• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1093-1098
• /
• 2013

A single-crystal sapphire is used as a transparent bulletproof window material; however, few studies have investigated the dynamic behavior and fracture properties under high-speed impact. High-speed and high-resolution sequential images are required to study the interaction of the bullet with the brittle ceramic materials. In this study, a device is developed to capture the sequence of high-speed impact/penetration phenomena. This system consists of a speed measurement device, a microprocessor-based camera controller, and multiple CCD cameras. By using a linear array sensor, the speed-measuring device can measure a small (diameter: up to 1 2 mm) and fast (speed: up to Mach 3) bullet. Once a bullet is launched, it passes through the speed measurement device where its time and speed is recorded, and then, the camera controller computes the exact time of arrival to the target during flight. Then, it sends the trigger signal to the cameras and flashes with a specific delay to capture the impact images sequentially. It is almost impossible to capture high-speed images without the estimation of the time of arrival. We were able to capture high-speed images using the new system with precise accuracy.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.149-156
• /
• 2019

In the field of maintenance of power transmission lines, drones have been used for their patrol and inspection by KEPCO since 2017. This drone technology was originally developed by KEPCO Research Institute, and now workers from four regional offices of KEPCO have directly applied this technology to the drone patrol and inspection tasks. In the drone inspection system, a drone with an optical zooming camera and a thermal camera can fly automatically along the transmission lines by the ground control system developed by KEPCO Research Institute, but its camera gimbal has been remotely controlled by a field worker. Especially the drone patrol and inspection has been mainly applied for the transmission lines in the inaccessible areas such as regions with river-crossings, sea-crossings and mountains. There are often communication disruptions between the drone and its remote controller in such extreme fields of mountain areas with many barriers. This problem may cause the camera gimbal be out of control, even though the inspection drone flies along the flight path well. In addition, interference with the reception of real-time transmitted videos makes the field worker unable to operate it. To solve these problems, we have developed the auto-tracking camera gimbal system with deep learning method. The camera gimbal can track the transmission line automatically, even when the transmitted video on a remote controller is intermittently unavailable. To show the effectiveness of our camera gimbal system, its field test results will be presented in this paper.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.42-48
• /
• 2020

This research illustrates how the hybrid engine system comprising of a two-cycle reciprocal engine with an integrated generator and a battery is prepared for the design process. The purpose of this research is to increase flight endurance taking advantage of the high energy density of hybrid propulsion systems as well as to cope with current environmental issues by reducing fossil fuel. The hybrid system is designed to offer 6 kW power, and the power can be adjusted by controlling the engine's RPM in accordance with load variations. In addition, the battery is adopted to offer extra electric power that this hybrid system cannot cover, and can function as the main power source in limited time in the case of an emergency situation. Besides that, the generator is directly mounted on an engine crank-shaft, and in turn, they can share the same RPM. Thus, it is hypothesized that this integration method can make a compact design possible by reducing space for the installation in the fuselage of UAVs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.582-587
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments, because they are cheap, easy to use, and robust under varying lighting conditions. However, the recognition of objects using a ultrasonic sensor is not so easy due to its characteristics such as narrow beam width and no reflected signal from a inclined object. As one of the alternatives to resolve these problems, use of multiple sensors has been studied. A sequential driving system needs a long measurement time and does not take advantage of multiple sensors. Simultaneous and pulse coding driving system of ultrasonic sensor array cannot measure short distance as the length of the code becomes long. This problem can be resolved by multi-frequency driving of ultrasonic sensors, which allows multi-sensors to be fired simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a simultaneous and multi-frequency driving system for an ultrasonic sensor array for object recognition. The proposed system is designed and implemented using a DSP and FPGA. A micro-controller board is made using a DSP, Polaroid 6500 ranging modules are modified for firing the multi-frequency signals, and a 5-channel frequency modulated signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances for each sensor were obtained from filtering of the received overlapping signals and calculation of the time-of-flights.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.224-231
• /
• 2020

An optical tracking plays an important role for measurement operation, as it is responsible for low altitude measurements that are difficult to obtain with radar systems. Since the existing optical tracking systems have not been developed in the proving ground itself so far, it is difficult to modify them to fit the environment of the proving ground. Also, they are designed as a vehicle-mounted type, so there is a limitation in selecting an optimal site. The in-house developed small optical tracking system is designed with a simple configuration to overcome these shortcomings and makes it possible for operators to operate the system at any place in the proving ground. In addition, there has been a need of developing small optical trackers by ourselves to be prepared for future research so that artificial intelligence (AI) can be applied to the optical tracking systems. In this paper, we described the design concept of the small optical tracker, the configuration of the components to implement the basic tracking function, and showed the results of the simulation to set the configuration of the equipment according to the characteristics of the flight targets.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.1
• /
• pp.35-41
• /
• 2010

In developing modern aircraft, the reconfiguration control that can improve the safety and the survivability against the unexpected failure by partitioning control surfaces into several parts has been actively studied. This paper deals with the reconfiguration control using model predictive control method considering the saturation of control surfaces under the control surface failure. Linearized aircraft model at trim condition is used as the internal model of model predictive control. We propose the controller that performs optimization using LMI (linear matrix inequalities) based semi-definite programming in case that control surface saturation occurs, otherwise, uses analytic solution of the model predictive control. The performance of the proposed control method is evaluated by nonlinear simulation under the flight scenario of control surface failure.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.401-407
• /
• 2016

This paper introduces 3-dimensional path planning and guidance including power model for high altitude long endurance (HALE) UAV using solar energy. Dubins curve used in this paper has advantage of being directly available to apply path planning. However, most of the path planning problems using Dubins curve are defined in a two-dimensional plan. So, we used 3-dimensional Dubins path generation algorithm which was studied by Randal W. Beard. The aircraft model which used in this paper does not have an aileron. So we designed lateral controller by using a rudder. And then, we were conducted path tracking simulations by using a nonlinear path tracking algorithm. We generate examples according to altitude conditions. From the path tracking simulation results, we confirm that the path tracking is well on the flight path. Finally, we were modeling the power system of HALE UAVs and conducting path tracking simulation during 48hours. Modeling the amount of power generated by the solar cell through the calculation of the solar energy yield. And, we show the 48hours path tracking simulation results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.27-34
• /
• 2014

Buzz margin scheduling and control technique which are suitable to regulate stable and high pressure air in wide range of Mach number are suggested for fixed geometry of a supersonic intake. From the analysis of preceding study, most effective control variable is induced and scheduling law is newly suggested in a real application point of view. The appropriateness of the control law in wide range of Mach number is addressed by numerical simulation of controlled propulsion system. Also, the simulation for stabilization and tracking performances of the controller are studied to investigate the phenomena under flight maneuver and disturbances.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.5
• /
• pp.342-349
• /
• 2013

A damage imposed on an unmanned aerial vehicle changes the flight dynamic characteristics, and makes difficult for a conventional controller based on undamaged dynamics to stabilize the vehicle with damage. This paper presents a neural network based adaptive control method that guarantees stable control performance for an unmanned aerial vehicle even with damage on the main wing. Additionally, Pseudo Control Hedging (PCH) is combined to prevent control performance degradation by actuator characteristics. Asymmetric dynamic equations for an aircraft are chosen to describe motions of a vehicle with damage. Aerodynamic data from wind tunnel test for an undamaged model and a damaged model are used for numerical validation of the proposed control method. The numerical simulation has shown that the proposed control method has robust control performance in the presence of wing damage.