• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.283.1-283.1
• /
• 2016

Tin Oxide(SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. It would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. In addition, SnO2 is commonly used as gas sensors. To fabricate high quality epitaxial SnO2 thin films, a powder sputtering method was used, in contrast to typical sputtering technique with sintered target. Single crystalline sapphire(0001) substrates were used. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using X-ray diffraction, scanning electron microscopy, and atomic force microscopy measurements. We found that the strain evolution of the samples was highly affected by gas environment and growth rate, resulted in the delamination under O2 environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.148-154
• /
• 2009

In recent days, large-sized flat-panel display (FPD) has been increasingly applied to computer monitors and TVs. Mura defects, appearing as low contrast or non-uniform brightness region, sometimes occur in manufacturing of the Thin-Film Transistor Liquid-Crystal Displays (TFT-LCD). Implementation of automatic Mura inspection methods is necessary for TFT-LCD production. Various existing Mura detection methods based on regression diagnostics, surface fitting and data transformation have been presented with good performance. This paper proposes an efficient Mura detection method that is based on a regression diagnostics using studentized residuals for automatic Mura inspection of FPD. The input image is estimated by a linear model and then the studentized residuals are calculated for filtering Mura regions. After image dilation, the proposed threshold is determined for detecting the non-uniform brightness region in TFT-LCD by means of monitoring the every pixel in the image. The experimental results obtained from several test images are used to illustrate the effectiveness and efficiency of the proposed method for Mura detection.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1336-1339
• /
• 2007

Since organic thin film transistor (OTFT) provides simple and low cost processes, its application to the OTFT display has been studied. We developed an RC oscillator using organic thin film transistor and inverters with bootstrapping transistors. Device parameters were optimized by the simulation and OTFT RC oscillators were fabricated. The oscillator frequency and its dependence on resistance and bias voltage were studied. The organic TFT is adequate for low cost and simple process integrated circuits. The frequency of oscillation was simulated and measured. It is acceptable for low-cost microelectronic device and flat panel displays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.299-302
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of multicolor emission low operation voltage. In this study, several Eu complexes such as Eu(TPB)$_3$(Phen) and Eu(TPB)$_3$(Bpy) were synthesized and the photoluminescence(PL) and electroluminescence (EL) characteristics of their thin films were investigated by fabricating the devices having a structure of glass substrate/ITO/TPD/Europium-complexs/Alq$_3$/Al, where aromatic diamine(TPD) was used as an hole transporting and Alq$_3$ was used as an electron transporting materials. It was found that the photoluminescence(PL) and electroluminescence(EL) characteristics of these Europium complexes were dependent upon the ligands coordinated to Europium metal. Details on the explanation of electrical transport phenomena of the structure with I-V characteristics of the OLEDs using the trapped-charge-limited current(TCLC) model will be discussed.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.17-18
• /
• 2006

Flat Panel Displays (FPDs) have made a revolution in the display industry. TFT-LCD (Thin Film Transistor Liquid Crystal Display) has been the main player of FPD for last two decades. As the industry continuously develops the technology for better performance with lower cost is constantly demanded where several post LCD technologies are being developed. One of the prime candidates of post LCD technology is AMOLED (Active Matrix Organic Light Emitting Diode) that is considered to be an ideal FPD due to its extraordinary display performance and potentially low cost display structure. This technology has been accepted to small size display applications, such as cellular phone, PDA and PMP, etc. In this paper it is discussed that how this technology can be extended to large size display applications, such as TV. The technical issues and solutions of TFT backplane and color patterning of OLED materials are discussed and proposed

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1331-1334
• /
• 2008

In this paper, we developed a novel hyperreality display called the Head Dome Projector (HDP). The HDP is a head-mounted display consisting of a dome-shaped screen with a very small radius of 40 cm, a mobile projector with ultra-wide projection lens and LED light sources. The main feature of the HDP is very wide viewing angle of 160 degrees horizontally by 120 degrees vertically comparable to the human visual field of view without head tracking and 360 degrees by 360 degrees with head tracking. According to our subjective evaluation comparing the HDP with a flat-panel display (FPD), the HDP realizes hyperreality 2.5 points higher than that realized by an FPD in the case of ${\pm}5$ level evaluation for HD motion images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1163-1167
• /
• 2008

Since Samsung SDI and Sony started mass production of AM-OLED display for mobile/TV applications, OLED technology has emerged as leading candidate among the many technologies under development for next generation Flat panel displays. P-OLED (Polymer Organic Lighting Emitting Diode) technology, a class of OLED, is gathering momentum towards commercialization. P-OLED technology has made tremendous progress in terms of display performance (including life time, efficiency and color gamut) and in the maturity of ink jet printing process and equipment. In order to get into the mobile/TV application market successfully, P-OLED display technology must meet the following display makers' requirements: (1) P-OLED Display Performance in terms of lifetime, efficiency, and color coordinates, (2) Low Cost Manufacturing Technology such as "Solution Processable Printing Technology". P-OLED technology has already overcome many of the hurdles to mass manufacturing. In this paper, the latest developments in ink jet printing technology, including P-OLED material performance, is discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.671-674
• /
• 2006

Due to the stricter requests of the human perception of images, many industrial standards such as TCO'03 have been made to survey the Flat Panel Displays (FPD) nowadays. The angular-dependence luminance uniformity is an important item to evaluate the performance of FPD. In this article, we focus on the above test item base on TCO'03 standard in the case of vertical direction of ${\pm}15^{\circ}$. With controlling the driving voltage toward the liquid crystals of TN-type TFT-LCD, there exists a voltage-driving range which can achieve the value of the $L_{max}/L_{min}$ at ${\pm}15^{\circ}\;{\leq}1.7$ readily. Both experiment and simulation have been well analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.33-38
• /
• 2006

An evolutionary optimization process involving genetic algorithm and combinatorial chemistry was employed in an attempt to develop titanate-based red phosphors suitable for tri-color white light emitting diodes We screened a eight-cation oxide system including $(K,Li,Na)_x(Y,Gd,La,Eu)_yTi_zO_{\delta}$ in terms of luminescent efficiency. The combination of genetic algorithm and combinatorial chemistry was proven to enhance the searching efficiency when applied for phosphor screening. As a result, the composition was optimized to be $(Na_{0.92}Li_{0.08})(Y_{0.8}Gd_{0.2})TiO_4:Eu^{3+}$, The luminance of this phosphor was 110 % of that of well-known scheelite variant phosphor at an excitation of 400 nm.