• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.75-81
• /
• 2016

By using simulation, fixed location production method and flow production method have been compared to improve the productivity of deckhouse preceding outfitting process. In this paper, we analyze that the suggested flow production system instead of fixed location production can improve productivity. In current preceding outfit production system which adopts fixed location production, where a block occupies an area and does not move until the work finishes. On the other hand, in improved flow production system, the block moves instead of workers and equipment. Though the output of two systems are almost the same when we did not consider the moving time and waiting time of blocks, the flow production will be better when the variability of task time will be reduced.

• Journal of Korean Institute of Industrial Engineers
• /
• v.10 no.1
• /
• pp.11-16
• /
• 1984

An economic model is developed for determining optimal locations of screening inspection stations in a multistage production system. The effect of screening inspection on the production rate is explicitly considered, and a fixed cost for maintaining an inspection station is assumed. The product is allowed to have multiple defects, each of which may be inspected at any inspection station after the defect-generating operation. The problem is formulated as a mixed 0-1 linear program which offers the advantage of versatility in handling various system constraints.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1225-1232
• /
• 2023

The ¹⁸⁰W is the lightest isotope of Tungsten with small abundance ratio. It is slightly radioactive (α decay), with an extremely long half-life. Its separation is possible by non-conventional single withdrawal cascades. The ¹⁸⁰W is used in radioisotopes production and study of metals through gamma-ray spectroscopy. In this paper, single withdrawal cascade model is developed to evaluate multicomponent separation in non-conventional transient cascades, and available experimental results are used for validation. Numerical studies for separation of ¹⁸⁰W in a transient single withdrawal cascade are performed. Parameters affecting the separation and equilibrium time of cascade such as number of stages, cascade arrangements, feed location and flow rate for a fixed number of gas centrifuges (GC) are investigated. The Salp Swarm Algorithm (SSA) as a bio-inspired optimization algorithm is applied as a novel method to minimize the feed consumption to obtain desired concentration in the collection tank. Examining different cascade arrangements, it is observed in arrangements with more stages, the separation is further efficient. Based on the obtained results, with increasing feed flow rate, for fixed product concentration, the cascade equilibrium time decreases. Also, it is shown while the feed location is the farthest stage from the collection tank, the separation and cascade equilibrium time are well-organized. Finally, using SSA optimal parameters of the cascade is calculated, and optimal arrangement to produce 5 gr of ¹⁸⁰W with 90% concentration in the tank, is proposed.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.39-45
• /
• 2006

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences overall operating condition of blast furnace such as gas flow, chemical reactions and temperature. because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process. In this model, cohesive zone is changed by solid temperature range, FVM is used for numerical simulation. To find location of cohesive zone whole calculation procedure is iterated Until cohesive zone is converged. Through this approach, shape of cohesive zone, velocity, composition and temperature within the furnace are predicted by model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1634-1640
• /
• 2012

The objective of this study was to compare pork characteristics and to determine consumer acceptability of pork chops from antibiotic free Yorkshire crossbreds sired by Berkshire (BY), Large Black (LBY), Tamworth (TY) or Yorkshire (YY) boars and reared in hoop houses. The experiments were conducted at the North Carolina Agricultural and Technical State University (NCA&TSU) Farm in Greensboro, NC and the Cherry Research Station Center for Environmental Farming Systems (CEFS) Alternative Swine Unit in Goldsboro, NC (source of antibiotic free Yorkshire sows used at both places). Twenty-four sows were artificially inseminated at each location in each of three trials. Litters were weaned at 4 wks old, and reared within deep-bedded outdoor hoop houses. To compare pork characteristics, 104 randomly selected animals were harvested at a USDA-inspected abattoir at approximately 200 d of age. Variables measured included pH, color score, $L^*$, $a^*$, $b^*$, marbling score, drip loss, hot carcass weight, backfat thickness (BF), loin muscle area (LMA), and slice shear force. Sensory panel tests were also conducted at two time periods. The data was analyzed with GLM in SAS 9.01 including location, trial, and sire breed as fixed effects. Backfat thickness, LMA, color score and $a^*$ were different among breeding groups (p<0.05). The LBY pigs had thicker backfat and smaller LMA than the other breed types. The TY and YY had less backfat than all other breed groups. Color score was lower for YY than BY and LBY but intermediate for TY. The $a^*$ was lower for TY than other breeds except LBY which was intermediate. For one sensory panel test, YY pork was more preferred overall as well as for juiciness and texture compared to BY and LBY (p<0.05), but no impact of breed type was noted for the other test, with values similar for BY, LBY, TY and YY pork. This information may help small farmers make decisions about breed types to use for outdoor production.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.761-782
• /
• 2006

Public concern about potential environmental risks of agricultural business for the livestock production and processing is increasing. However, due to differences in general industry structural characteristics, such as farm production and waste management practices, the effect of environmental policies may differ from species to species as well as across size categories. I hypothesize that additionally the Hog subsector may be more responsive to (or a greater driver of) a changing environmental policy environment than the beef cattle subsector. As a result, I expect to see more evidence of sensitivity in the environmental policy milieu from hog-operation stocking and location decisions than with the beef cattle industry. The written stringency may not effective, instead state's willingness to enforce has directed and regulated. However, in presence of rapid structural change, just like hog, industry location is affected by state regulation. The environmental compliance cost may be a small portion of industry total cost and fixed cost of beef industry makes for them to take into account environmental compliance for their decision location making. The special movements of flog industry have chance to minimize the cost of the operation and they willing to locate less stringent place.

