• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.407-410
• /
• 2005

This paper describes an evaluation of reinforcement tension in RC beams using the variable truss models. The models were examined with the beam test results by Kim, Kim and White. Consequently, a fixed inclination $\theta$ at the support un-explains global state of internal force flow in cracked reinforced concrete beams subjected to shear and bending. Accordingly, we must introduce the arch factor for development of consistent model in reinforced concrete beams subjected to shear and bending

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.723-740
• /
• 2016

Reinforced concrete corbels are generally used to transfer loads within a structural system, such as buildings, bridges, and facilities in general. They commonly present low aspect ratio, requiring an accurate model for shear strength prediction in order to promote flexural behavior. The model described here, originally developed for walls, was adapted for corbels. The model is based on a reinforced concrete panel, described by constitutive laws for concrete and steel and applied in a fixed direction. Equilibrium in the orthogonal direction to the shearing force allows for the estimation of the shear stress versus strain response. The original model yielded conservative results with important scatter, thus various modifications were implemented in order to improve strength predictions: 1) recalibration of the strut (crack) direction, capturing the absence of transverse reinforcement and axial load in most corbels, 2) inclusion of main (boundary) reinforcement in the equilibrium equation, capturing its participation in the mechanism, and 3) decrease in aspect ratio by considering the width of the loading plate in the formulation. To analyze the behavior of the theoretical model, a database of 109 specimens available in the literature was collected. The model yielded an average model-to-test shear strength ratio of 0.98 and a coefficient of variation of 0.16, showing also that most test variables are well captured with the model, and providing better results than the original model. The model strength prediction is compared with other models in the literature, resulting in one of the most accurate estimates.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.163-178
• /
• 2022

This paper aimed to study the local bond-slip behavior between ultra-high-performance concrete (UHPC) and a reinforcing bar after exposure to high temperatures. A series of pull-out tests were carried out on cubic specimens of size 150×150×150 mm with deformed steel bar embedded for a fixed length of three times the diameter of the tested deformed bar. The experimental results of the bond stress-slip relationship were compared with the Euro-International Concrete Committee (CEB-Comite Euro-International du Beton)-International Federation for Prestressing (FIP-Federation Internationale de la Precontrainte) Model Code and with prediction models found in the literature. In addition, based on the test results, an empirical model of the bond stress-slip relationship was proposed. The evaluation and comparison results showed that the modified CEB-FIP Model code 2010 proposed by Aslani and Samali for the local bond stress-slip relationship for UHPC after exposure to high temperatures was more conservative. In contrast, for both room temperature and after exposure to high temperatures, the modified CEB-FIP Model Code 2010 local bond stress-slip model for UHPC proposed in this study was able to predict the test results with reasonable accuracy.

• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.1-10
• /
• 2005

The procedures of model test and performance prediction for the CRP-POD propulsion ships, are studied. At the CRP-POD system, which are highly applicable to ultra large container carriers, RPM ratio of two propellers is not fixed, unlike conventional CRP system, and hence the power of each propeller must be predicted respectively. In this paper, a CRP-POD system is designed for 10,000 TEU class ultra large container carriers, and the characteristics of the CRP-POD system are experimentally studied. Finally, based on this study, the procedure of powering performance evaluation for CRP-POD propulsion ships is suggested. However, further studies on quantitative correction of the present procedure are required.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.452-455
• /
• 2008

Model Scramjet engine is tested with T4 free-piston shock tunnel at University of Queensland, Australia. Basically, test condition is fixed as Mach 7.6 at 31 km altitude. With this condition, variation effects of fuel equivalence ratio, cavity, cowl setting and angle of attack were investigated. In the results, supersonic combustion was observed with low and middle fuel equivalence ratio. At high equivalence ratio, thermal choking was occurred due to the intensive reaction. Cavity and W-shape cowl showed early ignition and enhanced mixing respectively.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.85-93
• /
• 2020

This study aimed to explore the impact of macroeconomic (Real GDP growth (GDPG), Inflation rate (INF)) and bank -specific variables (profitability (ROA), capital adequacy (CADEQ), non-performing loans (NPL), deposit growth (DEPG)) on the liquidity (lIQ) of 13 listed Jordanian commercial banks for the period 2011-2018. Panel data analysis, Pooled least square, fixed effects model and random effects model, Lagrange multiplier test, and Hausman test were used. The random effects model output shows that, macroeconomic variables have a significant impact on Jordanian commercial banks liquidity since inflation has a positive impact while GDPG has a negative impact on banks (LIQ). On the other hand among the bank-specific variables capital adequacy and deposit growth have a positive significant impact on banks (LIQ), while (NPL) and (SIZE) have a negative significant impact on Jordanian commercial banks liquidity. But ROA has a negative insignificant impact on (LIQ). The findings of the study suggest that commercial banks departments need to pay attention to the economic and internal variables of banks in order to maintain acceptable levels of liquidity.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.29-36
• /
• 2014

Finite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the Gompertz distribution reliability model, which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination$(R^2)$, for the sake of efficient model, was employed. Analysis of failure using real data set for the sake of proposing fixed shape parameter of the Gompertz distribution was employed. This analysis of failure data compared with the Gompertz distribution model of shape parameter. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the proposed Gompertz model is more efficient in terms of reliability in this area. Thus, Gompertz model can also be used as an alternative model. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can was helped.

