The Transactions of the Korea Information Processing Society
/
v.2
no.1
/
pp.66-74
/
1995
A 8-bit 15MHz CMOS subranging Analog-to-Digital converter for high-speed, low-power consumption applications is described. Subranging, 2 step flash, A/D converter used a new resistor string and a simple comparator architecture for the low power consumption and small chip area. Comparator exhibites 80dB loop gain, 50MHz conversion speed, 0.5mV offset and maximum error of voltage divider was 1mV. This Analog-to-Digital converter has been designed and fabricated in 1.2 m N-well CMOS technology. It consumed 150mW power at +5/-5V supply and delayed 65ns. The proposed Analog-to-Digital converter seems suitable for high- speed, low-power consumption, small area applications and one-chip mixed Analog- Digital system. Simulations are performed with PSPICE and a fabricated chip is tested.
Journal of the Korean Society of Hazard Mitigation
/
v.4
no.4
s.15
/
pp.13-19
/
2004
The tremendous flood damage caused by Typhoon Rusa(2002) was occurred at GangNeung City in GangWon Province. Almost of the city region was inundated and most of the stream channel facilities were damaged by flash flood with heavy rainfalls. We have investigated seriously damaged parts of stream bank and tried to analyze the causes of damages focused on flow characteristics in curved channel. We analyzed the damage aspects of curved channel by examining geomorphological survey and hydrographical characteristics. Strong correlation was shown according to the regression analysis between length of stream and meander wave length, and meander belt and length of stream. Furthermore, enveloped curve was presented between bottom slope of channel and meander belt, and meander ratio and channel width. As a result, special consideration about stream flow characteristics are needed for engineers who design stream banks and channels.
Journal of the Korean Society of Marine Environment & Safety
/
v.22
no.3
/
pp.268-277
/
2016
This paper aims at presenting bunkering educational programs for LNG fueled ship taking into consideration existing similar education programs and safety systems at the international level in order to enhance both seafarers' and vessels' safety. Heavy fuel oil has typically been used as fuel of ship propulsion. The competitiveness of the fuel oil is recently getting weak in terms of cost and environmental aspects. Liquefied natural gas is introduced for ship propulsion in the maritime field as a new energy source replacing heavy fuel oil. In order to prepare for installation and operation of LNG fueled propulsion ship on board, International Maritime Organization has discussed this subject for about 10 years. As a result of the discussion on such ships in IMO, the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels entered into force on the year 2015. International organizations and several countries therefore drives actively entire researches and other businesses with a view to providing equipment and system of LNG bunkering. The systems are divided into ship-to-ship transfer, terminal / pipeline-to-ship transfer and truck-to-ship transfer. By adopting transfer system of LNG bunkering, many human resources will be needed in these areas on scene as well as on managing, operating, trading, finance, design of LNG bunkering industries. LNG bunkering is just in the beginning stage. Hence, this paper reviews and proposes professional educational programs of LNG bunkering in consideration of technical aspects of the safety system of LNG bunkering based on the types of bunkering systems.
Purpose: This study was conducted to develop case-based self-learning multimedia contents for preventing malpractice that frequently occurred among nurses working in the operating room. Methods: Based on the learning needs of operating room nurses, real case reports, and literature reviews, the case-based multimedia learning contents were developed according to the instructional design procedure. The assessment of learning needs was performed by the combination of surveys using structured questionnaire and of interviews for 40 operating room nurses. Results: The learning contents included four learning modules with real malpractice cases from the areas of operating preparation, nursing skills during operation, environmental management of operating room, and patient safety and observation-related. The 80 minute long case-based multimedia learning contents were finally developed after content validity tests from clinical experts. Each module contained photos, sounds and flash animation with voice recording on the contents of nursing error cases and standardized protocols. Conclusion: The developed multimedia learning contents based on real error cases in this study can be utilized as an educational hands-on training materials for nurses to prevent malpractice in the operating room.
NVMe(Non-Volatile Memory Express) SSD(Solid State Drive) is a high-performance storage that makes use of flash memory as a storage cell, PCIe as an interface and NVMe as a protocol on the interface. It supports multiple I/O queues which makes it feasible to process parallel-I/Os on multi-core environments and to provide higher bandwidth than SATA SSDs. Hence, NVMe SSD is considered as a next generation-storage for data-center and cloud computing system. However, in the virtualization system, the performance of NVMe SSD is not fully utilized due to the bottleneck of the software I/O stack. Especially, when it uses I/O stack of the hypervisor or the host operating system like Xen and KVM, I/O performance degrades seriously due to doubled-I/O stack between host and virtual machine. In this paper, we propose a new I/O engine, called Direct-AIO (Direct-Asynchronous I/O) engine, that can access NVMe SSD directly for I/O performance improvements on QEMU emulator. We develop our proposed I/O engine and analyze I/O performance differences between the existed I/O engine and Direct-AIO engine.
