• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.329-340
• /
• 2019

An innovated type of the flat steel plate-lightweight aggregate concrete hollow composite slab was presented in this paper. This kind of the slab is composed of flat steel plate and the lightweight aggregate concrete slab, which were interfaced with a set of perfobond shear connectors (PBL shear connectors) with circular hollow structural sections (CHSS) and the shear stud connectors. Five specimens were tested under static monotonic loading. In the test, the influence of shear span/height ratios and arrangements of CHSS on bending capacity and flexural rigidity of the composite slabs were investigated. Based on the test results, the crack patterns, failure modes, the bending moment-curvature curves as well as the strains of the flat steel plate and the concrete were focused and analyzed. The test results showed that the flat steel plate was fully connected to the lightweight aggregate concrete slab and no obvious slippage was observed between the steel plate and the concrete, and the composite slabs performed well in terms of bending capacity, flexural rigidity and ductility. It was further shown that all of the specimens failed in bending failure mode regardless of the shear span/height ratios and the arrangement of CHSS. Moreover, the plane-section assumption was proved to be valid, and the calculated formulas for predicting the bending capacity and the flexural rigidity of the composite slabs were proposed on the basis of the experimental results.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.1-10
• /
• 2004

본 논문에서는 수직 및 수평 브레이싱을 생략하고 I-형 거더를 가로보만으로 연결한 강합성 2-거더교에서 가로보의 적정 배치간격 및 소요 휨강성의 산정을 위한 연구를 수행하였다. 이를 위해 지간 40m의 단순교와 40+50+40m의 2차로 연속교를 예제교량으로 시산 설계하였다. 본 교량에 대해 중간가로보의 배치 간격과 휨강성을 매개변수로 하여 합성전 후 고정하중, 활하중, 풍하중 및 지진하중에 대한 해석을 수행하고 설계하중조합에 대한 응력 및 활하중 분배효과를 분석하였다. 한편, 강재 거더와 가로보의 격자구조에 대해 합성전 고정하중을 고려한 재료-기하 비선형해석으로부터 횡비틀림 좌굴강도를 평가하였다. 이상의 해석 결과를 토대로 지점부 및 중간가로보의 적정 배치 간격과 소요 휨강성을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.799-813
• /
• 2012

Five two-span reinforced concrete (RC) slabs and seven two-span RC beams were tested under the ISO 834 standard fire with different durations. CFRP strengthening was then applied to some of the specimens after the damaged concrete was removed from the specimens and replaced with polymer mortar. All the specimens were loaded to failure to investigate the influence of fire-damage and the effectiveness of strengthening methods. Test results indicated that the flexural capacities of specimens decrease with the fire duration increases. Moreover, fire exposure had more significant effect on the flexural rigidity than on the bearing capacity of the specimens. After rehabilitation, the bearing capacities of specimens reached or even exceeded that of the reference RC specimen, and the strengthening methods seemed to have limited effect on flexural rigidity recovery. From the analysis of moment redistribution of tested beams, elevated temperature is found having different impacts on sagging moment region and hogging moment region. The damage of RC continuous member is definitely a comprehensive response of different regions.

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.71-78
• /
• 2000

This paper presents a study on the flexural rigidity of reinforced high strength concrete beams. Thirty six beams with different compressive strength of concrete, tensile reinforcement ratio, compressive reinforcement ratio, and pattern of loadings(1 point loading and 2 points loading) were tested to evaluate the effective moment of inertia. According to the experimental results, the eqation(1) proposed by ACI code for the effective moment of inertia overestimated that of simply supported reinforced high strength concrete beams. Thus, in this paper, an empirical equation(3) is proposed as a lower bound of 90% confidence limit to estimate the effective moment of inertia of simply supported reinforced high strength concrete beams.

