• 제목/요약/키워드: Flame displacement

검색결과 26건 처리시간 0.196초

직접수치해법을 이용한 난류 예혼합 화염전파속도 연구 (Roles of displacement speed of premixed flame embedded in isotropic turbulent decaying flow)

  • 한인석;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.177-186
    • /
    • 2006
  • Flame surface area is a critical parameter determining turbulent flame speed. Three-dimensionaldirect numerical simulations (DNS) were conducted to figure out the evolution process of flame surface area. Fully compressible Navier-Stokes equations are solved to reproduce premixed flame embedded in isotropic decaying turbulent flow. The tangential straining and curvature of propagating surface affect development of flame area. In this study, four different turbulent intensity flows and three different Le number flames are investigated to force changes in straining and curvature effects. Consistent results are obtained for the probability density functions (PDF) of strain and curvature with previous researches. It is revealed that displacement speed, which is a speed of flame surface relative to unburnt flow, controls the balance between sink and source of flame surface area.

  • PDF

직접수치해법을 이용한 난류 예혼합 화염전파속도 연구 (Roles of Displacement Speed of Premixed Flame Embedded in Isotropic Turbulent Decaying Flow)

  • 한인석;허강열
    • 한국연소학회지
    • /
    • 제12권2호
    • /
    • pp.10-19
    • /
    • 2007
  • Flame surface area is a critical parameter determining turbulent flame speed. Three-dimensional direct numerical simulations(DNS) were conducted to figure out the evolution process of flame surface area. Fully compressible Navier-Stokes equations are solved to reproduce premixed flame embedded in isotropic decaying turbulent flow. The tangential straining and curvature of propagating surface affect development of flame area. In this study, four different turbulent intensity flows and three different Le number flames are investigated to force changes in straining and curvature effects. Consistent results are obtained for the probability density functions (PDF) of strain and curvature with previous researches. It is revealed that displacement speed, which is a speed of flame surface relative to unburnt flow, controls the balance between sink and source of flame surface area.

  • PDF

0.57의 L/D 비를 가지는 폭발챔버에서 전파하는 화염과 다중 장애물의 상호작용에 관한 실험적 연구 (Experimental Studies on the Interactions between Propagating Flames and Different Multiple Obstacles in an Explosion Chamber with a L/D Ratio of 0.57)

  • 박달재
    • 한국안전학회지
    • /
    • 제27권6호
    • /
    • pp.70-77
    • /
    • 2012
  • Experimental investigations were performed to examine the characteristics of propagating flame fronts around multiple bars within a rectangular chamber. The explosion chamber is 400 mm in height, $700{\times}700mm^2$ in cross-section and has a large top-venting area, $A_v$, of $700{\times}210mm^2$. This results in a value of 0.44 for $A_v/V^{2/3}$ and a L/D value of 0.57. The multiple obstacles of length 700 mm with a blockage ratio of 30 % were placed within the chamber. Temporally resolved flame front images were recorded by a high speed video camera to investigate the interaction between the propagating flame and the obstacles. Results showed that the flame propagation speeds before the flame impinges onto the obstacle almost equal to the laminar burning velocity. As the propagating flame impinged on the obstacle, the central region of flame began to become concave, this resulted in the flame deceleration in the region. As the flame interacted with the modified flow filed generated behind the central obstacle, the probability density functions(PDFs) of the local flame displacement speed were extensively distributed toward higher speeds.

직사각형 폭발 챔버에서 화염전파와 직사각형 장애물의 상관관계 (Interactions Between a Propagating Flame and Rectangular Wall Obstacles in a Rectangular Confinement)

