• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.817-822
• /
• 2000

A proper flashing light is expected to enhance microalgal biomass productivity and photosynthetic efficiency. The effect of flashing light on high-density Chlorella kessleri (UTEX 398) cultures was studied using light-emitting diodes. A frequency modulator was designed to flash LEDs, and the device successfully provided wide range of frequencies and various duty cycles of flashing. A relatively high frequencies of 10, 20 and 50 kHz were used in this study. These frequencies have very short flashing time ($2-50{\mu}s$), which corresponded to the time constant of the light reaction of photosynthesis. The specific oxygen production rates of photosynthesis under flashing light were compared with those under an equivalent continuous light in specially designed illumination cuvette. The specific oxygen production rates under flashing light were 5-25% higher than those under the continuous light. A range of cell concentration was discovered, where the benefit of flashing light was maximized. The photosynthetic efficiency was also higher under flashing light with frequencies of over 1 kHz, which was a clear indication of flashing light effect and the degree of mutual shading could by overcome by flashing lights, particularly at high-density algal cultures.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.3
• /
• pp.186-190
• /
• 2000

It has been reported that flashing light enhances microalgal biomass productivity and overall photosynthetic efficiency. The algal growth kinetics and oxygen production rates under flashing light with various flashing frequencies (5Hz-37 kHz) were compared with those under equivalent continuous light in photobioreactors. A positive flashing light effect was observed with flashing frequencies over 1kHz. The oxygen production rate under conditions of flashing light was slightly higher than that under continuius ligth. The cells under the hight, particularly at higher cell concentrations. When 37kHz flashing light was applied to an LED-based photobioreactor, the concentration was higher than that obtained under continuous light by about 20%. Flashing light may be a reasonable solution to overcome mutual shading, particularly in high-density algal cultures.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.709-718
• /
• 2021

In this paper, it can be seen that the number of abandoned dogs increases every year through the statistics on the occurrence of abandoned animals. With the goal of reducing the number of stray dogs, a smart pet dog shoulder strap is implemented based on a real-time location tracking system using the ESP32 module and GPS sensor. It is an ESP32 module with a built-in Bluetooth module. It is input to the MCU using various sensors, and finally outputs to a smart-phone application, and communicates through the built-in blue-tooth module. In addition, it uses Neopixels to compensate the weaknesses at night through LED light emission, and automatically sets the warning distance to design a music playback system through the LED flashing effect and MP3 module. In addition, a smart pet dog shoulder strap was designed to help pet dog health care by measuring the moving distance according to the amount of activity through the gyro sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.296-301
• /
• 2020

Three types of traffic signal systems are two-color signal systems that flash red and green and are mainly used on crosswalks, next, three-color equalization systems mainly used at T-shaped intersections with red and yellow lights and a green arrow, and third, four-color intersections that generally have red, yellow and green colored lights and a green arrow. In what is known as the "dilemma zone" area, a driver collects information that influences his/her decision whether to stop, speed, tail, interrupt, or violate a traffic light, depending on the intersection width, vehicle speed, cognitive response time and reference yellow signal time. This study examined the impact of changes in the length of the dilemma zone areas based on changes in yellow signal times, the speed of the intersection passages, and signal lamps. Downward adjustments of 50km/h and 60km/h affected yellow signal time. The yellow signal time increased by 0.1 to 2.3[s] due to this effect and the dilemma zone area increased by 1.22 to 26[m]. The driver of the dilemma zone could quickly decide to reduce the time remaining of the straight (3color, 4color) green signal to reduce the potential of a traffic accident at the intersection traffic. Safe entry of red (LED palm) and left-turn signals for entering flashed at the intersection and operated at midnight.