• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.271-282
• /
• 1982

The browning development, mainly through the Maillard reaction, occurring in the dried fish meat products during storage causes reduction of the nutritional value due to the loss of the essential amino acid such as available lysine as well as off -flavor resulting in the deterioration of the food quality thus shortening the shelflife. In the work, the changes in the amount of available lysine, extractable nitrogenous compounds (nonprotein-N, amino-N, trimethylamine oxide, trimethylamine, and free lysine) and development of browning were measured to assess the relationship between the shelflife and the quality loss in dried filefish under the steady state conditions (35,45, and $55^{\circ}C;a_{w}'s$ of 0.44 0.52, 0.65 and 0.75 at each temperature) and fluctuating temperature condition of $35/55^{\circ}C$ will. alternating 7 day periods at each water activity. The results indicated that the amount of available lysine and extractable nitrogenous compounds except TMA decreased rapidly with increasing temperatures and water activities while the rate of available lysine and extractable nitrogenous compounds must be involved in the initial stage of brown pigment formation. The available lysine loss of the dried filefish products stored under the fluctuating temperature conditions was greater than that stored under its fixed mean temperature, $45^{\circ}C$. The activation energies for lysine loss obtained from the Arrhenius plot ranged 6.9 to 4.4 Kcal/mol and $Q_{10}$ values at $40^{\circ}C$ were 1.4 to 1.2. The values for browning were 15.7 to 14.4 Kcal/mol and 2.2 to 2.0 respectively. Shelf-life, defined as the time to reach 0.15 O. D./g solid or the limit of off-color deterioration by browning reaction, was extented longer than the halflife of Iysine loss, actually corresponding $75\%$ loss of available lysine. This suggested that the halflife of lysine loss might not be adequate to assess the shelf-life of the food system with high potential of protein, nonproteinous nitrogen compounds, and lipids.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.221-226
• /
• 2006

This study is about backwash condition and membrane fouling at continuous filtration process in ballast water treatment. Displayed result that handle particle contaminant and hydrospace organism included a number of ballast that is happened in ship using automatic back washing filter. Reason that removes first contaminant that is included in number of ballast is that heighten processing effect of after processing process of the filter. Another advantage is to drop off the solids with controlling revolution of drum screen in pretreatment filtration process. The capacity of pilot plant was $10m^3/h$. The result of the test, Backwash cycle time and duration time and a signification effect on the efficiency of system and backwash Backwash duration time was determined to be fixed in 6 seconds of the system with more than 95% removal rate, It needed 1hour backwash frequency. Filtration system removal aquatic organism over $70{\mu}m$ in ballast water. This study shows that the filtration treatment system has a potential for the treatment of ballast water.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Journal of Broadcast Engineering
• /
• v.20 no.3
• /
• pp.388-397
• /
• 2015

High Efficiency Video Coding (HEVC)/H.265 is a new video coding standard which is known as high compression ratio compared to the previous standard, Advanced Video Coding (AVC)/H.264. Due to achievement of high efficiency, HEVC sacrifices the time complexity. To apply HEVC to the market applications, one of the key requirements is the fast encoding. To achieve the fast encoding, exploiting thread-level parallelism is widely chosen mechanism since multi-threading is commonly supported based on the multi-core computer architecture. In this paper, we implement both the Tile-level parallelism and the Frame-level parallelism for HEVC encoding on multi-core platform. Based on the implementation, we present two approaches in combining the Tile-level parallelism with Frame-level parallelism. The first approach creates the fixed number of tile per frame while the second approach creates the number of tile per frame adaptively according to the number of frame in parallel and the number of available worker threads. Experimental results show that both improves the parallel scalability compared to the one that use only tile-level parallelism and the second approach achieves good trade-off between parallel scalability and coding efficiency for both Full-HD (1080 x 1920) and 4K UHD (3840 x 2160) sequences.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.11a
• /
• pp.104-105
• /
• 2012