  • 박달재;이태성;이영순
    • 한국안전학회지
    • /
    • 제23권2호
    • /
    • pp.81-86
    • /
    • 2008
  • 직사각형 폭발 챔버에서 전파하는 화염과 직사각형 장애물의 상관관계를 조사하기 위한 실험적 연구가 수행되었다. 챔버내에 10%, 20%및 30%의 blockage ratio를 가지는 3가지 직사각형 장애물들이 사용되었다. 전파하는 화염과 장애물의 상관관계를 조사하기 위해 고속카메라가 사용되었다. 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염속도 및 그 화염속도의 확률밀도함수가 계산되었다. 실험결과, 전파하는 화염이 직사각형 장애물의 모서리와 상호작용할 때 국부 화염속도는 증가하였다. 그 증가속도는 장애물의 Blockage Ratio가 증가할 때 더욱 커지는 것으로 나타났다. 그러나, 평균화염속도는 Blockage Ratio에 큰 의존성을 가지지 않는 것으로 나타났다. 이 연구에서 사용된 작은 L(Lenlgth)/D(Diameter)비를 가지는 폭발 챔버내에서 전파하는 화염전면과 직사각형 장애물과의 상관관계는 L/D비가 큰 문헌에서 보고된 결과와 비교하면, Blockage Ratio에 따른 의존성은 작은 것으로 나타났다.

Interactions between Propagating Flame Fronts and Obstacles in an Explosion Chamber with a H/L Ratio of 0.86

  • Park, Dal Jae
    • 한국가스학회지
    • /
    • 제17권1호
    • /
    • pp.13-18
    • /
    • 2013
  • 높이/길이 비가 0.86을 가지는 폭발챔버 내에서 전파하는 화염과 서로 다른 형태의 다중 장애물 사이의 상호작용을 조사하기 위해 폭발실험을 수행하였다. 챔버 내에 장애물 형태는 삼각기둥, 사각기둥 및 원통형으로 변화시켰으며, 장애물의 blockage ratio는 0.43으로 하였다. 전파하는 화염과 장애물 형태에 따른 상호작용을 조사하기 위해 고속카메라를 사용하였으며, 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염속도 및 그 화염속도의 확률밀도함수를 계산하였다. 실험결과, 장애물 형태가 삼각형이었을 때 국부 화염속도가 가장 높게, 원형에서는 가장 낮게 나타났으며, 장애물 후류에서의 국부 화염속도는 장애물 형태에 큰 의존성을 가지는 것으로 나타났다. 또한, 전파하는 화염이 장애물 후류의 미연소가스의 유동과 상호작용할 때 국부 화염속도의 확률밀도함수는 화염속도가 높은 방향으로 광범위하게 분포되는 것으로 나타났다.

Characteristics of Propagating Tribrachial Flames in Counterflow

  • Ko, Young-Sung;Chung, Tae-Man;Chung, Suk-Ho
    • Journal of Mechanical Science and Technology
    • /
    • 제16권12호
    • /
    • pp.1710-1718
    • /
    • 2002
  • The effect of fuel concentration gradient on the propagation characteristics of tribrachial (or triple) flames has been investigated experimentally in both two-dimensional and axisymmetric counterflows. The gradient at the stoichiometric location was controlled by the equivalence ratios at the two nozzles; one of which is maintained rich, while the other lean. Results show that the displacement speed of tribrachial flames in the two-dimensional counterflow decreases with fuel concentration gradient and has much larger speed than the maximum speed predicted previously in two-dimensional mixing layers. From an analogy with premixed flame propagation, this excessively large displacement speed can be attributed to the flame propagation with respect to burnt gas. Corresponding maximum speed in the limit of small mixture fraction gradient was estimated and the curvefit of the experimental data substantiates this limiting speed. As mixture fraction gradient approaches zero, a transition occurs, such that the propagation speed of tribrachial flame approaches stoichiometric laminar burning velocity with respect to burnt gas. Similar results have been obtained for tribrachial flames propagating in axisymmetric counterflow.

비예혼합 튜브형상내 화염셀의 거동에 대한 수치 해석적 연구 (A Numerical Study of the Flame Cell Dynamics in Opposed Nonpremixed Tubular Configuration)

  • 박현수;유춘상
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.175-178
    • /
    • 2014
  • The flame cell dynamics in 2-D opposed nonpremixed tubular configuration was investigated using high-fidelity numerical simulations. The diffusive-thermal instability occurs as the $Damk{\ddot{o}}hler$ number, Da, approaches the 1-D extinction limit of the tubular flames and several flame cells are generated depending on Da, and flame radius. In general, the number of flame cells are found close to the largest wave number from the linear stability analysis. It was also found from the displacement speed analysis that during the local flame extinction and cell formation, negative edge flame speed is observed due to small gain from reaction compared to large loss from diffusion.

