 특성을 반영한다. 또한, 염분과 퇴적물 농도를 변화시켰음에도 플럭의 입경 변화가 거의 없는 것은 플럭을 형성에 충분한 난류 강도가 주어지지 못했기 때문이라고 판단된다. 향후에는 염분, 퇴적물 농도 및 외력의 변화에 따른 플럭의 특성을 밝히는 연구가 필요하다.

Effects of Aerobic and Non-Aerobic Starvation on SBR Performance When Treating Saline Wastewater

  • Moon, Byung-Hyun;Park, Kyung-Hun;Kim, Sang-Soo;Yoon, Cho-Hee
    • Environmental Engineering Research
    • /
    • 제17권3호
    • /
    • pp.139-144
    • /
    • 2012
  • In this study, the effects of starvation on floc characteristics when treating saline wastewater using a sequencing batch reactor (SBR) were investigated. The effectiveness over 5 days of starvation for aerobic and non-aerobic strategies for maintaining the physical characteristics of floc-forming sludge and the recovery period needed to regain the initial pollutant removal efficiency were investigated. Experiment results revealed that the sludge volume index (SVI) increased and the floc size and fractal dimension decreased after starvation under both aerobic and non-aerobic conditions. Sludge settleability deteriorated faster under aerobic conditions compared to non-aerobic conditions. Under non-aerobic conditions, the SBR required less time to return to its initial pollutant removal efficiency and settleability. Floc size, fractal dimension, and SVI were observed to be fairly correlated with each other. The results demonstrated that it was better to maintain the sludge under non-aerobic rather than aerobic starvation, because it adapted to, resisted starvation and had a quicker re-start afterward.

Production of Cellulase by Trichoderma reesei Rut C30 in a Batch Fermenter

  • Yu, Xiao-Bin;Yun, Hyun-Shik;Koo, Yoon-Mo
    • Journal of Microbiology and Biotechnology
    • /
    • 제8권6호
    • /
    • pp.575-580
    • /
    • 1998
  • Cellulase production by batch culture using the Trichoderma reesei Rut C30 strain with various concentrations of Solka Floc with 1 % wheat bran was studied in a 2.5 I fermenter. The cellulase activity increased with Solka Floc concentration up to 5%. When 5% Solka Floc and 1% wheat bran were contained in the medium, carboxymethyl cellulose (CMC) and filter paper (FP) activities were 232.4 U/$m\ell$ and 21.25 U/$m\ell$, respectively. The productivity was 143.6 FPU $1^{-l}h^{-1}$ and the yield was 425 FPU/g. The colonial morphology of T. reesei Rut C30 grown on Avicel agar plates and the changes in mycelial morphology of T. reesei Rut C30 with culture time are also presented.

  • PDF

Cellulase Production in Fed-Batch Culture by Trichoderma reesei Rut C30

  • Yu, Xiao-Bin;Yun, Hyun-Shik;Koo, Yoon-Mo
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권1호
    • /
    • pp.44-49
    • /
    • 1999
  • Cellulase production by fed-batch cultivation of Trichoderma reesei Rut C30 with various initial concentrations of Solka Floc in 1 % wheat bran-containing medium was investigated. The cellulase activity and productivity increased with initial Solka Floc concentration up to 5%. When a total Solka Floc concentration of 90 g/l was used for cellulase production, CMC (carboxymethyl cellulose) and FP (filter paper) activities, productivity, and yield were 359.7 U/ml, 30.61 U/ml, 161 FPU $L^{-1}$ $h^{-1}$, and 340 FPU $g^{-1}$, respectively. It was important to maintain a high cell concentration during cellulase production to obtain high cellulase activity and productivity. Cellulase powder was prepared by ammonium sulfate precipitation: FP activity was 396.7 U/g and CMC activity was 6481 U/g.

