• 한국가스학회지
• /
• 제12권1호
• /
• pp.54-61
• /
• 2008

Experimental investigations were performed to assess the influences of different multiple obstacles on flame propagation in a rectangular confinement. Three different multiple obstacles were used: circular, triangular and square cross-sections with blockage ratios of 15% and 30%. The same method described in Park et al. [13] to investigate the interaction between the propagating flame and the obstacle was applied. Before the freely propagating flame impinged on the obstacle, the flame propagation speed remains close to the laminar burning velocity, regardless of the obstacles used. The reported data revealed that the trend in increase of the local flame propagation speed is a result of the interaction between the obstacle and the propagating flame front behind the obstacle. The local speed was found to increase from a circular to a triangular and a square obstacle. The mean flame speed was found to be less dependent on both the obstacle types and the different blockage ratios used.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.45-56
• /
• 2001

A constant volume combustion chamber is employed to investigate the initial flame kernel development and flame propagation of gasoline-air mixtures with various ignition systems, ignition energy and spark plug electrodes. To do this research, four ignition systems are designed and manufactured, and the ignition energy is controlled by varying the dwell time. Several kinds of spark plugs are also made to analyze the effects of electrodes on flame kernel development. The velocity of flame propagation is measured by the laser deflection method. The output laser beam from He-Ne laser is divided into three parallel beams by a beam splitter. The splitted beams pass through the combustion chamber. They are deflected when contacted with flame front, and the voltage signals from photodiodes change due to deflection. The results show that higher ignition energy raises the flame propagation speed especially under the fuel lean operation. The wider electrode gap, smaller electrode diameter and sharper electrode tip make the speed of the initial flame propagation faster. The speed of the initial flame propagation is affected by electrode material as well. Electrode material with lower melting temperature help the initial flame propagation.

• 한국안전학회지
• /
• 제13권3호
• /
• pp.119-125
• /
• 1998

In long vertical duct, the aspect of second flame in laminar flame propagating through lycopodium-air mixtures and the behavior of dust particles in neighborhood in front of flame have been examined experimentally. In order to trace the development of second flame to its origin, the velocity and vorticity distribution of dust particles in front of flame were measured by using with the real-time PIV system. The velocity of particles was approximately zero at the central part of flame front and the ahead of the flame leading edge, but maximum near the duct wall. The flame velocity of second flame and the movement of leading flame edge depend mainly on behavior of dust particles by the flow distribution of temperature and pressure.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.9-16
• /
• 2002

In plasma jet ignition, combustion enhancement effects occur toward the plasma jet issuing direction. Therefore, when the igniter is attached at the center of a cylindrically shaped combustion chamber, plasma jet should issue toward the round combustion chamber wall. The plasma jet igniter that had an annular circular orifice has been developed. The purpose of this study is to elucidate the relationship between the newly developed plasma Jet igniter configuration and combustion enhancement effects. In this newly developed plasma Jet igniter, flame front wrinkle appears on the flame front and flame propagates rapidly. Plasma Jet influences on the flame propagation far long period when the plasma jet igniter has issuing angle 90 degrees and large cavity volume, because the plasma jet only lasts several ms. However, in the early stage of combustion, flame front area of issuing angle 45 degrees is larger than that of 90 degrees, because the initial flame kernel is formed by the plasma jet.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.204-215
• /
• 2011

화염 안정성은 층류부상화염의 중요한 메커니즘 중 하나이며 화염전파속도는 화염안정화를 평가하기 위한 척도가 된다. Bilger는 삼지점을 기준으로 혼합분율과 화염의 형상에 관계된 삼지화염의 화염 전파속도 및 안정화 메키니즘을 제시하였다. 그러나 동축류 작은 노즐을 이용한 실험과 수치해석에서는 화염이 형성되고 소화되는 전 과정을 상세히 관찰 할 수는 없었다. 본 논문에서는 노즐 직경에 따른 화염거동과 화염 형상 및 안정화 메커니즘에 대하여 세분화하였다. 본 논문의 결과로 노즐에 따른 삼지화염의 거동과 삼지화염전파, 화염면 전파 및 평면화염의 존재 등을 구분하였다. 그리고 삼지화염전파 거동에 있어서 열린삼지화염전파 및 닫힌 삼지화염전파 거동에 대해 구분하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.102-111
• /
• 2004

Partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics to develope a prediction model for the turbulent lift off. The present study is specifically aimed to remedy the problem of the stiff transition of the conditioned partial burning probability across the crossover condition by adopting level-set method which describes propagating or retreating flame front with specified propagation speed. In light of the level-set simulations with two model problems for the propagation speed, the stabilizing conditions for a turbulent lifted flame are suggested. The flame hole dynamics combined with level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping. The probability to encounter reacting' state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate in contrast to the stiff transition of resulted from the flame-hole random walk mapping and could be attributed to the finite response of the flame edge propagation.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.1-6
• /
• 2011

본 연구에서는 정상초음파장의 간섭에 의해 야기되는 예혼합화염의 구조 변이를 규명하기 위한 실험 결과를 제시한다. 화염전파를 관찰하기 위해 슐리렌 기법을 이용하였으며, 초기압력 및 연소챔버 개방 유무에 따른 화염선단의 형태 및 화염 전파속도를 고찰하였다. 정상초음파장에 의한 화염선단의 찌그러짐이 관찰되었고, 초음파장의 특성이 변하지 않는 한 그 수직방향으로의 위치는 일정하였다. 정상초음파의 영향을 받은 화염은 전파할수록 구조적 변화가 심해졌으며, 전파속도 또한 증가하였다. 반사파와 정상초음파의 영향으로 연꽃모양의 화염(lotus flame)이 형성되는 사실을 발견할 수 있었다.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.1-8
• /
• 2012

본 연구에서는 정상초음파의 간섭에 의해 야기되는 프로판/공기 예혼합화염의 사각관내 전파거동 및 구조안정화를 규명하기 위한 실험결과를 제시한다. 전파화염의 이미지는 고속카메라를 이용하여 획득하였으며, 이미지 후처리를 통해 정상초음파 유무에 따른 화염선단의 구조변이와 전파속도를 상세히 관찰하였다. 전파속도는 정상초음파가 교반하는 경우 증가하였으며, 이론당량비에서 벗어남에 따라 초음파의 영향은 보다 크게 발현하였다. 정상초음파에 의한 화학반응과 혼합의 촉진은 화염선단의 형상에 대한 부력의 영향을 압도하여 화염의 구조적 안정화에 기여한다.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1240-1247
• /
• 2006

Large eddy simulation of turbulent premixed flame in turbulent channel flow is studied by using G-equation. A flamelet model for the premixed flame is combined with a dynamic subgrid combustion model for the filtered propagation flame speed. The objective of this work is to investigate the validity of the dynamic subgrid G-equation model to a complex turbulent premixed flame. The effect of model parameters of the dynamic sub grid G-equation on the turbulent flame speed is investigated. In order to consider quenching of laminar flames on the wall, wall-quenching damping function is employed in this calculation. In the present study, a constant density turbulent channel flow is used. The calculation results are evaluated by comparing with the DNS results of Bruneaux et al.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1669-1680
• /
• 1998

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results. Including volume expansion, the flow field is adjusted to accommodate the increased volume flow rate which crossing the flame front and the result predicts the same behavior of measured velocity field qualitatively. The effect of increasing volume expansion does not change the initial growth rate of flame area but increase the residence time. Consequently this effect increases the maximum area of flame front. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.