The temperature dependence of the effective magnetic anisotropy constant K(T) of ferrite nanoparticles is obtained based on the measurements of SQUID magnetometry. For this end, a very simple but intuitive and direct method for determining the temperature dependence of anisotropy constant K(T) in nanoparticles is introduced in this study. The anisotropy constant at a given temperature is determined by associating the particle size distribution f(r) with the anisotropy energy barrier distribution $f_A(T)$. In order to estimate the particle size distribution f(r), the first quadrant part of the hysteresis loop is fitted to the classical Langevin function weight-averaged with the log?normal distribution, slightly modified from the original Chantrell's distribution function. In order to get an anisotropy energy barrier distribution $f_A(T)$, the temperature dependence of magnetization decay $M_{TD}$ of the sample is measured. For this measurement, the sample is cooled from room temperature to 5 K in a magnetic field of 100 G. Then the applied field is turned off and the remanent magnetization is measured on stepwise increasing the temperature. And the energy barrier distribution $f_A(T)$ is obtained by differentiating the magnetization decay curve at any temperature. It decreases with increasing temperature and finally vanishes when all the particles in the sample are unblocked. As a next step, a relation between r and $T_B$ is determined from the particle size distribution f(r) and the anisotropy energy barrier distribution $f_A(T)$. Under the simple assumption that the superparamagnetic fraction of cumulative area in particle size distribution at a temperature is equal to the fraction of anisotropy energy barrier overcome at that temperature in the anisotropy energy barrier distribution, we can get a relation between r and $T_B$, from which the temperature dependence of the magnetic anisotropy constant was determined, as is represented in the inset of Fig. 1. Substituting the values of r and $T_B$ into the $N{\acute{e}}el$-Arrhenius equation with the attempt time fixed to $10^{-9}s$ and measuring time being 100 s which is suitable for conventional magnetic measurement, the anisotropy constant K(T) is estimated as a function of temperature (Fig. 1). As an example, the resultant effective magnetic anisotropy constant K(T) of manganese ferrite decreases with increasing temperature from $8.5{\times}10^4J/m^3$ at 5 K to $0.35{\times}10^4J/m^3$ at 125 K. The reported value for K in the literatures is $0.25{\times}10^4J/m^3$. The anisotropy constant at low temperature region is far more than one order of magnitude larger than that at 125 K, indicative of the effects of inter?particle interaction, which is more pronounced for smaller particles.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.121-138
• /
• 2011

More affordable and available cutting-edge technologies (e.g., wireless vehicle communication) are regarded as a possible alternative to the fixed infrastructure-based traffic information system requiring the expensive infrastructure investments and mostly implemented in the uninterrupted freeway network with limited spatial system expansion. This paper develops an advanced decentralized traveler information System (ATIS) using vehicle-to-vehicle (V2V) communication system whose performance (drivers' travel time savings) are enhanced by three complementary functions (autonomous automatic incident detection algorithm, reliable sample size function, and driver behavior model) and evaluates it in the typical $6{\times}6$ urban grid network with non-recurrent traffic state (traffic incident) with the varying key parameters (traffic flow, communication radio range, and penetration ratio), employing the off-the-shelf microscopic simulation model (VISSIM) under the ideal vehicle communication environment. Simulation outputs indicate that as the three key parameters are increased more participating vehicles are involved for traffic data propagation in the less communication groups at the faster data dissemination speed. Also, participating vehicles saved their travel time by dynamically updating the up-to-date traffic states and searching for the new route. Focusing on the travel time difference of (instant) re-routing vehicles, lower traffic flow cases saved more time than higher traffic flow ones. This is because a relatively small number of vehicles in 300vph case re-route during the most system-efficient time period (the early time of the traffic incident) but more vehicles in 514vph case re-route during less system-efficient time period, even after the incident is resolved. Also, normally re-routings on the network-entering links saved more travel time than any other places inside the network except the case where the direct effect of traffic incident triggers vehicle re-routings during the effective incident time period and the location and direction of the incident link determines the spatial distribution of re-routing vehicles.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.6
• /
• pp.35-54
• /
• 2021

This study examines the characteristics of CBS's Kim Hyun-Jung's News Show(hearafter News Show) and the change to transmedia. The distinguishing characteristics of News Show compared to radio-based current affairs programs are as follows. First, despite its time limit, it adopts the form of investigative reports or investigative documentaries to uncover the truth of the events through 'Detective Son Su-Ho', etc. Second, News show's interviews have avoided biased stance in the reporting of minority issues by interviewing the affected parties anonymously including people involved in incidents and accidents, bereaved families, and other victims. News Show has been producing a transmedia content called 'That Honey Show' (a show that reads comments as fun as honey) since November 2018. 'That Honey Show' is broadcast in real time on YouTube right after the News Show radio broadcast ends. As a form of spin-off content, 'That Honey Show' breaks down the boundaries among staff, MCs, and guests, as well as shifting roles by using 'vice characters'. The female host, Kim conducts interviews with the main characters related to various issues and extends the fixed identity of current affairs shows to the everyday politics and cultural realms. Thus she draws active participation and responses audience. This paper analyzes two representative broadcast cases of 'That Honey Show'-first, the case of resistance and activity of the BTS fandom ARMY in the US presidential election, and, second, the case of reporting on the Nth room incident. This analysis considers the critical participation of digital citizens and the effect of fostering a sense of community in the current affairs show in the transmedia era.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.52-58
• /
• 2009

