• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1293-1316
• /
• 2021

Using directional antennas in wireless Ad hoc networks has many superiorities, including reducing interference, extending transmission range, and increasing space division multiplexing. However, directional transmission introduces two problems: deafness and directional hidden terminals problems. We observe that these problems result in saturation throughput disparity among the competing flows in directional CSMA/CA based Ad hoc networks and bring challenges for modeling the saturation throughput of the flows. In this article, we concentrate on how to model and analyze the saturation throughput disparity of different flows in directional CSMA/CA based Ad hoc networks. We first divide the collisions occurring in the transmission process into directional instantaneous collisions and directional persistent collisions. Then we propose a four-dimensional Markov chain to analyze the transmission state for a specific node. Our model has three different kinds of processes, namely back-off process, transmission process and freezing process. Each process contains a certain amount of continuous time slots which is defined as the basic time unit of the directional CSMA/CA protocols and the time length of each slot is fixed. We characterize the collision probabilities of the node by the one-step transition probability matrix in our Markov chain model. Accordingly, we can finally deduce the saturation throughput for each directional data stream and evaluate saturation throughput disparity for a given network topology. Finally, we verify the accuracy of our model by comparing the deviation of analytical results and simulation results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.5
• /
• pp.65-72
• /
• 2021

700 W class laboratory model Hall thruster, which can be used for the orbit control or station keeping of small satellites, was developed. The size of the discharge channel was determined using a scaling law, and the magnetic field was designed to be symmetric with respect to the midline of the discharge channel and to be maximized outside the discharge channel. Base pressure of a vacuum chamber was maintained below 2.0×10^-5 Torr during experiments, and the thrust was measured by a thrust stand. The anode flow rate and coil current were varied with the fixed anode voltage at 300 V. Under the operation condition at 2.36 mg/s anode flow rate and 2.4 A coil current, performance was optimized as 38 mN thrust, 1,540 s total specific impulse, and 50 % anode efficiency at 620 W anode power.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.393-426
• /
• 2020

In the past, holy sites were mainly designated on a basis of archaeological norms and endowed with a specific fixed identity according to historical, religious, and contextual interpretations. However, approaches to these sites are more flexible in recent times. These locations transcend the boundaries of space and time to enable the experience of diverse transformation and reveal multiple religious identities which are embedded in the complex interaction between power and authority. In this regard, the dynamic meanings of the religious symbology of Daesoon Jinrihoe's temple complexes, imagery, and the spatial structures enable us to grant them a new identity by re-establishing these structures as World Heritage sites. Temple complexes (dojang) correspond to the outstanding universal values identified by UNESCO in that the spiritual activities conducted at these holy sites draw the same attention as would be drawn by historical value. In this context, this study aims to explore the potential for Daesoon Jinrihoe's temple complexes to be designated UNESCO world heritage sites. To carry out this study, existing religious heritage sites such as Mount Athos Monasteries in Greece and Lumbini in Nepal are examined as case studies, and the operational plan, conservation, protection of relics, and interaction with its neighboring community and tourists are likewise closely examined in this study.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.103-113
• /
• 2022

As globalization progresses and localization takes place, interest in local culture is increasing. In line with this trend, the Cultural Heritage Administration has been promoting the Cultural Heritage Night Tour Project as a night-type cultural property tourism content since 2016. Cultural property nightlife, part of the regional regeneration project, creates new added value by converging and combining various historical and cultural-related contents centered on local cultural heritage. Although the "cultural nightlife" has been greatly activated, it is judged that changes are needed to continue. This is because fixed nightlife programs are positive in terms of establishing a nationwide network, but there is a limitation in that they cannot be standardized and expanded to various forms. Therefore, in this study, the meaning and limitations of nightlife programs were identified, and cognitive theory applicable to nightlife programs was considered. Through this process, it was confirmed that cognitive poetry's 'circular for dynamic semantic composition', 'surreal foreground', and 'adventures in time and space' can be applied to nightlife programs. As a result of combining cognitive poetry with nightlife programs, it was possible to present a strategy for implementing nightlife programs differentiated from existing nightlife programs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.1
• /
• pp.135-144
• /
• 2022

This paper aimed to analyze the type of urban shrinkage over the past 20 years for four case cities designated as abandoned mining area promotion zones and present the direction of future urban spatial policies through the analysis of shrinking status. According to the analysis of urban shrinkage in the past 20 years, all of the case cities were analyzed as fixed-type shrinking cities, showing a population decrease of more than 30% over the past 40 years compared to the peak population. Despite the decrease in population, the designated area of urbanization and non-urban areas is increasing every year, and the development permit and construction permit in non-urban areas are also increasing, requiring efficient management and operation of urban space. It is necessary to study military-level cities in the high-risk phase of extinction in the future, and to develop various indicators for segmentation of urban shrinkage types and analysis of status by type.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.667-681
• /
• 2020

Background and objective: Recently, there has been an increasing need for relaxation and familiarity with nature in residential and living spaces faced daily by urban residents, leading to a growing social interest in urban gardens. The aim of this study was to determine how gardens in a city provide physical and social benefits, comparing cases in Korea and overseas. Methods: We used the keywords "garden" and "city" for Korea, and "urban," "garden," and "green" for overseas. We then determined the Korean and overseas research trends in urban gardens by analyzing 63 Korean and 90 overseas articles deemed suitable for this study. Results: As to the types of urban gardens, the most significant type was community gardens, both in Korea and overseas (30.2% and 48.6%, respectively), followed by rooftop gardens in Korea (22.2%) and kitchen gardens overseas (22.2%). Due to the narrow and complex urban structure in Korea, people focus on using rooftop, wall, and alley spaces, and tend to arrange container-type flexible gardens. Overseas there has been a focus on promoting health and reducing food inequality through allotment and kitchen gardens, and a tendency to use a larger area as a fixed form than Korea. In addition, it was found that gardens in urban areas had a positive effect on urban biodiversity. Conclusion: To sum up, gardens in Korea are close to living spaces, and gardens overseas influence the ecosystem with an emphasis on food production. Therefore, creating urban gardens is a method of urban regeneration with a high utility that goes beyond mere food production, both in Korea and overseas, providing comprehensive benefits for the environment (37.73%) and society (62.27%). As such, continuous research on this area of study is needed to create policy guidelines for Korea.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.1
• /
• pp.7-21
• /
• 2022

