• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.745-752
• /
• 2007

In this study, the effects of flexible bodies in vehicle suspension components were investigated to enhance the accuracy of multibody dynamic simulation results. Front and rear suspension components were investigated. Subframes, a stabilizer bar, a tie rod, a front lower control arm, a front knuckle, and front struts were selected. Reverse engineering techniques were used to construct a virtual vehicle model. Hard points and inertia data of the components were measured with surface scanning equipment. The mechanical characteristics of bushings and dampers were obtained from experiments. Reaction forces calculated from the multibody dynamics simulations were compared with test results at the ball joint of the lower control arm in both time-history and range-pair counting plots. Simulation results showed that the flexibility of the strut component had considerable influence on the lateral reaction force. Among the suspension components, the flexibility of the sub-frame, steering knuckle and upper strut resulted in better correlations with test results while the other flexible bodies could be neglected.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.478-485
• /
• 2003

Today, although there have been high technical developments of a compressor in the respect of its capacity, it has been so hard to develop in the respect of vibration and noise because mechanical structure of it has originally numerous vibration and noise. However, if we can grasp the point of systematic phenomena of vibration and noise through the understanding of dynamic characteristics in mechanical equipment, it may be possible to consider countermeasures. In this study about a reciprocal compressor, the part of its machinery is modeled as rigid body, and the part of its spring is modeled as flexible body, and then they are analyzed by DADS. Each rigid body and spring are connected with joint torque of a motor is applied to shaft, and pressure is applied to a piston so that a compressor can be revolved. Based on this modeling, influence of a compressor's vibration is analyzed through changes of offset, connecting rod and crank radius In the case of weight balance, it I produced after re-design, and then changes of vibration of a compressor's inside are checked through experiments. These analysis data may help set measures of reducing vibration of a reciprocal compressor.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.18-25
• /
• 2020

This study investigated the structural behaviors and safety of an electro-mechanical linear actuator and a load simulator with a plate spring. The material and dimensions of the plate spring were determined by theoretically calculating the stress and torsional angle for the rating load of the actuator. Thereafter, a flexible multibody dynamics (FMBD) analysis was conducted on the linear actuator and load simulator to confirm the performance of the load simulator and acquire the reaction forces acting on the actuator and simulator. The structural safety of the linear actuator and load simulator was evaluated via finite element analysis using the aforementioned reaction forces. Consequently, the proposed linear actuator and load simulator were determined to be structurally safe; however, the safety factors for the actuation rod and the housing on the actuator were excessively high. Therefore, the weight and cost must be reduced to improve their design parameters in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3060-3065
• /
• 2009

A series of wholly aromatic Poly(ether-ether-ester)s with flexible side chain was synthesized by direct polycondensation from ether linkaged triad diol and 2,5-dialkoxyterephthalic acid. The chemical structures and physical properties of these polymers were investigated by using $^1H$-NMR, FT-IR, DSC and TGA. As results of investigations, the inherent viscosities($\eta$inh) measured at $40^{\circ}C$ in 1,1,2,2-tetrachloroethane(TCE) were 0.45~0.86 dl/g and initial decomposition(Td) in TGA occurred at 378~418 $^{\circ}C$ in N2 gas. The majority of these polymers were soluble in organic solvents used in this experiments at elevated temperatures. Melting temperatures(Tm) decreased with increasing the length of the side chain and showed odd-even effects.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1485-1490
• /
• 2008

Dumbbell-shaped aromatic amphiphilic molecules consisting of a dodeca-p-phenylene as a rigid segment and oligoether dendrons as a flexible chains were synthesized, characterized, and their aggregation behavior was investigated in the bulk and at the air-water interface. In contrast to the molecule 2 which shows a nematic liquid crystalline state, molecule 1 based on shorter dendritic chains was observed to self-assemble into a 3-D primitive orthorhombic supercrystal. And molecule 1 at the air-water interface was observed to reorganize from circular plates to ring structures by lateral compressions.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.249-249
• /
• 2006

We have prepared an amphiphilic wedge-coil molecule consisting of a hydrophobic wedge-like segment and a hydrophilic poly(ethylene oxide) (PEO) segment. The wedge-coil block molecule self-assembles into cylindrical nanofibers in both polar as well as nonpolar solvents. Remarkably, the resulting nanofibers, as solvent polarity change from water to n-hexane, change from highly flexible coil-like to stiff rod-like characteristics. This dynamic switching in the stiffness of the nanofibers in response to solvent polarity is attributed to the structural inversion of cylindrical core from bulky dendritic segments with amorphous nature to crystallizable linear PEO segments.

