• Wind and Structures
• /
• 제22권5호
• /
• pp.525-541
• /
• 2016

An offshore wind turbine supported by a spar buoy floating platform is the subject of this study on tower and rotor extreme loads. The platform, with a 120-meter draft and assumed to be sited in 320 meters of water, supports a 5 MW wind turbine. A baseline model for this turbine developed at the National Renewable Energy Laboratory (NREL) is employed in stochastic response simulations. The support platform, along with the mooring system consisting of three catenary lines, chosen for loads modeling, is based on the "Hywind" floating wind turbine concept. Our interest lies in gaining an understanding of the dynamic coupling between the support platform motion and the turbine loads. We first investigate short-term response statistics using stochastic simulation for a range of different environmental wind and wave conditions. From this study, we identify a few "controlling" environmental conditions for which long-term turbine load statistics and probability distributions are established.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.22-32
• /
• 2013

This paper presents the conceptual design procedure for the taut-leg mooring lines of a floating-type combined renewable energy platform. The basic configuration of the platform is determined based on an understanding of floating offshore plants. The main dimensions and mass distribution are determined based on a hydrostatic calculation. To identify the motion history of the floating platform and the tension history of the mooring lines, a hydrodynamic analysis is executed using Ansys.Aqwa. This helps in the selection of the best configuration for the mooring system such as the number of mooring lines, wire types, anchored positions, etc. In addition, the fatigue life of the mooring lines can be predicted from the tension history using the rain-flow cycle counting method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.62.1-62.1
• /
• 2011

The wind can be stronger and steadier further from shore, but water depth is also deeper. Then bottom-mounted towers are not feasible, and floating turbines are more competitive. There are additional motions in an offshore floating wind turbine, which results in a more complex aerodynamics operating environment for the turbine rotor. Many aerodynamic analysis methods rely on blade element momentum theory to investigate aerodynamic load, which are not valid in vortex ring state that occurs in floating wind turbine operations. So, vortex lattice method, which is more physical, was used in this analysis. Floating platform's prescribed positions were calculated in the time domain by using floating system RAO and waves that are simulated using JONSWAP spectrum. The average value of in-plane aerodynamic force increase, but the value of out-of-plane force decrease. The maximum variation aerodynamic force abruptly increases in severe sea state. Especially, as the pitch motion of the barge platform is large, this motion should be avoided to decrease the aerodynamic load variation.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.48-57
• /
• 2012

This paper deals with numerical analyses in the context of estimations of hydrodynamic motions and dynamic loads for a floating type offshore platform using some exclusive simulation code such as code for the simulation of a floating type of offshore crane based on multi-body dynamics, along with the commercial code AQWA. Verifications of numerical models are carried out by comparing the RAO results from the simulation code. In the verification analyses, hydrodynamic motions are examined in the frequency domain for the floating type offshore platform according to the mooring lines. Both the hydrodynamic motions and dynamic loads are estimated for floating type offshore platforms equipped with the catenary type and taut mooring lines. A review and comparison are carried out for the numerically estimated results. The structural safety of the connection parts in an offshore structure such as a floating type offshore platform is one of the most important design criteria in view of fatigue life. The dynamic loads in the connecting area between a floating type offshore platform and its mooring lines are estimated in detail according to variations in the mechanical properties of the mooring lines. The dynamic tension load on the mooring lines is also estimated.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.328-330
• /
• 2018

태양 에너지를 전기 에너지로 변환시키는 장치가 설치된 해상 부유체는 파도에 의해서 운동한다. 해상 부유체의 안전성을 평가하기 위해서는 부유체 운동의 측정과 해석이 필요한데, 일반적으로 6자유도 운동을 이용한다. 6자유도 운동은 저전력, 소형, 저가의 특징을 갖고 있는 MEMS(Micro-Electro Mechanical System)를 이용하여 측정할 수 있다. 문제는 MEMS의 낮은 정밀도이다. 본 연구에서는 이러한 MEMS를 이용한 해상 태양광 부유체의 거동을 측정하고, 측정한 거동을 이용한 안전성 평가 기법에 관하여 검토하였다. 연구결과 3축의 가속도계와 3축의 자이로스코프를 이용한 관성 측정 플랫폼을 통해서 해상 부유체의 모델링과 안전성 평가가 가능함을 알았다.

