• 패션비즈니스
• /
• 제20권4호
• /
• pp.15-35
• /
• 2016

The purpose of this study was to develop brassiere pattern designed to fit the breast shapes based on ESMOD pattern. It has three quarters cup round shape and also consists of three parts; upper cup, lower cup, and wings. Breast types are classified into five shapes; ideal breast, flat breast, upper developed breast, lower developed breast, and projecting breast. Two subjects for each breast type wore the brassiere, and they evaluated the appearance and wearing twice. Type I for research pattern designed to fit into the breast shape reflecting details of breast size were assessed as superior to the divided commercial type. However, wings' tightness of Type I for research pattern brassiere was high. Thus, to improve wearing satisfaction, extra was added to wing. Based on the results of wearing experiments of Type I for research, we adjusted and modified Type II for research pattern. Subsequently, its appearance and wearing were evaluated, in order to be improved. For upper developed breast pattern, we extended the length of lower part to balance upper and lower part, as the upper part was somewhat long. The lower developed breast has the closest feature to the ideal breast, suggestive that implies it does not require much improvement Projecting breast pattern has minimal space in the lower part, so we added the support to lift them to be similar to the ideal breasts. For all the breast shapes, we reduced the wings' tightness from 8% to 7% so that we could extend the length of the wings.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.275-304
• /
• 2019

Background: Air-purifying, tight-fitting facepieces are examples of respiratory protective equipment and are worn to protect workers from potentially harmful particulate and vapors. Research shows that the presence of facial hair on users' face significantly reduces the efficacy of these devices. This article sets out to establish if an acceptable seal could be achieved between facial hair and the facepiece. The team also created and investigated a low-cost "pressure testing" method for assessing the efficacy of a seal to be used during the early design process for a facepiece designed to overcome the facial hair issue. Methods: Nine new designs for face mask seals were prototyped as flat samples. A researcher developed a test rig, and a test protocol was used to evaluate the efficacy of the new seal designs against facial hair. Six of the seal designs were also tested using a version of the conventional fit test. The results were compared with those of the researcher-developed test to look for a correlation between the two test methods. Results: None of the seals performed any better against facial hair than a typical, commercially available facepiece. The pressure testing method devised by the researchers performed well but was not as robust as the fit factor testing. Conclusion: The results show that sealing against facial hair is extremely problematic unless an excessive force is applied to the facepiece's seal area pushing it against the face. The means of pressure testing devised by the researchers could be seen as a low-cost technique to be used at the early stages of a the design process, before fit testing is viable.

• 천문학회보
• /
• 제40권2호
• /
• pp.30.2-30.2
• /
• 2015

Abell 2744 is a giant merging cluster, called the Pandora's Cluster, at the redshift of z=0.308 (corresponding to a distance of 1270 Mpc). Taking the advantage of the deep high resolution images in the Hubble Frontier Field program, we study the properties of compact stellar systems including globular clusters and ultracompact dwarfs (UCDs) as well as dwarf galaxies in this cluster. We find a rich population of globular clusters and UCDs in Abell 2744. The spatial distribution of these objects is consistent with the mass map derived from lensing analysis, while showing a significant offset from the X-ray map of hot gas. The faint end of the luminosity function of the galaxies in the red sequence is fit by a flat slope, showing no faint upturn. We discuss these finding in relation with the origin of UCDs, formation of red sequence dwarf galaxies, and formation of the Pandora's cluster.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.18-18
• /
• 1993

According to the CCD photometric studies, the color distributions of globular clusters with collapsed cores, which are characterized by a power law cusp in thier surface brighness pronto, become bluer toward their centers, but this is not the case in the flat core clusters which are fit by the King model. To test the statistical implication of the color distribution within globular clusters, we built the sample dusters which follows the surface brightness pofile of the King model and power law cusp profile with the Sandage's standao luminosity function for M3 and the Salpter's initial mass functions. On the results from simulations based on the uniform random number generation the color gadients within globualr dusters mar be not likely to come from the statistical random distributions of stars but from the dynamical process on the cluster evolution.

• 대한설비공학회지:설비저널
• /
• 제12권1호
• /
• pp.2-11
• /
• 1983

The solar energy retention rate of a flat plate collector can be increased by increasing water flow rate through the collector which also increases the pumping energy incurred in obtaining that solar energy. The problem of optimal flow rate is formulated to fit within the framework of pontryagin's maximum principle and with a few simplifying assumptions, an optimal solution that can be easily implemented is obtaincd, The optimal solution is used in the simulation of a solar heating system using actual climatological data and the results are compared with that of on-off control. The result that not only the object function but, In some cases, also the solar energy retention rate the collector is increased. In is also found that the optimal control gets more advantageous as the solar insolation level gets lower, and also as tile cost of auxiliary heating fuel gets higher.

