• 한국연소학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 2008

Emission characteristics of NOx and CO with heat loss under high efficiency combustion conditions of $CH_4$/Air prmixed flame were examined numerically using detailed-kinetic chemistry. The one-dimensional combustor length was fixed 5cm, and the equivalence ratio was varied from 0.75 to 0.95. To consider the effects of heat loss on NOx and CO formation, the radiative heat loss rate and combined heat loss rate of conductive and convective heat transfer are included. The following conclusions were drawn. In order to reduce the NOx and CO emission level simultaneously, the temperature of product gases must be reduced under 1,800K as soon as possible but kept over 1,300K during the residence time which is needed to converge CO to $CO_2$.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.3-9
• /
• 2003

By utilizing a semi-empirical soot model, the applicability of the laminar flamelet concept for simulating the formation and oxidation of soot in the laminar diffusion flame has been studied. The source terms for two transport equations of the soot formation and oxidation are calculated in the mixture fraction/scalar dissipation rate space for laminar flamelets and stored in a library. In this study, emphasis is given to the interaction associated with radiation and soot formation. The radiative heat loss is obtained by solving the radiative transfer equation using the unstructured grid finite volume method with the WSGGM. The calculated temperatures and soot volume fractions agree relatively well with the experimental data and the previous numerical results of Kaplan et al. using the detailed chemistry.

• 한국분무공학회지
• /
• 제16권1호
• /
• pp.37-43
• /
• 2011

The present study conducted computational simulation for multiphase flow in the flame spray coating process with commercially available Ni-Cr powders. The flows in a flame spray gun is characterized by very complex phenomena including combustion, turbulent flows, and convective and radiative heat transfer. In this study, we used a commercial computational fluid dynamics (CFD) code of Fluent (ver. 6.3.26) to predict gas dynamics involving combustion, gas and particle temperature distributions, and multi-dimensional particle trajectories with the use of the discrete phase model (DPM). We also examined the effect of particle size on the flame spray process. It was found that particle velocity and gas temperature decreased rapidly in the radial direction, and they were substantially affected by the particle size.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.680-685
• /
• 2000

Investigation on ignition and flame propagation of pyrolyzing fuel in a cylindrical enclosure is accomplished. The pyrolyzing fuel of cylindrical shape is located in an outer cylinder sustained at high-temperature. Due to gravity, the buoyancy motion is inevitably incurred in the enclosure and this affects the flame initiation and propagation behavior. The radiative heat transfer plays an important role since a high temperature difference is involved in the problem. Numerical studies have been performed over overheat ratio, and vertical fuel eccentricity. The location of flame onset is affected by the vertical eccentricity of inner pyrolyzing fuel as well as thermal conditions applied.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1652-1660
• /
• 1990

본 연구에서는 원관내에서 복사에 관여하는 고온의 가스유동에 의한 복사열전 달과 대류열전달간의 상호작용에 대해 실험과 수치해석을 통하여 고찰하고자 한다. 실험으로는 프로판가스의 화염생성에 의한 속도, 온도 및 벽면에서의 열유속분포를 측 정하고, 수치적으로는 냉염(cold flame) 상태서 측정한 난류요동성분과 연소시의 입구 속도와 온도를 초기조건으로 하여 밀도와 점성계수의 온동에 따른 변화를 고려한 K-.epsilon. 모델과 구조화근사법 및 최근에 개발되어 사용되기 시작한 Weighted Sum of Gray Gas- es모델을 사용하여 속도, 온도 및 열유속 분포를 계산하여 수치해석의 결과와 실험결 과를 비교함으로써 모델의 타당성을 검증하고, 복사에 의한 열전달량과 대류에 의한 열전달량을 분리하여 각 모드가 온도분포 및 열유속분포에 미치는 영향을 고찰하고자 한다.

• Coupled systems mechanics
• /
• 제1권3호
• /
• pp.285-295
• /
• 2012

In this paper, two types of porous burners with radial and axial flow have been modeled numerically and compared. For this purpose, governing equations were solved one-dimensionally for methane-air premix gas. The mechanism used in simulating combustion phenomenon was 15 stage reduced mechanism based on GRI3.0. In order to compare the two burners, the inlet flow rate and fuel-air ratio have been assumed equal for the two burners. The results of the study indicated that reduction in speed and increase in cross-section area in the direction of flow have a considerable influence on the behavior of radial burner in comparison to axial burner. Regarding temperature distribution inside the burner, it was observed that the two above mentioned factors can be influential in temperature of flame propagation region. Also, regarding distribution of CO and NO emission, the results indicate that the porous radial burner has lower emissions in comparison to the axial once. The output radiative heat transfer efficiency of the two burners was also compared and in this case also even the radial porous burner was found to be preferable.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.962-978
• /
• 1989

본 연구에서는 저자들이 이미 발표한 난류 화염에서의 매연 농도 분포 해석을 포함한 화염 구조 및 복사 열전달의 해석에 대한 연구와 관련하여, 난류 화염에서의 생성된 매연 입자의 재연소 속도에 관한 새로운 모델을 제시한다.구체적인 방법 으로, 난류 화염에 대한 난류 지배 방정식의 매듭(closure) 문제로서 문제가 되고 있는 난류 모델과 반응 속도 모델에 대해서는 비교적 잘 정립되어 있다고 할 수 있는 축대칭 분류 유동을 선택하여, 난류 모델과 난류 연소 속도 모델을 고정하고, 난류 화염에서의 매연 생성 및 연소 모델을 검토하였다.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1113-1120
• /
• 1988

본 연구에서는 4종류의 실험 모델을 채택하여 연소 반응용다공성 블럭(combu- stive reacting porous block)내의 화염대 위치와 화염의 온도 분포, 화염이 안정화 되는 범위를 고찰하여 내부 열재순환 효과를 규명하고 예열용 다공성 블럭(preheating porous block)과 복사 차폐용 다공성 블럭(radiative insulating porous block)의 효 과에 대한 연구와 초희박 혼합기나 저 발열량 연료의 연소 가능성을 제시하고 수치 계 산에 필요한 자료를 제시하는 것이다.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.133-142
• /
• 2001

Investigation on ignition and flame propagation of pyrolyzing fuel in a cylindrical enclosure is accomplished. The pyrolyzing fuel of cylindrical shape is located in an outer cylinder sustained at high-temperature. Due to gravity, the buoyancy motion is inevitably incurred in the enclosure and this affects the flame initiation and propagation behavior. The radiative heat transfer plays an important role since a high temperature difference is involved in the problem. Therefore in all cases presented here, the intrinsic radiation effects are considered. Numerical studies have been performed over various governing parameters, such as Grashof number, overheat ratio, and vertical fuel eccentricity. Depending on the Grashof number, the flame behavior is found to be totally different: a separated visible flame appears as the Grashof number reaches 10(sup)7. The location of flame onset is also affected by the vertical eccentricity of inner pyrolyzing fuel as well as thermal conditions applied.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.68-75
• /
• 2005

By utilizing a semi-empirical soot model, the applicability of the laminar flamelet concept fur simulating the formation and oxidation of soot in the laminar diffusion flame has been studied. The source terms for two transport equations of the soot formation and oxidation are calculated in the mixture fraction/scalar dissipation rate space for laminar flamelets and stored in a library. In this study, emphasis is given to the interaction associated with radiation and soot formation. The radiative heat loss is obtained by solving the radiative transfer equation using the unstructured grid finite volume method with the WSGGM. The calculated temperatures and soot volume fractions agree relatively well with the experimental data and the previous numerical results of Kaplan et al. using the detailed chemistry.