  • PDF

가솔린엔진에서의 2차원 화염 가시화 (2-Dimensional Visualization of the Flame Propagation in a Four-Valve Spark-Ignition Engine)

  • 배충식
    • 한국연소학회지
    • /
    • 제1권1호
    • /
    • pp.65-73
    • /
    • 1996
  • Flame propagation in a four-valve spark-ignition optical engine was visualized under lean-bum conditions with A/F=18 at 2000rpm. The early flame development in a four-valve pentroof-chamber single-cylinder engine was examined with imaging of the laser-induced Mie scattered light using an image-intensified CCD camera. Flame profiles along the line-of-sight were also visualized through a quartz piston window. Two-dimensional flame structures were visualized with a Proxitronic HF-1 fast motion camera system by Mie scattering from titanium dioxide particles along a planar laser sheet generated by a copper vapor laser. The flame propagation images were subsequently analysed with an image processing programme to obtain information about the flame structure under different tumble flow conditions generated by sleeved and non-sleeved intake ports. This allowed enhancement of the flame images and calculation of the enflamed area, and the displacement of its center, as a function of the tumble flow induced by the pentroof-chamber in the vicinity of spark plug. Image processing of the early flame development quantified the correlation between flame and flow characteristics near the spark plug at the time of ignition which has been known to be one of the most important factors in cyclic combustion variations in lean-burn engines. The results were also compared with direct flame images obtained from the natural flame luminosity of the lean mixture.

  • PDF

Numerical analysis on the rapid fire suppression using a water mist nozzle in a fire compartment with a door opening

  • Lee, Jaiho
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.410-423
    • /
    • 2019
  • Fire suppression using a water mist nozzle directly above an n-Heptane pool in a fire compartment with a door opening was numerically investigated using the Fire Dynamics Simulator (FDS) for the purpose of application in nuclear power plants. Input parameters for the numerical simulation were determined by experimental measurements. Water mist was activated 10 s after the fire began. The sensitivity analysis was conducted for three input parameters: total number of cubic cells of 6032-2,926,400, droplets per second of 1000-500,000, and extinguishing coefficient of 0-100. In a new simple calibration method of this study, the extinguishing coefficient yielding the fire suppression time closest to that measured by experiments was found for use as the FDS simulation input value. When the water mist jet flow made contact with the developed fire, the heat release rate instantaneously increased, and then rapidly decreased. This phenomenon occurred with a displacement of the flame near the liquid fuel pool. Changing the configuration of the door opening with different aspect ratios and opening ratios had impact on the maximum value of the heat release rate due to the flame displacement.

Experimental Studies on the Interaction Between a Propagating Flame and Multiple Obstacles in a Rectangular Chamber

  • Park, Dal-Jae;Ahn, Jeong-Jin;Lee, Young-Soon
    • 한국가스학회지
    • /
    • 제12권1호
    • /
    • pp.54-61
    • /
    • 2008
  • Experimental investigations were performed to assess the influences of different multiple obstacles on flame propagation in a rectangular confinement. Three different multiple obstacles were used: circular, triangular and square cross-sections with blockage ratios of 15% and 30%. The same method described in Park et al. [13] to investigate the interaction between the propagating flame and the obstacle was applied. Before the freely propagating flame impinged on the obstacle, the flame propagation speed remains close to the laminar burning velocity, regardless of the obstacles used. The reported data revealed that the trend in increase of the local flame propagation speed is a result of the interaction between the obstacle and the propagating flame front behind the obstacle. The local speed was found to increase from a circular to a triangular and a square obstacle. The mean flame speed was found to be less dependent on both the obstacle types and the different blockage ratios used.

  • PDF