• Korean Journal of Ichthyology
• /
• v.17 no.1
• /
• pp.36-42
• /
• 2005

Histological observations on the barbels of catfish (Siluridae) in Korea are reported. The mandibular barbel of Far Eastern catfish, Silurus asotus, has epidermis and dermis surrounding an axial rod of cartilage. The stratified epidermis embodies mucous cells, club cells, and taste buds. The mucous cells, which are thin rims of basophilic cytoplasm, and the taste buds, which are basophilic, are located at the surface and the distal portion of the epidermis, respectively. The basement membrane lies between the epidermis and dermis except in places of dermal papillae. The dermis is made up of loose connective tissue fibers enclosing nerve bundles and blood vessels. The central region of cartilage is innermost and enclosed within muscle layers. The mandibular barbel of slender catfish, S. microdorsalis, has an identical structure to those of the Far Eastern catfish however, the percentage thickness of epidermis in the upper and lower parts of the barbel and the number of taste buds in the upper and middle parts of the barbel are different from those of Far Eastern catfish. This study shows that the mandibular barbels in Far Eastern catfish and slender catfish are of a stiff and flexible type.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.245-256
• /
• 2014

잉어, Cyprinus carpio와 동자개, Pseudobagrus fulvidraco의 상악 하악 수염을 조직학적으로 조사하였다. 동자개의 수염은 연골성 증축(axial rod of cartilage), 신경섬유다발(bundle of nerve fiber), 표피(epidermis), 평활근 층(smooth muscle layer) 및 미뢰(taste bud)로 구성되었으며, 잉어의 수염은 표피, 신경섬유다발, 혈관(blood vessel) 및 미뢰로 구성되었다. 수염 길이에서 잉어는 상악 바깥쪽 수염(second maxillary barbel)이 상악 안쪽 수염(first maxillary barbel) 보다 길게 나타났으며, 동자개는 하악 안쪽(inner mandibular barbel), 상악 위쪽(upper maxillary barbel), 하악 바깥쪽(outer mandibular barbel), 상악 아래쪽(lower maxillary barbel) 순으로 길게 나타났다(P<0.05). 미뢰의 수를 고려하였을 때, 동자개와 잉어간의 미각에 대한 유의적 차이가 없었다(P>0.05). 아울러, 두 어종의 모든 수염에서 수염 상부의 미뢰 수가 하부의 미뢰 수 보다 높게 나타났다(P<0.05). 본 연구 결과, 동자개의 수염은 딱딱하며 굴절성인 수염(flexible and stiff type)이었으며 잉어의 수염은 연하고 유연한 수염(tender and yielding type)으로 파악되었다.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.54-62
• /
• 1989

준희박과 농축용액에서 약간의 유연성을 갖는 강성막대형 고분자의 회전확산계수와 zero shear rate 점도를 예측하기 위해 한정된 강성 사슬모델이 제시되었다. 본 연구에서는 이제시된 모델을 분자량 분포를 갖는 다분산계로 확장시켰다. 분자들의 분자량 분포 (MW/Mn) 와 분포 함수를 알수 없기 때문에 해당분자에 가장 적당한 분자량 분포와 함수를 취하였다. 만약 이것들을 알고 있다면 제시된 모델로 회전확산계수와 zero shear rate 점도 등과 같은 인자들을예측할수 있었다. 단분산계의 경우와 같이 다분산계에서도 회전확산계수 의 평균분자 윤곽길이 의존도는 L-7 에 비례하는 것으로 나타났다. Doi와 Edwards 의 튜브 모델에 의한 L-9 과 다른 이유는 분자들의 거동을 관찰하기 위해 임의로 선정된 하나의 막 대형 고분자운동을 제약하는 정도가 심하지 않았으며 따라서 제약 완화시간도 훨씬 짧았기 때문이다. 더구나 점도와 회전 확산계수와 단분산계에서는 정성적으로 일치한데 제약 완화 시간도 훨씬 짧았기 때문이다. 더구나 점도와 회전적인 일치를 나타내었다. 이 모델로 기준 으로 하여 분자들의 길이와 종류에 관계없이 하나의 master curve를 그릴수 있었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.3
• /
• pp.158-163
• /
• 2005

This paper deals with the histology of the barbels of striped sea catfish, Plotosus lineatus (Thunberg). This fish have eight noticeable barbels of two pairs on their maxillary and mandibular. Each barbel is composed of an epidermis, dermis and a central rod of cartilage. The epidermis in the middle part of the maxillary barbel is thicker than those on other parts, and formed of stratified epithelium which contains many cutaneous taste buds and a few small club cells. Number of taste buds increase on the middle and posterior part of each barbel. The dermis consists of loose connective tissue fibers which encloses blood vessels and bundles of nerve fibers. The barbels of this fish can be categorized into stiff and flexible types and are accessory, feeding and sensory structures. Thus we substantiate that they are gustatory receptor organs for this fish.