• 한국의류학회지
• /
• 제10권2호
• /
• pp.29-35
• /
• 1986

The main purpose of the study was to investigate relationships between subjective evaluation of comfort/discomfort and tactile sensation. It was also attempted to analyse physical properties of fabric, hence to find physical factors which have effects on wearing- comfort. The results were as follows; 1. Polyester fabric B Type ranked the highest on subjective comfort scale of T-shirts. 2. Scratchiness and flexural rigidity among subjective factors were important on overall comfort sensations of the subjects. 3, In winter, subjective factors, suchas Soratchiness, Heaviness & Flexural Rigidity, were significantly correlated with objective factors of Scratchiness, Thickness & Weight, Stiffness, respectively. 4. In summer, subjective factors such as warmth, Heaviness, Clammy & Cling Tension, Flexural Rigidity, were significantly correlated with objective factors of Thermal Insulation, Thickness & Weight, Cling Tension and stiffness, respertively. 5. Scratchiness, Weight, Stiffness & Thermal Insulation among objective factors were important on overall comfort sensation of the subjects.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.342-347
• /
• 2004

Excavation nearby the existing structures is being performed vigorously to get the greatest use of land along with fast economic growth in the downtown area. The application of soil nailing system gradually increases because of an advantage of soil nailing system adjacently constructed in the existing structures. In this study, friction resistance by pull-out is considered as main resistance except resistance formed by flexural rigidity of nail observing that resistance of flexural rigidity is about $0{\sim}15\;%$ of whole safety factor according to degree of flexural rigidity in general soil nail wall and application of geosynthetic fiber soil nailing system is evaluated through laboratory tensile strength test and field pull-out test.

• 동력기계공학회지
• /
• 제2권1호
• /
• pp.52-58
• /
• 1998

An immune system has powerful abilities such as memory, recognition and learning to respond to invading antigens, and is applied to many engineering algorithm recently. In this paper, the combined optimization algorithm is proposed for multi-objective problem by introducing the capability of the immune system that controls the proliferation of clones to the genetic algorithm. The optimizing ability of the proposed algorithm is identified by using multi-peak function which have many local optimums and identification of the flexural rigidity for wire rope model.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1272-1277
• /
• 2009

Since improved capacity for RC bridges has been required due to deterioration or increase in traffic, the deflection of cracked reinforced concrete slabs need to be reconsidered. Strengthening is known as the better way to improve capacity of bridges than reconstructing. In this paper, Fiber Reinforced Plastic (FRP) was introduced as one of the best strengthening methods for civil structures. The structures strengthened with FRPs can improve the strengthening capacity and serviceability. Therefore, CFRP sheet and Glass Fiber-Steel Composite Plate (GSP) in this research were used for strengthening slabs of RC bridges. Experimental data from the strengthening will be helpful to better understand the effect of the strengthening and effective flexural rigidity.

• Steel and Composite Structures
• /
• 제3권2호
• /
• pp.123-140
• /
• 2003

The importance of the research on moment-resistant properties of unstiffened tubular joints and the research background are introduced. The performed experimental research on the bending rigidity and capacity of the joints is reported. The emphasis is put on the discussion of the flexural behavior of the joints including sets of geometrical parameters of the joints and several loading combinations. Procedures and results of loading tests on four full size joints in planar KK and X configuration are described in details at first. Mechanical models are proposed to analyze the joint specimens. Three-dimensional nonlinear FE models are established and verified with the experimental results. By comparing the experimental data with the results of the analysis, it is reported reasonable to carry out the structural analysis under the assumption that the joint is fully rigidly connected, and their bending capacities can assure the strength of the members connected under certain limitation. Furthermore, a parametric formula for inplane bengding rigidity of T and Y type tubular joints is proposed on the basis of FE calculation and regression analysis. Compared with test results, it is shown that the parametric formula developed in this paper has good applicability.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.145-154
• /
• 2009

강합성 절곡 바닥판 중에서 I형강으로 보강된 강합성 절곡 바닥판은 절곡바닥판내에 I형강을 매입시켜 기존의 현장타설 RC바닥판보다 경량화되고 시공성을 향상시킨 바닥판이다. 현재 일반적인 철근콘크리트 구조물의 유효휨강성에 대한 계산은 도로교설계기준 및 ACI에서 제안하고 있는 방법을 사용하고 있다. 본 연구에서는 도로교설계기준 및 ACI에서 제안된 유효휨강성에 대한 산정 방법을 Ι형강으로 보강된 강합성 절곡 바닥판에 적용하여 그에 대한 적용성을 평가하고 철근콘크리트 바닥판과 비교를 하였다. 또한 실험변수로써 스터드의 유무, 지간의 변화, 단면의 형태, 부재연결방법에 걸쳐 4가지 변수를 두고 총 15개의 실험체를 제작하여 실제의 휨강성과 ACI에서 제안된 식에 의해 계산된 유효휨강성을 비교, 분석하였다.