If a moving target has a linear characteristics, the Kalman filter can estimate relatively accurate the location of a target, but this performance depends on how the dynamic status characteristics of the target is accurately modeled. In many practical problems of tracking a maneuvering target, a simple kinematic model can fairly accurately describe the target dynamics for a wide class of maneuvers. However, since the target can exhibit a wide range of dynamic characteristics, no fixed SKF(Simple Kalman filter) can be matched to estimate, to the required accuracy, the states of the target for every specific maneuver. In this paper, a new AKF(Active Kalman filter) is proposed to solve this problem The process noise covariance level of the Kalman filter is adjusted at each time step according to the study result which uses the neural network algorithm. It is demonstrated by means of a computer simulation that the tracking capability of the proposed AKF(Active Kalman filter) is better than that of the SKF(Simple Kalman Filter).

• ALGAE
• /
• v.20 no.3
• /
• pp.207-216
• /
• 2005

Myrionecta rubra, a mixotrophic ciliate, is a cosmopolitan red tide species which is commonly found in neritic and estuarine waters. M. rubra had long been listed as an “nculturable protist”until 2 different laboratory strains were finally established in 2 research groups at the beginning of this century, enabling us to perform initiative investigation into various aspect of the live M. rubra strains (Gustafson et al. 2000; Yih et al. 2004b; Johnson and Stoecker 2005). Field sampling was carried out on high tide at 2 fixed stations around Kunsan Inner Harbor (St.1 near the Estuarine Weir and St.2 off Kunsan Ferry Station) every other day for 4 months from mid-February 2004 to understand detailed figure of the recurrent spring blooms of M. rubra following the onset of the water gates operation of the Keum River Estuarine Weir on August 1994. With its maximum abundance of 272 cells mL$^{-1}$ in St.1, fluctuation pattern of the M. rubra population at the 2 stations was strikingly similar. Notable growth of M. rubra population started on late April, to cause M. rubra red tides during one month from mid-May in which “xceptionally low salinity days”without its red tide were intermittently inserted. High abundance of M. rubra over 50 cells mL$^{-1}$ was recorded at samples with their water temperature and salinity higher than 15${^{\circ}C}$ and 4.0 psu, respectively. During pre-bloom period when salinity fluctuation is moderate and the water temperature is cooler than 15°C, Skeletonema costatum, a chain-forming centric diatom, was most dominant. Cyanobacterial species such as Aphanizomenon flos-aquae and Phormidium sp. replaced other dominant phytoplankters on the days with “xceptionally low salinity”even during the main blooming period of M. rubra. To summarize, M. rubra could form spring blooms in Keum River Estuary when the level of salinity fluctuation was more severe than that for the dominant diatom Skeletonema costatum and milder than that for the predominance by freshwater cyanobacteria. Therefore, optimal control of the scale and frequency of freshwater discharges might lead us to partially modify the fluctuation pattern of M. rubra populations as well as the period of spring blooms by M. rubra in Keum River Estuary. Sampling time interval of 2 days for the present study or daily sampling was concluded to be minimally required for the detailed exploration into the spring blooms by M. rubra populations in estuaries with weirs like Keum River Estuary.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.590-597
• /
• 1985

A recursive geometric adaptive control method to compensate for machining straightness error in the finished surface due to tool deflection and guideway error generated by end milling process is developed. The relationship between the tool deflection and the feedrate is modeled by a modified Taylor's tool life equation. Without a priori knowledge on the variations off cutting parameters, time varying parameters are then estimated by an exponentially windowed recursive least squares method with only post-process measurements of the straightness error. The location error is controlled by shifting the milling bed in the direction perpendicular to the finished surface and adding a certain amount of feedrate with respect to the tool deflection model before cutting. The waviness error is compensated by adjusting the feedrate during machining. Experimental results show that location error is controlled within a range of fixturing error of the bed on the guideway and that about 60% reduction in the waviness error can be achieved within a few steps of parameter adaption under wide operating ranges of cutting conditions even if the parameters do not converge to fixed values.