• Title/Summary/Keyword: Flap valve

Search Result 27, Processing Time 0.022 seconds

The fabrication of a micro pump with a flap valve and a phase change actuator (알루미늄 플랩 밸브와 상변화 구동 마이크로 펌프의 제작)

  • Lee, Sang-Woo;Sim, Woo-Young;Yang, Sang-Sik
    • Proceedings of the KIEE Conference
    • /
    • 1998.11c
    • /
    • pp.1023-1025
    • /
    • 1998
  • This paper presents the fabrication of a micro pump consisting of a pair of Al f1ap wave and a phase change actuator. The phase change actuator is composed of a heater, a silicone rubber diaphragm and a working liquid chamber. The diaphragm is actuated by the evaporation and the condensation of the working liquid. The actuator pumps fluid through the valves. The micro pump is fabricated by the anisotropic etch, the boron deposition and the metal evaporation. The forward and the backward flow characteristics of the f1ap valves were obtained. Also, the flow rate of the micro pump has been measured. When the square wave input of 12 V, 60% duty ratio and 0.2 Hz is applied, the average flow rate is $0.15{\mu}{\ell}/sec$ for zero pressure difference.

  • PDF

KMRR의 열수력학적 설계를 위한 실증실험

  • 임인철;김헌일;이보욱;이지복
    • Nuclear Engineering and Technology
    • /
    • v.25 no.2
    • /
    • pp.343-352
    • /
    • 1993
  • 다목적연구로(KMRR)는 일반 발전용 원자로와는 매우 다른 특성을 가지고 있으며, 설계 개념 또한 특이하다. 위와 같은 특이한 설계 특성을 파악하기 위하여 열수력 실험을 수행하였으며 시운전 시험도 설계 개념의 입증에 중점을 두고 수행될 예정이다. 실증실험은 크게 설계 자료 생산을 위한 실험, 기기 설계 검증 시험, 시운전 성능 시험으로 나눌 수 있다. 설계 자료 생산을 위한 실험으로 핵연료의 열수력학적 특성을 규명하는 실험, 우회 유동에 의한 노심 출구 냉각수 상승 억제를 입증 또는 해석하기 위한 자료 생산용 실험 등이 이루어졌다. 기기 설계 검증 시험으로는 Pump 특성 시험, Flap valve 특성 시험 등을 들 수 있다. 또한, 시운전 성능 시험으로는 설계 개념을 입증하기 위한 여러 시험들이 행해질 예정이다. 이러한 실험들을 통하여 설계에 필요한 많은 자료들이 생산되었고, 시운전 시험을 통하여 설계를 검증하고 실제 운전에 필요한 많은 자료를 얻을 수 있으리라 기대된다. 본 기고를 통하여 이러한 실험의 중요성 및 내용에 대해 간략하게 기술하고자 한다.

  • PDF

항공기용 유압 스푸울 밸브의 윤활해석

  • 박태조;김래성;김치붕
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.218-223
    • /
    • 1997
  • 유압장치의 핵심부품인 유압 제어밸브(hydraulic control valve)는 유압펌프 등에 의하여 가압된 유압유의 압력과 유량을 제어하고 유동방향을 변화시키는 주요기능을 수행한다. 특히, 대부분의 제어밸브는 스푸울(spool)과 슬리브(sleeve)를 기본구조로 채용하고 있다. 피스톤 형상인 스푸울이 슬리브내를 왕복운동하면 스푸울과 슬리브 사이의 간극(clearance)에서는 점성유체인 유압유의 윤활작용에 의하여 원주방향으로 비대칭인 유체압력이 발생한다. 이 결과로 스푸울에 측력(lateral force)이 작용하며, 조건에 따라서는 스푸울에 작용하며, 조건에 따라서는 스푸울에 작용하는 마찰력이 증대할 뿐만 아니라 스푸울과 슬리브의 내벽에 과도한 마멸(wear)을 유방시키기도 하여 제어밸브의 성능을 크게 저하시키기도 한다. 유압공학분야서는 이를 유체고착(hydraulic locking) 현상이라고 부른다. 본 논문에서는 항공기 Flap actuator의 Selector manifold에서 사용되는 스푸울 밸브의 성능에 큰 영향을 미칠 것으로 예상되는 스프울과 슬리브 사이 간극에서의 윤활특성을 이론적으로 조사하고자 한다.