  • PDF

SBR을 이용한 염분함유폐수의 처리시 호기성 및 혐기성 starvation이 생물학적 floc의 형태특성 변화에 미치는 영향

  • 김상수;문병현;서규태;이택순;김태성
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2006년도 추계 학술발표회 발표논문집
    • /
    • pp.362-364
    • /
    • 2006
  • Starvation 동안 슬러지를 폭기시킨 경우 floc의 크기감소가 더 크게 일어났다. SBR의 재운전으로 회복된 floc의 크기는 슬러지를 폭기시키지 않은 경우 starvation 이전과 비교하여 더 커졌으며, 슬라지를 폭기시킨 경우 starvation 이전보다 작아졌다. Starvation 동안 슬러지를 폭기하지 않은 경우 fractal dimension은 큰 폭으로 감소하지만, 폭기하였을 때는 감소폭이 매우 작았다. 이후 SBR의 재운전으로 인한 fractal dimension은 증가하였다. 슬러지의 침강성은 starvation 동안 폭기한 경우 폭기하지 않은 경우보다 SBR 재운전 직후 슬러지의 침강성이 더 불량하였으며, starvation 동안 폭기하지 않았을 때 슬러지 침강성의 회복현상이 나타났지만, 폭기를 수행한 경우 침강성의 회복이 느리게 일어났다. Starvation 동안 슬러지의 폭기 및 비폭기 수행결과 침강성은 fractal dimension보다 floc의 크기에 더 크게 좌우되는 것으로 나타났다.

  • PDF

고해하중변화에 의한 탈수성과 탈수영향 인자 분석 (Characteristics of Stock Drainage Depending on Refining Load and Analysis of Drainage Factors)

  • 장현성;박종문
    • 펄프종이기술
    • /
    • 제36권2호
    • /
    • pp.10-16
    • /
    • 2004
  • Structures and strengths of paper have been studied by analyzing fibers characteristics depending on refining methods. Mixing ratio of softwood and hardwood fibers and fibers characteristics have been analyzed for paper quality improvement. In this study flocculation and drainage of fibers were analyzed to improve the production efficiency and paper product's quality. Floc size and drainage rate depending on stock consistency and fines content were analyzed. Total amount of drainage during drainage process was measured quantitatively by using DI(drainage index). Floc size, viscosity of floc and dewatering times were also measured. In the case of refining load $2.8 kg_f$ , drainage was occurred by filtration mechanism rather than thickening mechanism because drainage resistance increased by fibrillation of fibers. Therefore, the drainage rate of $2.8 kg_f$ refining load stock was slower than that of $5.6 kg_f$.

퇴적물 floc의 특성 파악을 위한 유속 및 부유사 농도 변화 관측 (Measurements of Velocity and Suspended Sediment Concentration for Understanding of Property of Sediment floc)

  • 정의택;양수현;김동호;황규남
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2012년도 학술발표회
    • /
    • pp.717-721
    • /
    • 2012
  • 유속(혹은 난류강도) 증감에 따른 floc 특성의 변화를 파악하기 위하여, 현재 연안 개발이 활발히 수행되고 있는 목포해역을 대상으로 ADCP를 이용한 층별 유속 및 부유사 농도의 연속관측이 수행되었다. 목포해역 내 대표정점에서 층별로 유속 유향 및 음파 intensity와 함께 전체 수심데이터가 5분 간격으로 측정되었으며, ADCP 음파의 intensity와 부유사 농도의 상관관계 분석을 위하여 동일 시간동안 채수기를 이용하여 water sampling(30분 간격) 또한 동시에 수행되었다. 관측시간 동안의 목포해역은 낙조류의 흐름특성을 가지며, 표층에서의 최강유속은 24.5cm/s, 유향은 대체적으로 NW~N향 사이에 분포하는 것으로 나타났다. 또한 층별 부유사 농도는 그 차이가 매우 미미한 것으로 나타났다. 본 연구를 통하여 관측된 자료들은 퇴적물의 제반 이송특성 연구를 위한 기초자료로 활용될 수 있을 뿐만 아니라, 향후 퇴적물 이송 및 수질 예측/평가를 위한 수치모형 적용시 입력자료로 유용하게 사용될 수 있을 것이다.