• Applied Microscopy
• /
• v.3 no.1
• /
• pp.29-38
• /
• 1973

Introduction. The human cutaneous scars manifest themselves many ways in different types according to the factors such as the age, sex, race of the patient as well as the location,. kind and heal ing process of the wound. Among the scars it is quiet difficult to verify the clinical course of the hypertrophic or keloidal scars from the true keloids. However, clinical observations indicate that stress, either mechanical or in the forms of chronic infections, can induce a functional change in the fibroblasts causing an excessive production of collagenous matrix. In this study, we preliminary attempt to justify any difference of the cellular structure between keloids and hypertrophic scars by using electron microscope. Material and Methods. A total of 23 cases: 2 scars, 2 hypertrophic scars and 19 keloids are examined. Immediately, the biopsy tissue was fixed in 10% neutral formalin and 4% glutaraldehyde solution in phosphate buffer for 4 hours, post fixed in 1 % osmium tetraoxide for two hours, dehydrated with graded alcohol, and embedded in Epon 812. Thick sections were stained with hematoxylin eosin, periodic acid-Schiff(PAS) and Van Gieson stain. Thin sections were cut and uranyle acetate, lead citratestain and examined with the electron microscope. Result. The morphologic features of keloid showed thick, homogenously eosinophilic bands of collagen and numberous large active fibroblasts. The hypertrophic scar and soft scar are more cellular than keloid and composed thinner collagenous fiber. For this paper in the etiology of keloids can not as be defined, but and interesting keloidal tissue fibroblast showed irregular nucleus with irregular shape dense bodies and fibril materials contained in to the cytoplasm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3262-3271
• /
• 1996

Flow patterns were measured in a shrouded centrifugal impeller. The flow rate in measurements was fixed at the value corresponding to a nearly zero incidence at the blade inlet. By using a single slanted hot-wire probe and a Kiel probe mounted on the impeller hub disk, the 3-D relative velocities and the rotary stagnation pressures were measured in seven circumferential planes from the inlet to the outlet of impeller rotating at 700 rpm, and the static pressure distribution along flow passage and the slip factor at impeller outlet were calculated from the measured values. From these measured data, the primary and secondary flows, the wake production and the static pressure rise in the impeller passage were investigated. Furthermore, the secondary flow patterns and the wake's location in this impeller passage were compared with those of the unshrouded impeller.

• Journal of the Korean Society of Combustion
• /
• v.14 no.4
• /
• pp.1-6
• /
• 2009

Analysis of the internal state of the blast furnace is necessary to predict and to control the operating conditions. Especially, it is important to develop models of the blast furnace to predict the cohesive zone because shape of the cohesive zone influences overall operating conditions of blast furnace such as gas flow, chemical reactions and temperature. Because many previous blast furnace models have assumed cohesive zone to be fixed, it was not possible to evaluate the shape change of cohesive zone in relation with operating conditions such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace processes. In this model, cohesive zone is determined by the solid temperature. Finite volume method is employed for numerical simulation. To find location of the cohesive zone, entire calculation procedure is iterated until converged. Through this approach, shape of the cohesive zone, velocity and temperature within the furnace are predicted from the model.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1393-1404
• /
• 1995

For the factory automation(FA) of production or assembly lines, computer vision techniques have been widely used for the recognition and position-control of objects. In this application, it is very important to analyze characteristic features of each object and to find an efficient matching algorithm using the selected features. If the object has regular or homogeneous patterns, the problem is relatively simple. However, If the object is shifted or rotated, and if the depth of the input visual system is not fixed, the problem becomes very complicated. Also, in order to understand and recognize objects with concentric noise patterns, it is more effective to use feature-information represented in polar coordinates than in cartesian coordinates. In this paper, an algorithm for the recognition of objects with concentric circular noise-patterns is proposed. And position-conrtol information is calculated with the matching result. First, a filtering algorithm for eliminating concentric noise patterns is proposed to obtain concentric-feature patterns. Then a shift, rotation and scale invariant alogrithm is proposed for the recognition and position-control of objects uusing invariant feature information. Experimental results indicate the effectiveness of the proposed alogrithm.