  • PDF

Optimization of Diesel Engine Performance with Dual Loop EGR considering Boost Pressure, Back Pressure, Start of Injection and Injection Mass (과급압력, 배압, 분사 시기 및 분사량에 따른 복합 방식 배기 재순환 시스템 적용 디젤 엔진의 최적화에 대한 연구)

  • Park, Jung-Soo;Lee, Kyo-Seung;Song, Soon-Ho;Chun, Kwang-Min
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.18 no.5
    • /
    • pp.136-144
    • /
    • 2010
  • Exhaust gas recirculation (EGR) is an emission control technology allowing significant NOx emission reduction from light-and heavy duty diesel engines. The future EGR type, dual loop EGR, combining features of high pressure loop EGR and low pressure loop EGR, was developed and optimized by using a commercial engine simulation program, GT-POWER. Some variables were selected to control dual loop EGR system such as VGT (Variable Geometry Turbocharger)performance, especially turbo speed, flap valve opening diameter at the exhaust tail pipe, and EGR valve opening diameter. Applying the dual loop EGR system in the light-duty diesel engine might cause some problems, such as decrease of engine performance and increase of brake specific fuel consumption (BSFC). So proper EGR rate (or mass flow) control would be needed because there are trade-offs of two types of the EGR (HPL and LPL) features. In this study, a diesel engine under dual loop EGR system was optimized by using design of experiment (DoE). Some dominant variables were determined which had effects on torque, BSFC, NOx, and EGR rate. As a result, optimization was performed to compensate the torque and BSFC by controlling start of injection (SOI), injection mass and EGR valves, etc.

The Clinical Outcomes of Damus-Kaye-Stansel Procedure According to Surgical Technique

  • Yang, Chan Kyu;Jang, Woo Sung;Choi, Eun-Suk;Cho, Sungkyu;Choi, Kwangho;Nam, Jinhae;Kim, Woong-Han
    • Journal of Chest Surgery
    • /
    • v.47 no.4
    • /
    • pp.344-349
    • /
    • 2014
  • Background: The Damus-Kaye-Stansel (DKS) procedure is a method for mitigating the risk of systemic ventricular outflow tract obstruction (SVOTO). However, there have been few reports on which surgical technique shows a better outcome. The objective of this study was to compare the outcome of the DKS procedure according to the surgical technique used. Methods: We retrospectively reviewed 12 consecutive patients who underwent the DKS procedure from March 2004 to April 2013. When the relationship of the great arteries was anterior-posterior, the double-barrel technique (group A) was performed. If the relationship was side-by-side, the ascending aortic flap technique (group B) was performed. Results: There was no early mortality and 1 late mortality in group B. There was no statistically significant difference in the median peak pressure gradient of preoperative subaortic stenosis in both groups: 14 mmHg (range, 4 to 53 mmHg) in group A and 15 mmHg (range, 0 to 30 mmHg) in group B (p=0.526). Further, a significant postoperative pressure gradient was not observed in either group A or group B. More than moderate postoperative neoaortic regurgitation was observed in 1 patient of group B; this patient underwent neoaortic valve replacement 66 months after the DKS procedure. No one had a recurrent SVOTO during follow-up. Conclusion: The DKS procedure is an effective way to minimize the risk of SVOTO, and there is little difference in the outcomes of the DKS procedure according to the surgical technique used.

