• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.1-7
• /
• 2005

The prediction for tool life is one of the most important factors for increasing reliability, stability, and productivity of manufacturing system. This paper deals with a tool life prediction method in view of reliability assessment for cutting tools. In this study, flank wear was focused among multi-factors deciding the tool wear state. First, tool life was predicted by correlation between flank wear and cutting time, based on the extended Taylor tool life equation of turning, including parameters of cutting speed, feed rate, and cutting depth. Second, each of cutting conditions of end-milling was equivalently converted to apply ball end-mill data to the extended Taylor equation. The web-based prediction program for tool life was developed as one of reliability assessment programs for machine tools.

• Journal of Veterinary Clinics
• /
• v.31 no.4
• /
• pp.341-343
• /
• 2014

A 6-year-old female, shih-tzu was presented in the February with bilateral, symmetrical hair loss and hyperpigmentation on caudal dorsolumbar region. Skin test and blood examination found no remarkable finding. Histopathological examination of biopsies from the alopecic lesions revealed follicular atrophy, infundibular hyperkeratosis and some follicles were twisted truncated and dilated. The diagnosis of recurrent flank alopecia was based on clinical signs and supportive histopathology. Treatment with oral melatonin was started at 3 mg twice daily for 80 days, and by this time complete hair regrowth was observed. The following year in the September, a small non-inflammatory alopecia developed in the same site. The dog was given oral melatonin at 3 mg twice daily for 4 weeks, hair had completely regrown.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.4
• /
• pp.30-42
• /
• 1986

On the analysis of cutting mechanics in orthogonal cutting, each cutting force component can be predicted. By adding the flank face wear term to the prediction equation for cutting force components, complete equations are obtained. Using these equations, it is shown that cutting force components are increased linearly as flank face wear land is developed, in theory and experiment. By making non-dimensional term ie. Fv/Fc, the width of variation of output signal Fv/Fc is greately decreased compared with each cutting force component as cutting condition is varied. Among these conditions, the variation of chip width in the range of more than 1mm and that of cutting velocity have little effect on the output signal Fv/Fc, that of Flank face werr land can be detected without difficulty.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.63-73
• /
• 1995

A mechanistic force system model considering the flank wear for the face milling process has been developed. The model predicts variation of the cutting forces according to flank wear in face milling over a range of cutting conditions, cutter geometries and cutting process geometries including relative positions of cutter to workpiece and rounouts. Flycutting and multitoth cutting teste were conducted on SS41 mild steel with sintered carbide tool. In order to verify the mechanistic force model considering the flank wear of cutting tools, a series of experiments was performed with single and multitooth cutters in various cutting conditions. The results show good agreement between the predicted and measured cutting force profiles and magnitudes in time and frequency domains.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.30-34
• /
• 1998

In-process monitoring of cutting conditions and tool wear is important for improving productivity. This paper is concerned with on-line monitoring of tool wear and cutting force in end milling operation. The experimental study deals with the relations between flank wear and cutting force signal. Tool wear is detected by monitoring of cutting signal. A monitoring procedure is shown in this paper. The influence of flank wear on cutting signal activity was examined. The results are presented in the form of graphs. The analysis of the cutting signal and flank wear curves provides useful indicators of unacceptable wear development in the tool.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.225-234
• /
• 1993

A total of 333 carcasses were evaluated for hindquarter traits: round weight, percent round, loin weight, percent loin, flank weight and percent flank. Other characteristics included: total retail, lean trim, fat trim, round steaks, rump, sirloin tip, loin steaks, percent loin steaks and flank steaks. Mating types included straightbred Angus and Santa Gertrudis, the reciprocal crosses of these two breeds and Gelbvieh ${\times}$ Angus. Breed of sire and breed of dam were significant for most of the traits evaluated. Calf year and slaughter group were also significant. This could be the result of environmental variations. Effect of sire within sire breed was non-significant for all the traits considered. Heterosis due to interaction between sire breed ${\times}$ dam breed was found significant for percent total retail cuts based on hindquarter weight. Generally, Santa Gertrudis purebreds were more desirable in cut out characteristics than all other breeding types followed by crossbreds of Angus ${\times}$ Santa Gertrudis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.29-36
• /
• 2004

An experimental study on drilling of stainless steel is conducted using TiAlN coated drills and HSS twist drills with several cutting conditions; feed rate, spindle rotational speed, and dry/wet cutting. The effects of number of hole on the thrust force are examined by cutting force measurement. The flank wear of the drills and the change of hole diameter are quantitatively observed using a vision system. It is found that the thrust force in drilling with TiAlN coated drills decrease under dry and wet machining, whereas the flank wear resistance is improved.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.251-256
• /
• 1999

"Ploughing" on the flank face of the tool in the metal cutting process is due to the tool in the metal cutting process is due to the finite edge radius of the tool and due to the development of flank wear. Because of the high stresses near the cutting edge, elastic-plastic deformation would be caused between the tool and the machined surface over a small area of the tool flank. The deformation would affect the roughness of the machined surface. Recently, some attempts have been made to predict the surface roughness, but elastic-plastic effect due to ploughing in the cutting process has not been considered. The research has analyzed mechanism of the ploughing of the cutting process using contact mechanics. Tool and workpiece material properties have been taken into account in the prediction of the surface roughness. The surface roughness has been simulated by the surface-shaping system. The results between experiment and simulation have been compared and analyzed. analyzed.

• Journal of Korea Multimedia Society
• /
• v.21 no.3
• /
• pp.333-341
• /
• 2018

In this paper, we propose an algorithm to automatically detect gait's joints. The proposed method classifies gait's types into front gait and flank gait so as to automatically detect gait's joints. And then according to classified types, the proposed applies joint extracting algorithm to input images. Firstly, we split input images into foreground image using difference images of Hue and gray-scale image of input and background one and extract gait's object. The proposed method classifies gaits into front gait and flank gait using ratio of Face's width to torso's width. Then classified gait's type, joints are detected 10 at front gait and detected 7~8 at flank gait. The proposed method is applied to the camera's input and the result shows that the proposed method automatically extracts joints.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.253-257
• /
• 2013

The objective of this study was to compare the total surgical time, pain score and hemorrhage after ovariohysterectomy (OVH) and bilateral flank ovariectomy (BFOVE) with hemoclips in dogs. OVH was operated on six dogs and BFOVE was performed on six dogs. In BFOVE group, both ovarian pedicle hemostasis applied using hemoclips after removing ovaries. Total surgical time was recorded from starting incision of skin to closure last skin suture. Pain score was measured at 2, 6, 12, and 24 hours after surgery based on University of Melbourne Pain Scale (UMPS). Hemorrhage around clipping area, uterus, abdominal muscles, and skin were monitored after surgery. BFOVE technique could reduce total surgical time and pain after surgery. There was no hemorrhagic problems near ovarian pedicles following surgery. BFOVE with hemoclips could be useful and recommended for sterilization in dog.