Purpose: As the pandemic period continues, various attempts are being made to new medical spaces in the medical society. Many hospitals, including existing general hospitals, have been effected by infected patients and are showing limitations in patient care capacity. Mobile-hospitals may be the starting point for the development of new environment in the medical society and healthcare facilities which are not replacing the role of existing hospitals. Mobile-hospitals can possibly respond to situations that require medical services and provide emergency care for various demands in connection with existing healthcare facilities. Methods: Through a total of five investigations/analysis, medical functions that can be inserted into mobile-hospitals based on modular architecture are set. The first is the analysis of domestic legal guidelines, the second is the analysis of previous studies, the analysis of emergency medical facilities and other medical spaces of hospitals to be compared, the fourth is the analysis of medical spaces of actual mobile hospital projects. Results: Through five analyses, medical functions applicable to the modular building platform were finally established. Mobile hospitals can be used not only in disaster sites such as infectious diseases, but also in medical underprivileged areas or general hospitals. Therefore, it is necessary to establish medical functions that meet the specificity of mobile hospitals along with the functions of existing fixed medical facilities. Furthermore, various studies such as use in international aid, use in normal times, and connection with other platform-based medical facilities are considered necessary. Implications: Through 5 strategies of analysis, 41 medical functions which can be applied to UNIT are decided and these functions will be placed where medical services will be required.

• Clean Technology
• /
• v.29 no.1
• /
• pp.39-45
• /
• 2023

To investigate the effects of Mg addition at different aging times and temperatures, Cu/MgO/Al₂O₃ catalysts were synthesized for the low-temperature water gas shift (LT-WGS) reaction. The co-precipitation method was employed to prepare the catalysts with a fixed Cu amount of 30 mol% and varied amounts of Mg/Al. Synthesized catalysts were characterized using XRD, BET, and H₂-TPR analysis. Among the prepared catalysts, the highest CO conversion was achieved by the Cu/MgO/Al₂O₃ catalyst (30/40/30 mol%) with a 60 ℃ aging temperature and a 24 h aging time under a CO₂-rich feed gas. Due to it having the lowest reduction temperature and a good dispersion of CuO, the catalyst exhibited around 65% CO conversion with a gas hourly space velocity (GHSV) of 14,089 h-1 at 300 ℃. However, it has been noted that aging temperatures greater or less than 60 ℃ and aging times longer than 24 h had an adverse impact, resulting in a lower surface area and a higher reduction temperature bulk-CuO phase, leading to lower catalytic activity. The main findings of this study confirmed that one of the main factors determining catalytic activity is the ease of reducibility in the absence of bulk-like CuO species. Finally, the long-term test revealed that the catalytic activity and stability remained constant under a high concentration of CO₂ in the feed gas for 19 h with an average CO conversion of 61.83%.

• Publications of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.1-12
• /
• 2023

Numerous Sundials were fabricated during the reign of King Sejong of the Joseon Dynasty. One among them is Jeongnam-Ilgu (the Fixing-South Sundial), where the time can be measured after setting up the suitable meridian line without a compass. We reconstructed the new Jeongnam-Ilgu model based on the records of 'Description of Making the Royal Observatory Ganui (簡儀臺記)' in the Veritable Record of King Sejong. Jeongnam-Ilgu has a summer solstice half-ring under a horizontal ring which is fixed to two pillars in the north and south, and in which a declination ring rotates around the polar axis. In our model, the polar axis matches the altitude of Hanyang (that is Seoul). There are two merits if the model is designed to install the polar axis in the way that enters both the north and south poles and rotates in them: One is that it is possible to fix the polar axis to the declination ring together with the cross-strut. The other is that a twig for hanging weights can be protruded on the North Pole. The declination ring is supposed to be 178 mm in diameter and is carved on the scale of the celestial-circumference degrees on the ring's surface, where a degree scale can be divided into four equal parts through the diagonal lines. In addition, the time's graduation that is drawn on the summer solstice half-ring makes it possible to measure the daytime throughout the year. An observational property of Jeongnam-Ilgu is that a solar image can be obtained using a pin-hole. The position cast by the solar image between hour circles makes a time measurement. We hope our study will contribute to the restoration of Jeongnam-Ilgu.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2009

In this paper, we deal an implementation of the software that produces sub-optimal solution of cutting-ironbar planning problem using dynamic programming. Generally, it is required to design an optimization algorithm to accept the practical requirements of cutting ironbar manufacturing. But, this problem is a multiple-sized 1-dimensional cutting stock problem and Linear Programming approaches to get the optimal solution is difficult to be applied due to the problem of explosive computation and memory limitation. In order to overcome this problem, we reform the problem for applying Dynamic Programming and propose a cutting-ironbar planning algorithm searching the sub-optimal solution in the space of fixed amount of combinated columns by using heuristics. Then, we design a graphic user interfaces and screen displays to be operated conveniently in the industry workplace and implement the software using open-source GUI library toolkit, GTK+.