• 헤리티지:역사와 과학
• /
• 제54권2호
• /
• pp.38-55
• /
• 2021

태봉 철원도성은 현실적 접근의 어려움으로 인해 조사와 연구에 제약이 있다. 따라서 현재 고고학계에서 이용되고 있는 고지형분석 방법론의 적용과 해석을 통해 도성의 구조와 내부 공간 구획의 여러 모습을 파악하였다. 태봉 철원도성은 외성의 북쪽 구릉지성 지형에서 시작하여 남서방향으로 흘러 내려온 다섯 줄기의 평탄한 구릉지형을 이용하여 축조하였다. 내·외성벽은 각 구릉의 능선 줄기를 중심으로, 궁성벽은 그러한 능선 줄기의 중심 구릉지에 축조하였다. 각 성벽에는 여러 방향의 성문과 문지 등이 확인되는데, 도성 내부 건물의 방향과 지형 형태에 맞추어 설치한 것으로 파악된다. 도성 내 궁성은 평면 사다리꼴의 형태이며, 그 내부에는 궁전지와 관련 건물지 그리고 배수관련 지형 등이 확인된다. 궁전의 동서방향으로는 추정 도로와 함께 성문의 위치도 확인되었다. 궁성과 내성의 공간은 각각의 구릉 지형에 맞추어 평탄대지를 조성하고 건물지를 배치하였다. 내성의 남쪽에는 연못지로 추정되는 저수지가 궁성에서 내성의 중심을 잇는 수직 선상에 자리하는 모습이다. 내성과 외성 사이에는 건물지 흔적은 잘 관찰되지 않지만 평탄한 대지 지형의 존재로 그 가능성을 파악할 수 있다. 태봉 철원도성의 전체적인 구조는 북동 방향으로 약 9도 치우쳐 평면 장방형의 형태를 띠고 있다. 구릉성 지형의 형태를 따라 설계하였던 것으로 보이며, 남서벽의 꺽임 현상 또한 습지성 지형을 회피를 의도한 것으로 파악된다. 아직 도성 내부의 건물지 기능과 성격이 불명확하여 이를 바탕으로 한 공간 활용의 모습도 분명치 않다. 하지만 내성은 궁전과 함께 관아 건물지로서의 이용 공간으로서, 외성과 내성 사이 공간은 일반민의 생활 공간으로서 구분되었을 것으로 추정된다. 방리제로서의 구획 흔적도 구릉성 지형의 존재로 인해 그 가능성은 낮아 보이지만, 일부 지형은 평탄한 지대가 넓게 확인되고 있어 정연한 공간 구획의 모습을 배제할 수는 없다. 각 성벽의 축조 선후 시기나 방식 등도 아직 명확치 않지만, 적어도 지형을 이용한 도성의 축조와 내부 공간 구조의 활용을 이해할 수 있다.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.109-119
• /
• 2001

영광원전 주변 해역의 조간대에 서식하는 중형저서생물의 군집 조성은 여름 (6월)과 가을 (10월)의 두 시기, 각 조사 지선의 각 조사정점에서 모두 총 18개의 분류군이 출현하였다. 두 계절 모두 각 조사 지선에서 개체수나 서식 비율에 있어 선충류가 가장 높게 나타났지만 영광원전의 배출구 주변에 위치한 조사 지선 A, B의 경우는 일반적인 해역에서의 값보다는 현저하게 낮은 값을 보였다. 또한, 우점하는 분류군의 하나이며 환경의 변화에 민감한 저서성 요각류의 경우도 조사 지선 A, B의 경우 현저하게 낮게 나타났고, 그 다음 우점하는 분류군도 갯지렁이나 패충류 등이 차지하여 다른 일반 해역과의 상이점을 보였다. 조사 지선 C의 경우만 개체수나 출현 분류군에 있어서 일반적인 천해계의 값을 보였다. 수평 분포에 있어서도 조사 지선 A, B의 경우는 전반적으로 조간 대 상 중부 지역에서 서식밀도가 높게 나티났고, 원전의 배수구와 가장 멀리 떨어진 조사지선 C의 경우에서는 상부에서 하부로 갈수록 개체수가 증가하는 경향을 나타냈다. 크기별 개체수에 있어서는 체 크기 0.125 mm에 들어가는 크기의 생물들이 높게 나타났다. 두 계절에 있어서 중형저서동물이 퇴적물 내에서 수직 분포를 보면, 전반적으로 표층 0${\sim}$1cm에 가장 높은 서식밀도를 보이고 퇴적물내의 깊이가 깊어감에 따라 서서히 감소하는 경향을 보였다. 각 분류군에 있어서는 분류군별로 수직 분포의 차이를 나타냈다. 유사한 환경을 나타내는 다른 조간대 갯벌과의 비교에선 조사 지선 A, B의 경우는 극히 불안정한 서식 환경임을 보여주었다.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1150-1162
• /
• 2011

