• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1191-1198
• /
• 2018

The wind profiler radar provides a standing profile of the wind vector and the atmospheric physical signal for the fixed point. Since the wind vector is calculated by the manufacturer's data processing program, the quality control of the date is limited. Therefore, understanding and exploiting the raw spectrum data need to improve the quality of the wind vector. The raw data of the wind vector is the power spectral density stored in binary form. In this study, an algorithm was completed to transform the raw data into the real spectral density, and the use of raw data was evaluated by retrieving zero-order and first-order moments of the spectral based on the spectrum quality control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.504-511
• /
• 2012

In this paper, level instrument is implemented using beat frequency for distance measurement which means the difference between Tx and Rx signal frequency from FMCW Radar Level Transmitter. Beat frequency is analyzed through Fast Fourier Transform of which frequency precision can be improved by applying Zoom FFT. Distance precision is improved from 146.5[mm] to 5[mm] using the advantage of Zoom FFT which can raise the frequency precision without changing the sampling frequency or FFT point number to be fixed in the beginning of designing signal processing. Also, measurement error can be reduced within 2[mm] by incresing the FFT points using the method of Spline interpolation. For verifying the effectiveness of this Zoom FFT to FMCW Radar Level Transmitter, test bench is made to measure the distance for every 1[mm] between 700[mm] and 2000[mm] and measurement error can be checked in the range of ${\pm}2$[mm].

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.475-483
• /
• 2015

We propose a numerical scheme to simulate the time-domain echo signals at tracking radar for a realistic scenario where an EAD (expendable active decoy) and an airborne target are both in dynamic states. On various scenarios where the target takes different maneuvers, the trajectories of the EAD ejected from the target are accurately calculated by solving 6-DOF (Degree-of-Freedom) equations of the motion for the EAD. At each sampling time of the echo signal, the locations of the EAD and the target are assumed to be fixed. Thus, the echo power from the EAD can be simply calculated by using the Friis transmission formula. The returned power from the target can be computed based on the pre-calculated scattering matrix of the target. In this paper, an IPO (iterative physical optics) method is used to construct the scattering matrix database of the target. The sinc function-interpolation formulation (sampling theorem) is applied to compute the scattering at any incidence angle from the database. A simulator is developed based on the proposed scheme to estimate the echo signals, which can consider the movement of the airborne target and EAD, also the scattering of the target and the RF specifications of the EAD. For applications, we consider the detection probability of the target in the presence of the EAD based on Monte Carlo simulation.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.242-250
• /
• 2004

This paper describes the detection method of wire-like obstacles using millimeter-wave radar system. Passive sensor like CCD camera can be used for the detection of high power electric cables on the hills or mountains and it can give very good quality of obstacle target information. But this system is very limited to use by bad weather condition. The detection capability for different diameters of wire targets using millimeter radar system have been accomplished. To simulate the target on the moving helicopter, rotating targets are used with fixed radar system. In the experiment 11mm, 16mm and 22mm diameter of wires have been detected in single, two and three wires in one position. The detected signal from single wire was very clear on gray level image. Three wires placed very closely together could be recognized in range, cross range image plane. For two and three wires, blur effect due to mutual scattering effect is observed.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.321-334
• /
• 2021

A fixed reflectivity-rainfall relationship approach, such as the Marshall-Palmer relationship, for an entire year and different seasons, can be problematic in cases where the relationship varies spatially and temporally throughout a region. From this perspective, this study explores the use of long-term radar reflectivity for South Korea to obtain a nationwide calibrated Z-R relationship and the associated uncertainties within a Bayesian inference framework. A calibrated spatially structured pattern in the parameters exists, particularly for the wet season and parameter for the dry season. A pronounced region of high values during the wet and dry seasons may be partially associated with storm movements in that season. Overall, the radar rainfall fields based on the proposed modeling procedure are similar to the observed rainfall fields. In contrast, the radar rainfall fields obtained from the existing Marshall-Palmer relationship show a systematic underestimation. In the event of high impact weather, it is expected that the value of national radar resources can be improved by establishing an active watershed-level hydrological analysis system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.545-556
• /
• 2016

JPDAF is a method of updating target's state estimation by using posterior probability that measurements are originated from existing target in multi-target tracking. In this paper, we propose a multi-target tracking algorithm for falling cluster bombs separated from a mother bomb based on JPDAS method which is obtained by applying fixed-interval smoothing technique to JPDAF. The performance of JPDAF and JPDAS multi-target tracking algorithm is compared by observing the average of the difference between targets' state estimations obtained from 100 independent executions of two algorithms and targets' true states. Based on this, results of simulations for a radar tracking problem that show proposed JPDAS has better tracking performance than JPDAF is presented.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.507-514
• /
• 2019

Federal communications commissions (FCC) has announced the first set of rules for 3.5 GHz (3,550 - 3,700 MHz) band used Navy radar and fixed satellite service (FSS) earth stations as primary service to sharing for citizen broadband radio service (CBRS) enable development of relatively low powered network technologies like small cells. Since CBRS sharing technique based on the 3-tiered spectrum access system (SAS) is able to protect the higher tiered users from harmful interference from lower tiered users, it has been considered actively to be introduced in Korea. However, 3.5 GHz band had been already allocated to the 5G services in Korea, the sharing studies have been carried out for 3,700 - 5,000 MHz, As the result, the 3.8 GHz (3,800 - 3,900 MHz) band used for only FSS system is able to be sharing, and an introduction of CBRS has been proposed in Korea by analyzing the interference to the FSS earth stations.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1171-1173
• /
• 2003

There are two datasets to estimate the area-mean and time-mean precipitation rate. For one, an array of surface rain gauges represents a series of rods that have to the time axis of the volume. And another data is that of a remote sensing make periodic overpasses at a fixed interval such as radar. The problem of optimally combining data from surface rain gauge data and remote sensed data is considered. In order to combining remote sensed data with Automatic Weather Station (AWS), we use optimal weighting method, which is similar to the method of [2]. They had suggested optimal weights that minimized value of the mean square error. In this paper, optimal weight is evaluated for the cases such as Changma, summer Monsoon, Typhoon and orographic rain.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.305-312
• /
• 2021

There is a gradual increase in the need for energy charging in marine environments because of energy limitations experienced by electric ships and marine robots. Buoys are considered potential energy charging systems, but there are several challenges, which include the need to maintain a fixed position and avoid hazards, dock with ships and robots in order to charge them, be robust to actions by birds, ships, and robots. To solve these problems, this study proposes a smart buoy robot that has multiple thrusters, multiple docking and charging parts, a bird spike, a radar reflector, a light, a camera, and an anchor, and its mechanism is developed. To verify the performance of the smart buoy robot, the position control under disturbance due to wave currents and functional tests such as docking, charging, lighting, and anchoring are performed. Experimental results show that the smart buoy robot can operate under disturbances and is functionally effective. Therefore, the smart buoy robot is suitable as an energy charging system and has potential in realistic applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.91-96
• /
• 2018

In this paper, dual axes waveguide rotary joint, which operates at high power and has low loss characteristic, is designed and fabricated for a Ka-band millimeter-wave small radar. Its electrical performance is verified through the S-parameter at room temperature, high power and operation temperature test. Rotary joint functionally consists of the mode converter transforming rectangular waveguide into circular waveguide and the choke at the rotation part. At the configuration design, linking a fixed transmitter to an antenna rotating dual axes electrically for minimum loss and light weight body are considered. In Fc(center frequency)${\pm}500MHz$, the designed rotary joint has VSWR 1.5:1 below return loss, -2.0 dB above insertion loss. It is found that rotary joint characteristics is similar to design results.