Journal of the Korea Institute of Information and Communication Engineering
/
v.20
no.3
/
pp.577-582
/
2016
The synchronous TDC(Time-to-Digital Converter) of counter-type using current-conveyor is designed by $0.18{\mu}m$ CMOS process and the supply voltage is 3 volts. In order to compensate the disadvantage of a asynchronous TDC the clock is generated when the start signal is applied and the clock is synchronized with the start signal. In the asynchronous TDC the error range of digital output is from $-T_{CK}$ to $T_{CK}$. But the error range of digital output is from 0 to $T_{CK}$ in the synchronous TDC. The error range of output is reduced by the synchronization between the start signal and the clock when the timing-interval signal is converted to digital value. Also the structure of the synchronous TDC is simple because there is no the high frequency external clock. The operation of designed TDC is confirmed by the HSPICE simulation.
Journal of the Korean Society for Precision Engineering
/
v.22
no.11
s.176
/
pp.45-50
/
2005
In this study, the casting/forging process was applied in manufacturing a low control arm, in order to prove that application of casting/forging process to Al6061 is likely to get the effect of light weight compared with existing steel products and to reduce the cost of materials. Firstly, In order to set up the optimum casting condition of the forging material, Al6061, casting experiments were carried out by controlling pouring temperature of the aluminum for casting, mold temperature, and pouring time. $700^{\circ}C$ pouring temperature, $300^{\circ}C$ mold temperature and 10-second pouring time were taken into account as the optimum casting conditions. With respect to a hot forging test, it is practiced on the basis of a temperature of materials, strain rate, and reduction rate so as to observe each microstructure and examine strain-stress curve simultaneously; examine tensile test and hardness test; eventually set up the optimum hot forging condition. A hot forging test, tensile test, hardness experiment, and microstructure observation were carried out on condition of $70\%$ reduction rate, $500^{\circ}C$ temperature of materials, and 1 strain rate. As a result of those experiments, 330MPa tensile strength, $16.4\%$ elongation, and 122.8Hv hardness were recorded. In oder to get a sound preform which has no unfitting cavity and less flash, two preforms were proposed on the basis of volume rate of the final product; the optimum volume rate of preform for the low control arm was $115\%$. In conclusion, it is confirmed that using the forging material rather than casting materials in casting/forging process is likely to get more superior mechanical properties. Compared with Al6061, performed by means of general forging, moreover, cast/forged Al6061 can not only stimulate productivity by reducing production processes, but cut down the cost of materials by reusing forging scraps.
Both domestic and overseas urban drainage systems have been actively researched to solve the problems of urban flash floods and the flood damage that is caused by local downpours. Recent urban planning has been designed to better manage the floods of decentralized rainfall-management systems, and the installation of green infrastructure and low-impact development (LID) facilities at national ministries has been recommended. In this study, we use the EPA SWMM model to construct a decentralized rainfall-management network for each small watershed, and we analyze the effect of the drainage-capacity improvement from the installation of the LID technologies in vulnerable areas that replaces the network-expansion process. In the design of the existing urban piping systems, it is common to increase the pipe size due to the increment of the impervious area, the steep terrain, and the sensitive entrance-ramp junction; however, the installation of green infrastructure and LID facilities will be sufficient for the construction of a safe urban drainage system. The applications of LID facilities and green infrastructure in urban areas can positively affect the recovery of the corresponding water cycles to a healthy standard, and it is expected that further research will occur in the future.
Journal of the Korea Society of Computer and Information
/
v.17
no.9
/
pp.103-112
/
2012
Recently, the infrastructure to be connected to the internet is much provided, there is more and more need to connect electric or electronic products to the internet to monitor or control them remotely. However, most of the existing products lack the network interface, so it was very inconvenient to be connected to the internet. Therefore, this article designs and realizes the internet outlet allowing real-time scheduling that can control the power remotely on the internet by using the hardware TCP/IP processor. The realized product consumes low production cost because it can be realized by using the hardware TCP/IP processor and the 8-bit small microprocessor. In addition, the product can be used widely in both wired and wireless environments with a variety of user interface, including the dedicated control program which provides the environment configuration functions; embedded web service that enables the webpage to be saved on the external flash memory; Android smartphone application; motion recognition control environment that uses the OpenCV computer vision library, etc.
Yoon, Hye-Jin;Ku, Min-Je;Ahn, Hyung Jun;Lee, Byung Il;Mikami, Bunzo;Suh, Se Won
Molecules and Cells
/
v.19
no.3
/
pp.398-401
/
2005
The bacterial enzyme UDP-N-acetylglucosamine enolpyruvyl transferase catalyzes the first committed step of peptidoglycan biosynthesis, i.e., transfer of enolpyruvate from phosphoenolpyruvate to UDP-N-acetyl-glucosamine. We have overexpressed the enzyme from Haemophilus influenzae in Escherichia coli and crystallized it in the apo-form, as well as in a complex with UDP-N-acetylglucosamine and fosfomycin using ammonium sulfate as the precipitant. X-ray diffraction data from a crystal of the apo-form were collected to $2.8{\AA}$ resolution at 293 K. The crystal quality was improved by co-crystallization with UDP-N-acetylglucosamine and fosfomycin. X-ray data to $2.2{\AA}$ have been collected at 100 K from a flash-frozen crystal of the complex. The complex crystals belong to the orthorhombic space group I222 (or $I2_12_12_1$) with unit-cell parameters of a = 63.7, b = 124.5, and $c=126.3{\AA}$. Assuming a monomer of the recombinant enzyme in the crystallographic asymmetric unit, the calculated Matthews parameter ($V_M$) is $2.71{\AA}^3Da^{-1}$ and solvent content is 54.6%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.