Usefulness of using Tissue Expander in Pediatric Patient (소아 환자에서 조직확장기 사용의 유용성)

  • Lee, Jun-Woo;Park, Chul-Gyoo;Park, Jong-Lim;Kim, Yong-Kyu
    • Archives of Plastic Surgery
    • /
    • v.37 no.6
    • /
    • pp.763-768
    • /
    • 2010
  • Purpose: Reconstruction of soft tissue defect using tissue expander can provide better flap which is more similar to surrounding tissue in color, skin texture and hair compared to other methods. Many pediatric patients need reconstruction of soft tissue defect because of giant congenital nevi, congenital or acquired malformations and burn scars. Reconstruction using tissue expander is adequate to minimize dysmorphism in these patients. We intended to assess outcomes of using tissue expander in pediatric patients by retrospective study. Methods: Total cases were 168 of pediatric patients who received soft tissue reconstruction using tissue expander by the same surgeon from February, 1982 to May, 2009. All patients who received soft tissue reconstruction were under 10 years old. Mean age was 4.3 years old, the youngest 13 months, the oldest 8 years. Eightynine cases were male and 79 cases were female. Most common cause was giant hairy nevi (67 cases, 39.9%), secondary cause was burn scar/scar contracture (61 cases, 36.3%). Trunk (38 cases, 22.6%) was most common anatomical location. Results: Soft tissue defects were successfully covered using tissue expander in 149 cases (88.7%) without major complications. There was infection on 8 cases (4.7%) and we treated by adequate antibiotics in these cases. There were tissue expander folding or valve displacement on 5 cases (3%). Conclusion: Usage of tissue expander is useful on pediatric patients because tissue expansion is rapid on children and there are less secondary contractures on operation site than full thickness skin graft. Because of psychological stress due to tissue expander, operation should be performed before school age.

Surgical Treatment of Anomalous Origin of Coronary Artery from the Pulmonary Artery: Postoperative Changes of Ventricular Dimensions and Mitral Regurgitation (관상동맥-폐동맥 이상기시증(Anomalous Origin of Coronary Artery from Pulmonary Artery)의 수술적 치료: 중기 성적과 좌심실 및 승모판 기능의 변화 양상에 대한 연구)

  • Kang, Chang-Hyun;Kim, Woong-Han;Seo, Hong-Joo;Kim, Jae-Hyun;Lee, Cheul;Chang, Yoon-Hee;Hwang, Seong-Wook;Back, Man-Jong;Oh, Sam-Se;Na, Chan-Young;Han, Jae-Jin;Lee, Young-Tak;Kim, Chong-Whan
    • Journal of Chest Surgery
    • /
    • v.37 no.1
    • /
    • pp.19-26
    • /
    • 2004
  • Background: The aims of this study are to verify the result of the surgical treatment of ALCAPA and to identify the postoperative changes of left ventricular dimensions and mitral regurgitation (MR), Material and Method: Fifteen patients operated on since 1985 were included in the study. The patients operated on before 1998 (n=9) showed heterogeneous properties with various surgical strategies and cardiopulmonary bypass techniques. However, six patients were operated on with the established surgical strategy since 1998; 1) Dual perfusion and dual cardioplegic solution delivery through ascending aorta and main pulmonary artery, 2) Coronary transfer by rolled-conduit made of pulmonary artery wall flap, and 3) Additional mitral valvular procedure was not peformed. Result: Median age of the study group was 6 months (1 month to 34 years). The operative methods were left subclavian artery to left coronary artery anastomosis in 1, simple ligation in 2, Takeuchi operation in 2, and coronary reimplantation in 10 patients. The mean follow up period was 5.5<5.8 years (2 months 14 years), There were one early death (6.7%) and one late death. Overall 5-year survival rate was 85.6$\pm$9.6%. The Z-value of left ventricular end-diastolic and end-systolic dimensions were 6.4$\pm$3.0 and 5.1 $\pm$3.6 preoperatively, and decreased to 1.7$\pm$ 1.9 and 0.8$\pm$ 1.6 in 3 months (p<0.05). Significant preoperative MR was identified in 6 patients (40%) and all the patients showed immediate improvement of MR within f month postoperatively. There were 3 cases of reoperation due to coronary anastomosis site stenosis and recurrence of MR. However, there was no mortality nor late reoperation in the patients operated on after 1998. Conclusion: The surgical treatment of ALCAPA showed favorable survival and early recovery of ventricular dimensions and mitral valvular function. Although long-term reintervention was required in some cases of earlier period, all the cases after 1998 showed excellent surgical outcome without long-term problem.