• 사회복지연구
• /
• 제49권4호
• /
• pp.195-220
• /
• 2018

본 연구는 청년 가구주의 자산수준이 삶의 만족도에 영향을 미치는지 분석하였고 우울감의 매개효과를 검증하였다. 또한 청년 가구주의 자산수준, 우울감, 그리고 삶의 만족도의 관계를 자산효과이론에 근거하여 설명하고 있다. 본 연구에서는 실증적 연구를 위해 한국복지패널(KOWEPS) 제7차(2012년)~11차(2016년) 자료를 이용하였고 고정효과모형을 적용한 패널회귀분석 및 Sobel-test를 실시하였다. 분석결과, 시간경과에 따라 청년 가구주의 자산수준이 높을수록 삶의 만족도가 높아지는 것으로 나타났고 청년 가구주의 자산수준은 우울감을 매개로 삶의 만족도에 영향을 미치는 것으로 나타났다. 이러한 연구결과를 통하여 우울감을 완화시키고 삶의 만족도를 높일 수 있는 청년층의 자산형성지원사업에 대해 논의하고 있다. 끝으로 청년층의 자산형성지원사업 확대 및 개선 방향을 언급하였고 청년층의 자산형성지원정책에 대한 제언 및 후속연구의 필요성을 제시하였다.

• Ocean and Polar Research
• /
• 제41권1호
• /
• pp.35-46
• /
• 2019

The purpose of this study is to identify factors influencing fish production of shallow-sea aquaculture in South Korea. This study employed the two-way fixed effect and random effect models based on the panel models and also the difference between GMM and system GMM models based on the dynamic panel models using the amount of fish farming production, the number of stocked fry, the number of cultured fish, the amount of inputted feed, the farming area, the number of workers, and the sales price data from 2010 to 2017. First, the two-way fixed effect model of the panel models was selected by panel characteristics, time characteristics and Hausman tests and also the model was statistically significant. As a result of the two-way fixed effect model, the number of stocked fry, the amount of inputted feed, and the number of workers were identified as factors that increase the fish production of shallow-sea aquaculture. However, the number of cultured fish and the sales price were analyzed as factors that reduce the fish production of shallow-sea aquaculture. Second, the system GMM model of the dynamic panel models was selected by Hansen test and Arellano-Bond test in order to identify whether or not the over-discrimination condition is appropriate. Based on the system GMM model, the number of stocked fry, the amount of inputted feed, the number of workers in this year and 1 year ago, the number of cultured fish 2 years ago, and the sale price 3 years ago were analyzed as factors that increase the fish production of shallow-sea aquaculture. However, the amount of fish farming production 1, 2, 3 years ago, the farming area in this year, and the number of cultured fish in this year and 1 year ago were identified as factors that reduce the fish production of shallow-sea aquaculture. In conclusion, this study suggests that it is desirable to control the amount of stocked fry rather than to expand the farming area for fish farming in shallow-sea aquaculture, so as to keep the sale price at a certain level by maintaining the appropriate amount of fish production.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.191-199
• /
• 2021

The study examines the causal relationship between financial development and economic growth through trade openness for the leading ASEAN countries (Indonesia, the Philippines, Malaysia, Singapore, Thailand, and Vietnam). The study employs a panel data for the period of 25 years spanning from 1995 to 2015 for the six countries, yielding a balanced panel of 150 observations. Fixed effect model (FEM) and random effect model (REM) are used for the panel data, following the Hausman test performed for model selection. The trivariate Granger causality test is also used to check for possible relationship between the variables. The results show that REM is chosen based on the Hausman test result, suggesting that the trade openness has a positive association with growth whereas the financial development is positively, but insignificantly associated with growth. The reason for this is that the financial development and economic growth may be related to each other. The results are, then, further explored and confirmed by the causality test. That is, the financial development and the economic growth, through the trade openness, are found to have bidirectional positive relationships. This implies that there would be shortcomings when ignoring the presence of trade openness, which positively impacts the relationship between finance and growth.