• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2012

This paper is the study on the development of a torque precision measuring system using the curve fitting algorithm. This system can be divided into the hardware part and the software part. The hardware part consists of the main base board, the DAQ(Data Aquisition) board and Calibration parts. The software part consists of the software filter module and the curve fitting algorithm module. We have tested the torque transducer including the strain gauge for 200 Nm range and have analyzed the data acquired with the curve fitting algorithm by using this system. The DAQ board converts the electric signal induced by the transducer to the digital value precisely by using the shunt calibration procedure. The main board including the curve fitting algorithm calculates the exact digital torque value by using the digital value from the DAQ board. In this study, we confirmed that the result of the appropriate high-order power-series polynomial function is more accurate than the result of the low-order power-series polynomial through the system.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.451-458
• /
• 2013

In this paper, we have developed an intellectual sizing and fitting system for bike user. In order to prevent the disease, we should adjust the bike's frame and select several components in the body size. Then it propose an extractions algorithm of avatar imagination with the cromakey method and realize the sizing and fitting.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1820-1825
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed features from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.530-538
• /
• 2006

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed features from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.202-204
• /
• 2006

A new method is presented to design RF filters without the Similarity Transform of their coupling coefficient matrix as circuit parameters which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order Coaxial Lowpass filter and an 8th order dual-mode elliptic integral function response filter are taken as an example to validate the proposed method.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.415-418
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed feature from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.183-191
• /
• 2004

This paper deals with smooth curve fitting of data corrupt by noise. Most research efforts have been concentrated on employing the smoothness penalty function with the estimation of its optimal parameter in order to avoid the 'overfilling and underfitting' dilemma in noisy data fitting problems. Our approach, called DBSF(Differentiation-Based Smooth Fitting), is different from the above-mentioned method. The main idea is that optimal functions approximately estimating the derivative of noisy curve data are generated first using genetic programming, and then their integral values are evaluated and used to recover the original curve form. To show the effectiveness of this approach, DBSP is demonstrated by presenting two illustrative examples and the application of estimating the principal dimensions of bulk cargo ships in the conceptual design stage.

• Fashion & Textile Research Journal
• /
• v.2 no.2
• /
• pp.138-145
• /
• 2000

The problem of fitting of children's clothing was researched through survey papers. The survey subjects were the mothers of elementary school students (grade 1 6) and the appropriateness of size, satisfaction with size, and fittings were asked. The survey area was divided into urban and rural areas. The following is the result: The children's clothing was mostly purchased in stores that carry lower-middle price range. The elements considered upon purchase were in the order of price, size, color and patterns. The frequency of purchase is 2 outfits a year, and the highest rate purchase was shown during the change of seasons. The size was picked through trying on the garment. The preferred indication of size was the one marked according to body size. The most popular size upon purchase was one size bigger than the proper fitting size. Mothers want their children to be able to wear one outfit for two years and actually children were able to wear them for two years. The highest degree of satisfaction upon proper fitting was bust girth and shoulder breath. The most frequent reason for a new purchase is the length. The most frequent dissatisfaction is the way buttons are sowed on.

• Journal of applied mathematics & informatics
• /
• v.7 no.3
• /
• pp.983-994
• /
• 2000

We consider the problem of determining the circle of best fit to a set of data points in the plane. In [1] and [2] several algorithms already have been given for fitting a circle in least squares sense of minimizing the geometric distances to the given data points. In this paper we present another new descent algorithm which computes a parametric represented circle in order to minimize the sum of the squares of the distances to the given points. For any choice of starting values our algorithm has the advantage of ensuring convergence to a local minimum. Numerical examples are given.

• Journal of Korean Clinical Health Science
• /
• v.4 no.4
• /
• pp.662-670
• /
• 2016

Purpose. Because of a recent increase in use of soft contact lens at younger ages, in the present study, the correlation between corneal eccentricity and radius of curvature and fitting types of contact lens was investigated. Methods. The study evaluated the fitting status of targets through lens centration, push-up test, dynamic lag test and static lag test of lenses usually worn by 49 men and women (98eyes) in their 20s to 30s who put on soft contact lenses. After evaluation, the subjects were classified into 3 categories by fitting status(steep, aligment and flat). The radius of corneal curvature in the naked eyes was measured by using keratometer. Moreover the corneal eccentricity in the nasal side, temporal side, superior side and inferior side was measured by using the device capable of measuring the corneal eccentricity. Results. The radius of corneal curvature and corneal eccentricity of soft lenses worn by subjects were higher in the order of steep fitting and flat fitting, and the higher average corneal curvature radius and corneal eccentricity is intend to be more steep fitting(p=0.051, p=0.052). The corneal eccentricity showed a tendency to nasal fitting type at the higher eccentricity and temporal fitting type at the smaller eccentricity, statistically significant difference was observed(p<0.05). The study showed there were low correlation that nasal and temporal side at steep fitting, superior side at normal fitting and 4side(nasal, temporal, superior, inferior) at flat fitting, therefore when the corneal eccentricity changed the radius of corneal curvature also changed. The corneal eccentricity and the radius of corneal curvature showed statistically significant difference at 4side and each fitting types(p<0.05). Conclusions. The results of this study, the fitting status, of wearer are based on radius of corneal curvature and corneal eccentricity, and if lens fitting would be done considering that, it seems to be useful in a soft contact lens prescription.