• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.82-90
• /
• 2003

Recently, a new concept of telecommunication system, utilizing stratospheric platforms such as airships or airplanes, has been proposed. This system aims to provide broadband multimedia services, i.e. high-rate multimedia service, high-rate internet service, and leased line service. In this study, operation concept of the system is defined and by allocating required functions on the system and its subsystems, conceptual design of the ground control system for the stratospheric platforms is established and proposed.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.249-260
• /
• 2022

Student pilots receiving flight education are inexperienced in piloting and situation judgment skills and are greatly affected by various factors such as psychological, physical, and environmental factors. In particular, one of the most influential factors in the flight education of student pilots is the weather conditions. Unlike large aircraft used in the air transportation business, small aircraft used for flight education have a great impact on education, such as flight restrictions depending on weather conditions, psychological pressure in severe weather, and deterioration of student skills. Therefore, in this study, the meteorological characteristics of meteorological factors that have a great influence on small aircraft were analyzed. As a result of the analysis, an efficient and safe training operation method was suggested to a professional pilot aviation training organization through the adjustment of the training period for the season, the increase in aircraft operation rate, and a safe solo flight plan considering the weather.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.97-107
• /
• 2011

This paper describes efficient flight control algorithms for building a reconfigurable ad-hoc wireless sensor networks between nodes on the ground and airborne nodes mounted on autonomous vehicles to increase the operational range of an aerial robot or the communication connectivity. Two autonomous flight control algorithms based on adaptive gradient climbing approach are developed to steer the aerial vehicles to reach optimal locations for the maximum communication throughputs in the airborne sensor networks. The first autonomous vehicle control algorithm is presented for seeking the source of a scalar signal by directly using the extremum-seeking based forward surge control approach with no position information of the aerial vehicle. The second flight control algorithm is developed with the angular rate command by integrating an adaptive gradient climbing technique which uses an on-line gradient estimator to identify the derivative of a performance cost function. They incorporate the network performance into the feedback path to mitigate interference and noise. A communication propagation model is used to predict the link quality of the communication connectivity between distributed nodes. Simulation study is conducted to evaluate the effectiveness of the proposed reconfigurable airborne wireless networking control algorithms.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.4
• /
• pp.66-73
• /
• 2006

This study focuses on the economies of launching regular air services between capital cities of South Korea and North Korea. The demand for traveling between these two cities is too small to justify scheduled air service. However, it may be possible to provide regular air service by utilizing via flight of incumbent Seoul-Beijing flights. There are numerous flight services between Seoul and Beijing and we may allow some of the Seoul-Beijing flights to stop by Pyung Yang for commercial traffic handling. This study tries to find the optimal discount rate which passengers traveling between Seoul and Beijing via Pyung Yang, the idea is reasonable considering the inconvenience of stopping at Pyung Yang. The Stated Preference Techniques are applied for the study. The required data were collected through interviews of passengers traveling from Seoul to Beijing. The major variables that are considered in flight choice are air fare, flying time, and flight frequency. The relative importance of these major variables is estimated by the logit models calibrated with stated preference data.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.70-77
• /
• 2022

This study is a study to analyze the stress difference of pilots according to the category of aircraft. According to previous studies, pilot stress is affected by several factors such as flight time, fatigue regulation, and operating environment, and it is known that stress also affects cardiac variability. In this paper, we analyzed that there is a difference in stress according to the operating environment through airline pilots and pilots of educational institutions, and then tested the difference in stress between airplane pilots and helicopter pilots. This study differs in that it is a study that has almost no empirical research on pilot fatigue and stress considering the role of flight crew members and operational conditions for each mission. If we expand and verify the sample of the results for the stress difference in the future, it will be a great contribution to practical aviation safety research in connection with the fatigue risk management system in the future.