• 한국해양공학회지
• /
• 제32권1호
• /
• pp.9-20
• /
• 2018

The present study deals with the conceptual design of a motion reduction device for a floating wave-offshore wind hybrid power generation platform. A damping plate attached to the bottom of a column of a large semi-submersible is introduced to reduce the motion of the platform. Performance analyses on various shapes and configurations of damping plates were performed using the potential flow solver, and the appropriate configuration and size of the damping plate were selected based on the numerical results. In order to see the effect of viscous damping, a small scale model test was performed in a 2D wave flume. The performances of five different damping plates were measured and discussed based on the results of free decay tests and regular wave tests.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권4호
• /
• pp.179-191
• /
• 2016

As the demand for renewable energy has increased following the worldwide agreement to act against global climate change and disaster, large-scale floating offshore wind systems have become a more viable solution. However, the cost of the whole system is still too high for practical realization. To make the cost of a floating wind system be more economical, a new concept of tension leg platform (TLP) type ocean floating wind system has been developed. To verify the performance of a 5-MW TLP type ocean floating wind power system designed by the Korea Advanced Institute of Science and Technology, the FAST simulation developed by the National Renewable Energy Laboratory is used. Further, 1/50 scale model tests have been carried out in the ocean engineering tank of the Research Institute of Medium and Small Shipbuilding, Korea. This paper compares the simulation and ocean engineering tank test results on motion prediction and tension assessment of the TLP anchor.

• Wind and Structures
• /
• 제18권3호
• /
• pp.267-279
• /
• 2014

Hydrodynamic analyses of classic and truss spar platforms for floating offshore wind turbines (FOWTs) were performed in the frequency domain, by considering coupling effects of the structure and its mooring system. Based on the Morison equation and Diffraction theory, different wave loads over various frequency ranges and underlying hydrodynamic equations were calculated. Then, Response Amplitude Operators (RAOs) of 6 DOF motions were obtained through the coupled hydrodynamic frequency domain analysis of classic and truss spar-type FOWTs. Truss spar platform had better heave motion performance and less weight than classic spar, while the hydrostatic stability did not show much difference between the two spar platforms.

• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.368-375
• /
• 2018

본 연구에서는 부유식 플랫폼의 6자유도 방향으로의 주기 운동이 로터 공력 성능에 미치는 영향을 확인하기 위해 부유식 해상 풍력터빈에 대한 공력 해석이 수행되었다. 수치 해석을 위해 블레이드 요소 운동량 방법을 이용하였으며, 유동 박리와 후류 영향에 의한 비정상 공력 효과를 포착하기 위해 인디셜 응답 방법에 기반한 동적 실속 모델을 이용하였다. 로터에 의해 유도되는 내리 흐름은 운동량 이론과 난류 후류 상태에 대한 경험적 모델을 연계하여 계산하였다. heave, sway, surge 방향으로의 병진 운동과 roll, pitch, yaw 방향으로의 회전 운동을 포함한 플랫폼 주기 운동을 고려하였으며, 각각의 모션은 사인함수 형태로 적용되었다. 수치해석을 위한 대상 풍력터빈으로는 NREL 5MW 풍력터빈이 사용되었다. 해석 결과로부터 세 방향 병진 운동 모드 중, surge 운동 시 로터 공력 변화가 상대적으로 크게 나타났으며, 회전 운동 모드의 경우, pitch 운동에 의해 로터 공력이 크게 변화됨을 확인할 수 있었다.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.171-179
• /
• 2011

This paper presents the concept design procedure of a floating-type combined renewable energy platform based on hydrodynamic analyses and is focused on the fatigue design of taut-type mooring lines of the platform. Two types of combined renewable energy platforms are considered: a combination of wind turbine, wave turbine and photovoltaic energy plant and a combination of wind turbine, current turbine and photovoltaic energy plant. The basic configurations are conceptually determined from the understanding of floating offshore plants, while the main dimensions have been determined based on a hydrostatic calculation. Fully coupled hydrodynamic analyses have been carried out to identify the motion characteristics of the floating body and the tension histories of the mooring lines. The tension history is used for the fatigue life prediction based on the rain-flow cycle counting method. For the fatigue life prediction, tension life curves from API and the Palmgren-Miner rule are employed.