Considering the fact that the fit for men's clothes is important for the sizing system modern ready-made pants, an analysis of obese middle-aged men is required at this period of time to determine the appropriate fit for obese men. The following research focused on 635 middle-aged obese men who had a BMI index of at least 25 and a waist circumference from the belly-button level of 34 inches or more. This research deals with the articles of circumference, thickness and other major physical changes that happen during the 30s, 40s, and 50s. According to the analysis of these body measurement articles with specific regard to age, men's height and the height of their waist seemed to decrease as their age increased. This demonstrates that as these men grow older, the waist and stomach slowly curved into a circular and flat body type due to their obesity. In this study, the first factor figure was the height and leg length. The second factor figure was the waist form. The third factor figure was the center thigh circumference. The fourth and fifth factor figures were the hip length and shape. Lastly, the sixth factor figure was the calf circumference. These 6 factor figures construct 80.57% of the volume explanation and showed 3 patterns through a cluster analysis that showed different patterns of obesity forms for waist circumferences in key figure 1, waist and thigh circumferences in key figure 2, and waist and buttocks circumferences. Therefore, it was worthwhile to consider the circumferences of the waist, buttocks and thigh according to the body type category to enhance the drafting of well-fitting pants.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.107-113
• /
• 2020

PURPOSE. The aim of this study was to examine the importance of the defect-free scanning of a scan body by assessing the accuracy of virtual implant positioning in computer-aided design (CAD) software when the scan body image is improperly scanned. MATERIALS AND METHODS. A scan body was digitized in a dentiform model using an intraoral scanner, and scanned images with differing levels of image deficiency were generated: 5%, 10%, and 15% deficiency in the flat or rounded area. Using a best-fit image matching algorithm on each of the deficient scan body images, corresponding virtual implants were created. The accuracy of the implant position was evaluated by comparing the linear and angular discrepancies between the actual and virtual positions of the implant. Kruskal-Wallis tests and Mann-Whitney U tests with Bonferroni correction were used to determine the statistical differences among the seven scanned image deficiency groups (α=.05). RESULTS. In general, the linear and angular discrepancies of the implant position in the software increased as the deficiency of the scan body images increased. A 15% scan body image deficiency generated larger discrepancies than deficiency of 5% and 10%. The difference of scan defect position, flat or rounded area, did not affect the accuracy of virtual implant orientation at 5% and 10% deficiency level, but did affect the accuracy at 15% deficiency level. CONCLUSION. Deficiencies in the scanned images of a scan body can decrease the accuracy of the implant positioning in CAD software when the defect is large, thus leading to the incorrect fabrication of implant prostheses.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.725-733
• /
• 1998

The pressure fluctuation on the surface of a submerged body has been recognized as a dominant noise source. There have been many studies concerning the flow induced noise on a flat plate. However, the noise over an axisymmetric body has not been well reported. This paper addresses the way in which we have investigated the mechanism of noise generation due to an axisymmetric body. The associated experiments and signal processing methods are introduced. A 3-dimensional axisymmetric body whose length and diameter were 2 m and 10.4 cm, was prepared as a test specimen. The wall pressure on the surface of the body was measured in a large scale low noise wind tunnel at KIMM(Korea Institute of Machinery and Metals). To measure the wall pressure, we used two microphone arrays which were tangential and normal to the flow. Based on the measured signal, frequency-wavenumber spectrum which explains the structure of turbulence noise, was estimated. Tangential to the flow, there exists convective ridge at a relatively higher wavenumber region; this can cause spatial aliasing. To circumvent this problem, the cross spectrum was interpolated. The interpolation has been performed by unwrapping the phase and smoothing the cross spectrum. The phase unwrapping was done based on the Corcos model; the phase of cross spectrum decreases linearly with the distance between microphones. Aforementioned signal processings are possible by employing the experimental results that the estimated wavenumber spectrum quite resembles the Corcos model. We try to modify the Corcos model which is applicable to the flat plate, by altering the magnitude of cross spectrum to fit the experimental data more accurately. We proposed that this wavenumber spectrum model is suitable for the 3-dimensional axisymmetric body. Normal to the flow, there exists a little correlation between signals of different microphones. The circumferential wavenumber spectrum contains uniform power along the wavenumbers.