  • PDF

Trichoderma reesei를 이용한 섬유소 분해 효소의 생산에 있어서 혼합탄소원의 영향 (Effects of Mixed Carbon Sources on the Production of Cellulase by Trichoderma reesei)

  • 남주헌;구윤모;윤현식
    • 한국균학회지
    • /
    • 제26권2호통권85호
    • /
    • pp.239-245
    • /
    • 1998
  • 섬유소를 분해하여 이용하기 위해서는 섬유소 분해효소를 대량으로 생산하는 것이 중요하며 이를 위해서는 적절한 탄소원을 이용하여 섬유소 분해효소의 대량생산을 유도하는 것이 중요하다. 본 실험에서는 Trichoderma reesei Rut C-30을 섬유소 분해효소의 생산 균주로 solka floc을 탄소원으로 사용하여 섬유소 분해효소의 활성을 증가시키기 위한 배지내 최적 농도가 1%이고 포도당이 0.5%이상 배지에 첨가 될 경우 섬유소 분해효소의 생산이 저해됨을 알 수 있었다. 정제된 섬유소인 solka floc이 목질섬유소인 wheat bran과 함께 탄소원으로 사용되었을 때 각각을 섬유소 분해효소 생산의 유도 물질로 이용했을 때보다 더 높은 CMCase 활성과 FPase 활성을 보였다. Solka floe 1%와 wheat bran 3%을 탄소원으로 사용한 배지의 CMCase 활성이 76 U/ml, FPase 활성이 12.6 U/ml로 가장 높은 값을 나타내었다.

  • PDF

침전지내 흐름 및 플럭의 이동 특성에 관한 연구 (The Characteristics of Flow and Movement of Floc in the Sedimintation Basin)

  • 최계운;김정현;이면주
    • 한국수자원학회논문집
    • /
    • 제32권2호
    • /
    • pp.177-184
    • /
    • 1999
  • 본 논문에서는 방사성 동위원소를 사용하여 침전지내에서의 흐름 및 플럭의 이동특성에 관한 연구를 실시하였다. 흐름 이동특성 실험을 위하여는 Tc-99m 동위원소를, 플럭이동 특성실험을 위하여는 벤토나이트에 Tc-99m 동위원소를 흡착시킨 재료가 사용되었다. 흐름 이동특성 실험결과 침전지내 위치에 따라 유속이 상이하고 깊이에 따라서도 유속이 상이한 흐름임이 밝혀졌다. 또한, 침전지 유입 유량이 변화할 때 플럭의 이동거리가 상이하며, 유량이 증가할수록 침전위치가 유입구로부터 멀어지며 침전제거효율이 감소한다. 침전지 내 깊이에 따라 플럭의 이동속도나 밀도변화가 다르게 나타난다.

  • PDF

세라믹 분리막의 분산형 용수공급 시스템 적용을 위한 전처리 연계공정의 고플럭스 평가 (Evaluation of High Flux Combined with Pretreatment Process for Application of Decentralized Water Supply System with Ceramic Membrane)

  • 강준석;박서경;이정은;강소연;이정준;쿠엔 보;김성수;김한승
    • 한국수처리학회지
    • /
    • 제26권6호
    • /
    • pp.61-72
    • /
    • 2018
  • In this study, applicability of the decentralized water supply system were investigated by the high flux evaluation using ceramic membrane with combined pretreatment process. A) filtration process increased the transmembrane pressure of 1.4 kPa and 89.5 kPa on 2 and $5m^3/m^2{\cdot}d$ of filtration flux, respectively, the physical backwashing recovery rate were less than 28.6%. The (B) Coag./Floc. - Sedi. combined process with 4 mg / L of A-PAC showed that the transmembrane pressure increased to within 6 kPa, the physical backwashing recovery rate was over 37.9 % higher than (A) Filtration process. (C) Coag./Floc. combined process showed an increase of transmembrane pressure compared with (B) Coag./Floc. - Sedi. combined process, physical backwashing recovery rate was over 84%. As a result of the membrane fouling analysis using the resistance in series model, the combined pretreatment process showed that the cake resistance (Rc) was more than 92% at membrane filtration flux of $2m^3/m^2{\cdot}d$. In the (C) Coag./Floc. combined process, cake resistance(Rc) was over 86% on high flux conditions. The coagulation floc contained in influent was removed by the membrane, and the cake layer formed with the removed floc was identified as reversible fouling resistance which could be recovered by physical backwashing. The decentralized water supply system, which has the limitation of site area and installation space, is considered to could be operation of high flux of ceramic membrane by applying (C) Coag./Floc. combined process without sedimentation process.