• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.191-201
• /
• 1999

There have been a huge volume of researches concerning dispatching rules in job shop environments. Strangely, studies all but one pay no attention to multiple identical jobs due to the existence of production orders each of which calls for a fixed quantity, called an order size, of a specific part. Jobs arrive in the form of production orders in most, if not all, job shop type flexible manufacturing systems. This paper presents simple processing-time-based dispatching rules, and shows experimentally based on simulation that the rules with order-size considerations perform consistently well for tardiness and utilization measures. Several alternative strategies for rule specifications are examined.

• 산업공학
• /
• 제10권2호
• /
• pp.91-97
• /
• 1997

A mass production system was implemented to reduce a manufacturing cost in a way of copying with a strong world market competition. However customer's demands are changing so rapidly and the mass production system is no longer competitive to meet the demands. FMS(Flexible Manufacturing System) has been introduced as a replacement for the mass production system, but it still does not meet system's requirements. A new manufacturing system, called a holonic manufacturing system (HMS), is emerging. This paper is giving a first approach of a HMS for a multirobot cooperative process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.512-515
• /
• 1996

A mass production system was implemented to reduce a manufacturing cost in a way of copying with a strong world market competition. However customer's demands are changing so rapidly and the mass production system is nolonger competitive to meet the demands. FMS (Flexible Manufacturing System) has been introduced as a replacement for the mass production system, but it still does not meet system's requirements. A new manufacturing system, called a holonic manufacturing system(HMS), is emerging. In this paper it is introduced an autonomous cooperative system under the concept of HMS.

• 소성∙가공
• /
• 제22권7호
• /
• pp.401-406
• /
• 2013

The use of roll-formed products increases every year due to its advantages, such as high production rates, reduced tooling cost and improved quality. However, till now, it is limited to part profiles with constant cross section. In recent years, the flexible roll forming process, which allows variable cross sections of profiles by adaptive roll stands, was developed. In this study, an attempt to optimize profile design for the flexible roll forming process was performed. An equation that predicts the longitudinal strain for part geometries with variable cross-sections was proposed. The relationship between geometrical parameters and the longitudinal strain was analyzed and investigations on the optimal profile design were performed. Experiments were conducted with a lab-scale roll forming machine to validate the proposed equation. The results show that the profile design method proposed in this study is feasible and parts with variable cross sections can be successfully fabricated with the flexible roll forming process.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1993년도 춘계공동학술대회 발표논문 및 초록집; 계명대학교, 대구; 30 Apr.-1 May 1993
• /
• pp.23-23
• /
• 1993

• 한국컴퓨터정보학회논문지
• /
• 제17권9호
• /
• pp.149-156
• /
• 2012

본 논문에서는 전기습윤(Electrowetting) 디스플레이의 효율적인 생산을 위해 섬유형식의 전극들을 제안하고, 이러한 방법을 이용한 전기습윤 셀 구동형 플렉서블 디스플레이의 소스 드라이버 설계방법을 제안하였다. 전기습윤 셀 매트릭스는 임프린팅 방법에 의하여 PET 등의 Substrate 위에 구성하고 셀 매트릭스 사이의 간격에는 드라이버섬유, 습윤 전극섬유와 전도성 섬유를 가로와 세로로 배치하고, 교차점에는 전기적 접점을 구성하여 전기습윤 셀매트릭스가 구동되도록 하였다. 기존의 소스 드라이버에서는 각 채널당 R/2R방식의 DAC을 사용하므로 사용되는 소자의 수가 증가하여 집적도가 저하되는 단점이 있다. 따라서 본 논문에서는 채널당 소자의 수를 감소시켜 집적도를 높이고 비용을 절감할 수 있는 저 전력 소스 드라이버 설계방법을 제안하고 VHDL 프로그램을 이용한 시뮬레이션으로 타당성을 검증하였다.

• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.429-437
• /
• 1999

A mathematical model was established for estimating changes in pressure and volume of permeable kimchi packages. The model comprises the CO2 gas production from kimchi and permeation of O2, CO2 and N2 through the permeable film or sheet. Using the developed model, the effects of various packaging variables on the pressure and volume changes were analyzed for rigid and flexible packag es of kimchi(3% salt content) at 15oC, and then effect of storage temperature was also looked into. In case of rigid pack of 400g, using the plastic sheet of high CO2 permeability and initial vacuumizing can help to relieve the problem of pressure build up. The lower fill weight can further reduce the pressure, but will result in higher packaging cost. For the flexible package of 3 kg, highly permeable films such as low density polyethylene(LDPE) and polypropylene can reduce the volume expansion. Higher ratio of CO2 permeability to O2 and N2 permeabilities are effective in reducing the volume expansion. Increased surface area cannot contribute to reduction of volume expansion for highly permeable flexible packages of kimchi. For the impermeable packages, pressure and volume at over ripening stage (acidity 1.0%) increase with decreased temperature, while those at optimum ripening stage(acidity 0.6%) change little with temperature. Pressure of permeable rigid LDPE package increases with tem perature at any ripening stage, and temperature affects the volume of flexible LDPE package very slightly. Experimental verification of the present results and package design with economical consid eration are needed as a next step for practical application.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.235-245
• /
• 1998

This paper presents the fuzzy optimization model based scheduling methodology for the efficient production control of a FFS(FIexible Flow Shop) under the uncertain production environment. To develop the methodology, a fuzzy optimization technique is introduced in which the uncertain production capacity caused by the random events like the machine breakdowns or the absence of workers is modeled by fuzzy number. Since the problem is NP hard, the goal of this study is to obtain the near optimal but practical schedule in an efficient way. Thus, Lagrangian relaxation method is used to decompose the problem into a set of subproblems which are easier to solve than the original one. Also, to construct the feasible schedule, a heuristic algorithm was proposed. To evaluate the performance of the proposed method, computational experiments, based on the real factory data, are performed. Then, the results are compared with those of the other methods, the deterministic one and the existing one used in the factory, in the various performance indices. The comparison results demonstrate that the proposed method is more effective than the other methods.

• 기술혁신학회지
• /
• 제14권1호
• /
• pp.85-108
• /
• 2011

포드방식은 대량생산방식을 탄생하게 하였지만, 1980년대 들어 생산성 향상에서 한계에 직면하게 된다. 시장이 다변화되고 가계부문과 컴퓨터의 결합에 의한 자동제어기능이 발달함에 따라 대량생산방식은 새로운 변화의 계기를 맞게 된다. 자동차산업에서는 지동화에 기반을 둔 JIT, 신제품 모델개발, 모듈화를 전략적 개념으로 결합하여 점진적인 기술혁신이 진행된다. 이러한 기술혁신의 범주들은 유연생산기술의 특징을 형성하며 공정혁신을 주도하게 된다. 유연생산방식은 포드방식에서 기술적인 발전으로 인해 진보한 생산방식이다. 자동차산업의 이 같은 생산방식의 진보는 슘페터가 언급하였듯이 새로운 기술 패러다임이 등장하고, 이에 따른 기술적 불확실성이 점차 체계화하는 과정에서 이루어진 혁신이다. 기술혁신에 대해 공정혁신이 기여하는 바를 정량적 분석을 통해 검증함으로써 기술혁신이 점차 공정혁신을 통해 정착되는 과정을 분석할 수 있게 된다. 공정혁신의 이러한 기술혁신에 대한 기여의 분석은 자동차산업에서 미래에 예견되는 기술혁신에서 공정혁신이 갖는 성과와 방향을 예측하는데 도움이 될 것이다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.425-428
• /
• 2004

Flexible assembly line (FAL) is a production system that assembles various parts in unidirectional flow line with many constraints and manufacturing flexibilities. In this research we deal with a FAL balancing problem with the objective of minimizing the maximum workload allocated to the stations. However, almost all the existing researches do not appropriately consider various constraints due to the problem complexity. Therefore, this thesis addresses a balancing problem of FAL with many constraints and manufacturing flexibilities, unlike the previous researches. To solve this problem we use a genetic algorithm (GA). To apply GA to FAL, we suggest a genetic representation suitable for FAL balancing and devise evaluation method for individual's fitness and genetic operators specific to the problem, including efficient repair method for preserving solution feasibility. The experimental results are reported.