• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.603-607
• /
• 1988

On this paper, the application of Eiganstructure assignment to flight control system design is presents. Both output feedback and constrained output feedback are considered. The computer implimentation of the algorithm is discussed including the utilization of real arithmetic for complex conjugate eigenvalue. And the example include a stability augementation system, an autopilot decoupled mode control.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.638-647
• /
• 1994

This paper describes the real time Hardware-In-the Loop Simulation(HILS) that is an efective tool for design, testing and performance evaluation of the guidanc eflight system. The real time HILS was performed by using a 3-axis flight motion simulator, real time computer, I/O system and flight control system hardware along with the assumed flight trajectory of the guidance flight system. Also, we proved the validity of the real time HILS is the guidance flight system by comparing its simulation results with the software simulation data and telemetry data.

• 로봇학회논문지
• /
• 제6권2호
• /
• pp.97-107
• /
• 2011

This paper describes efficient flight control algorithms for building a reconfigurable ad-hoc wireless sensor networks between nodes on the ground and airborne nodes mounted on autonomous vehicles to increase the operational range of an aerial robot or the communication connectivity. Two autonomous flight control algorithms based on adaptive gradient climbing approach are developed to steer the aerial vehicles to reach optimal locations for the maximum communication throughputs in the airborne sensor networks. The first autonomous vehicle control algorithm is presented for seeking the source of a scalar signal by directly using the extremum-seeking based forward surge control approach with no position information of the aerial vehicle. The second flight control algorithm is developed with the angular rate command by integrating an adaptive gradient climbing technique which uses an on-line gradient estimator to identify the derivative of a performance cost function. They incorporate the network performance into the feedback path to mitigate interference and noise. A communication propagation model is used to predict the link quality of the communication connectivity between distributed nodes. Simulation study is conducted to evaluate the effectiveness of the proposed reconfigurable airborne wireless networking control algorithms.

• 한국항공운항학회지
• /
• 제27권2호
• /
• pp.54-69
• /
• 2019

The primary objective of this paper is to introduce the application of Human-Machine Interface (HMI) and Augmented Reality (AR) technologies in flight operations. These include: self-check-in, baggage handling, airport security and surveillance, airport operations monitoring, In-Flight Entertainment and Connectivity (IFEC), cockpit design, and cabin crew support. This paper investigates the application status and development trends of HMI and AR technologies for airports and aircraft. These technologies can provide more efficient in-flight passenger service and experience by using AR devices. This paper also discusses the developments such as; the Integrated Control Application (ICA) for the IFEC interface, AR flight simulation training program using the fixed-based simulator, and the AR aircraft cabin interior concept test program. These applications present how HMI and AR techniques can be utilized in actual flight operations. The developed programs in this paper can be applied to their purpose within aircraft interiors and services to enhance efficiency, comfort, and experience.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.916-924
• /
• 2008

In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.472-477
• /
• 2023

본 논문에서는 쿼드콥터 드론이 동적인 외부 환경 아래서도 외란에서도 효과적으로 경로를 추종하고 비행 안전성을 유지할 수 있도록 모델 예측 제어(MPC) 기법을 제안한다. MATLAB/Simulink에서 수행된 시뮬레이션을 통해, 외란이 주어지는 비행 시나리오에서 PID와 MPC 두 제어기의 성능을 비교한다. 제안된 설계 방법으로 MPC 제어기가 압력 변화와 공기 밀도 변동과 같은 외란에 대하여 MPC와 PID 제어기의 성능을 비교했을 때에 쿼드콥터 드론의 입력받은 주행 경로와 실제 경로의 Mean Squared Error 수치가 외란을 주기 전에는 0.2의 성능 차이를 보였다. 그리고, 외란을 주었을 때에는 0.8을 차이를 보이며 MPC 제어기의 향상된 경로 추종 정확도를 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.590-593
• /
• 2005

Unmanned Helicopter has several abilities such as vertical Take off, hovering, low speed flight at low altitude. Such vehicles are becoming popular in actual applications such as search and rescue, aerial reconnaissance and surveillance. These vehicles also used under risky environments without threatening the life of a pilot. Since a small unmanned helicopter is very sensitive to environmental conditions, it is generally known that the flight control is very difficult problems. The nonlinear adaptive fuzzy controller design procedure and its applications for altitude control of unmanned helicopter were described in the paper. This research was concentrated on describing the design methodologies of altitude controller design for small unmanned helicopter acquiring autonomous take off and vertical movement. The design methodologies and performance of the altitude controller were simulated and verified with an adaptive fuzzy controller. Throughout simulation results, I showed that the proposed adaptive controllers have enhanced control performance such as robustness, effectiveness and safety, in the altitude control of the unmanned helicopter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.460-460
• /
• 2000

Until now various model matching systems have been proposed for linear system, but very little has been done for nonlinear system In this paper, a design method of discrete time flight control system using nonlinear model matching is proposed. This method is based on Hirschorn's algorithm and facilitates easy determination of the control law using the relationship, between the output and the input, which is obtained by the time shift of the output. Also as a result, this method is the extension of the linear model matching control system proposed by Wolovich, in which the control law is obtained by left-multiplying the output by the interactor matrix. At the end of paper, the proposed control system is applied to CCV flight control system of an aircraft and the feasibility of the proposed approach is shown by the numerical simulations.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.71-80
• /
• 2000

In Underwater Flight Vehicle depth control system, the followings must be required. Firstly, It need robust depth control performance which can get over parameter variation, modeling error and disturbance. Secondly, It need no oveshoot phenomenon to avoid colliding with ground surface and obstables. Thirdly, It need continuous control input to reduce the acoustic noise and propulsion energy consumption. Finally, It need effective interpolation method which can reduce the dependency of control parameters on speed. To solve these problems, we propose the Fuzzy-PID depth controller with the control parameter interpolators. Simulation results show the proposed control scheme has robust and accurate performance with continuous control input.

• 대한기계학회논문집A
• /
• 제40권4호
• /
• pp.343-352
• /
• 2016

멀티로터 비행체는 여러 개의 로터로 이루어진 무인 비행로봇으로서, 로터의 개수에 따라서 트라이로터, 쿼드로터, 헥사로터, 옥토로터 등으로 나누어 진다. 멀티로터는 수직이착륙 및 정지비행과 같은 높은 기동성으로 인하여 다른 무인 비행로봇에 비하여 험준한 산학지역 및 건물이 밀집되어 있는 도심과 같은 지역의 정찰 및 감시 등 여러 응용분야에 유용하게 활용될 수 있다. 하지만, 멀티로터는 불확실한 외부 환경 및 외란의 영향에 쉽게 노출될 수 있어 강건한 자세 및 비행제어 기법의 적용을 필요로 한다. 본 논문에서는 강인제어기법 중 하나인 슬라이딩 모드제어기를 설계 및 임베디드 알고리듬을 구현을 통하여 실시간 실내 비행실험을 위한 시스템을 구성하고, 실시간 위치제어 및 자세 안정화에 대한 실내 비행실험을 수행하였다. 특히, 불확실한 외부환경에 대한 강건한 비행특성을 검증하기 위하여 외란을 삽입하여 비행시험을 통해 성능을 검증하였다.