• Advances in aircraft and spacecraft science
• /
• v.8 no.4
• /
• pp.289-302
• /
• 2021

Ensuring flight safety for passengers as well as crew is the most important aspect of modern aviation, and in order to achieve this, it is necessary to be able to forecast the durability of individual components. The present contribution illustrates the results of a computational analysis to determine the possibility of analysing the prediction of bearing durability in on-board rotating equipment from the point of view of thermal fatigue.In this study, a method developed at the Air Force Institute of Technology was used for analysis, which allowed to determine the bearing durability from the flight altitude profile. Two aircraft have been chosen for analysis - a military M-28 and a civilian Embraer. As a result of the analysis were obtained: the bearing durability in on-board rotating devices, average operation time between failures, as well as failure rate. In conclusion, the practical applicability of this approach is demonstrated by the fact that even with a limited number of flight parameters, it is possible to estimate bearing durability and increase flight safety by regular inspections.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.359-367
• /
• 2018

The vortex ring state that occurs during the descending flight of a rotorcraft generates a circulating flow like a donut near the rotating surface, and it often causes a rotorcraft fall due to loss of thrust. In this paper, we have physically identified the flow field in the vortex ring state of the quadcopter, one of the types of unmanned aerial vehicles. The descending flight of the quadcopter was simulated in a 1m subsonic wind tunnel of the Korea Aerospace Research Institute(KARI) and the Particle Image Velocimetry(PIV) was used for the flow field measurement. The induced velocity in the hovering state is estimated by using the momentum theory and the test was carried out in the range of descent rate at which the vortex ring condition could be caused. The development and the direction of the vortex ring were confirmed by the measurement of the flow field according to not only the descent rate but also propeller separation distance. In addition, the results of the study show the vortex ring state can be predicted sufficiently by measuring the flow velocity around the quadcopter.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.199-202
• /
• 2008

The advantage of ultrasonic burning rate measurement of solid propellant is measuring burning rates with wide range of pressure in a single test. In the ultrasonic method, instantaneous thickness of solid propellants as function of pressure or time were measured using time of flight(TOF) of ultrasonic signals. So, uncertainties of the measured burning rates by ultrasonic method have to evaluate with variation of pressure, TOF and initial propellant thickness. In this study, we evaluated uncertainties of ultrasonic method for measuring burning rates on the types 317 and the 318 propellants.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.888-897
• /
• 2015

A flight capability to take a terrain following flight near the ground is required to reduce the probability that a fighter aircraft can be detected by foe's radar fence in the battlefield. The success rate for mission flight has increased by adopting TFS (Terrain Following System) to enable the modern advanced fighter to fly safely near the ground at the low altitude. This system has applied to the state-of-the-art fighter and bomber, such as B-1, F-111, F-16 E/F and F-15, since the research begins from 1960's. In this paper, the terrain following system and GCAS (Ground Collision Avoidance System) was developed, based on a digital database with UTAS's TERPRROM (TERrain PROfile Matching) equipment. This system calculates the relative location of the aircraft in the terrain database by using the aircraft status information provided by the radar altimeter and the INS (Inertial Navigation System), based on the digital terrain database loaded previously in the DTC (Data Transfer Cartridge), and figures out terrain features around. And, the system is a manual terrain following system which makes a steering command cue refer to flight path marker, on the HUD (Head Up Display), for vertical acceleration essential for terrain following flight and enables a pilot to follow it. The cue is based on the recognized terrain features and TCH (Target Clearance Height) set by a pilot in advance. The developed terrain following system was verified in the real-time pilot evaluation in FA-50 HQS (Handling Quality Simulator) environment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.703-712
• /
• 2004

A variant of the magnetoplasma jet engine (magjet) is here proposed for airbreathing flight in the hypersonic regime. As shown in Figure 1, the engine consists of two distinct ducts: the high-speed duct, in which power is added electromagnetically to the incoming air by a momentum addition device, and the fuel cell duct in which the flow stagnation temperature is reduced by extracting energy through the use of a magnetoplas-madynamic (MPD) generator. The power generated is then used to accelerate the flow exiting the fuel cells with a fraction bypassed to the high-speed duct. The analysis is performed using a quasi one-dimensional model neglecting the Hall and ion slip effects, and fix-ing the fuel cell efficiency to 0.6. Results obtained show that the specific impulse of the magjet is at least equal to and up to 3 times the one of a turbojet, ram-jet, or scramjet in their respective flight Mach number range. Should the air stagnation temperature in the fuel cell compartment not exceed 5 times the incoming air static temperature, the maximal flight Mach number possible would vary between 6.5 and 15 for a magnitude of the ratio between the Joule heating and the work interaction in the MPD generator varied between 0.25 and 0.01, respectively. Increasing the mass flow rate ratio between the high speed and fuel cell ducts from 0.2 to 20 increases the engine efficiency by as much as 3 times in the lower supersonic range, while resulting in a less than 10% increase for a flight Mach number exceeding 8.