• Wind and Structures
• /
• v.38 no.5
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.330-341
• /
• 2016

This study suggested criterion for Petite-size and analyzed the body size and characteristics that were proper to manufacture clothing for Korean Petite-size women aged 18 to 34. It also analyzed size information about pattern making for Petite-size women through a comparison of the size and proportion of Petite-size with Regular-size. The criterion of Petite-size was decided in consideration of the distribution and perception of stature; subsequently, the stature range for Petite-size was defined as under 157.5cm. Body size and proportion of Petite-size were analyzed through calculating the mean from 25 to 75 percentiles of a Petite-size stature range. The Petite-size of this study was compared to KS Petite and total subjects through One way ANOVA. It was confirmed that the Petite-size of this study had body characteristics like KS Petite; however, Petite-size was larger in height and vertical length than KS Petite. The significant differences between Petite-size and Regular-size were identified in the same bust girth range, that required a revised calculation formula for pattern making that would be proper for Petite-size. It is expected that the Body size and proportion could be utilized as a reference for manufacturing or purchasing Petite-size clothing. The result of this study will contribute to enhance the fit satisfaction for Petite-size women aged 18 to 34.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.65-72
• /
• 2001

Power system stabilizer act efficiently to damp the electromechanical oscillations in interconnected power systems. This paper presents an algorithm for the optimal parameter selection of a power system stabilizer in two-area power systems with a series HVDC link. This method is one of the classical techniques by allocating properly pole-zero positions to fit as closely as desired the ideal phase lead between the voltage reference and the generator electrical power and by changing the gain to produce a necessary damping torque over the matched frequency range. Control of HVDC converter and inverter are used a constant current loop. Proper parameters of PI controllers are obtain based on the Root-locus technique in other to have sufficient speed and stability margin to cope with charging reference values and disturbance. The small signal stability arid transient stability studies using the PSS parameters obtained from this method show that a natural oscillation frequency of the studycase system is adequately damped. Also the simulation results using the HVDC converter and inverter parameters obtained from this proposed method show proper current control characteristics. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.25-36
• /
• 2001

Among the numerous factors contributing to implant failure, the most common are infection, failure of proper healing and overload. These factors may occur combined. Implant fractures are one of the complications resulting from overload. Implant fracture is not a common feature, but once it occurs it causes very unpleasant circumstances for the patient as well as for the practitioner. Only few studies have been reported regarding this subject. Thus, little is known about its solutions. It is important that analyzing reasons for implant fracture and finding appropriate solutions. Factors leading to implant fracture are design, material defects, nonpassive fit of prosthetic framework and biomechanical overload. Previous studies have reported that implant fractures ares associated with marginal bone loss and occur mostly in the posterior regions and that most patients showing parafunctional habits also have implant fracture. Abutment and gold screw loosening or fracture were also observed in some of the cases previous to implant fracture. Similar observations were seen in our hospital as well. The following cases will present implant fracture cases which have been successfully treated regarding function and biomechanics. This was achieved by means of using increased number of futures, increasing fixture diameter and establishing proper occlusion.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.13-20
• /
• 2015

Many automotive companies are endeavoring to improve the quality of resistance spot welding by updating body-in-white (BIW) production line with adaptive control spot welding system to compensate the process disturbances such as gap, electrode wear, oxidized surfaces, poor fit up and adhesive etc. Most of the commercial adaptive weld controllers require proper "Initial Welding Schedule" or "Reference weld" to achieve compensation in welding parameters during real time welding. In this study, the compensation of a commercial adaptive weld controller had been observed and analyzed thoroughly for various process disturbances to find optimal initial welding schedule. It was observed that 90 percent of the expulsion current in constant current control as reference welding schedule conferred the maximum button diameter in adaptive control welding. Finally, effects of each disturbance in combined field disturbances system with adaptive control had also been confirmed with the design of experiment (DOE) by minitab(R)16 for combined disturbances situation and suitability of optimum initial weld current had also established with real body part validation test.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.79-88
• /
• 2000

It is essential to build a high quality database in developing a UIS to enhance the administrative effectiveness of municipal governments. To secure such a high quality DB, a proper methodology of quality control should be established. It is imperative to have such a method fit UIS DB considering that the conventional method has mainly been focusing on the quality control of the digital layers itself. Therefore, this study have analyzed the city of Inchon's UIS DB to devise a proper method to categorize the types of errors and to identify major relevant items. Also, the magnitude and frequency of each error along with its major cause have been analyzed to propose a quality control procedure to minimize the errors

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.515-526
• /
• 2009

Pricing based on proper risk has been one of main issues in auto insurance. In this paper, we review how the techniques of pricing in auto insurance have been developed and suggest a better approach which meets the existing risk statistically by comparison. The generalized linear model (GLM) method is discussed for pricing with different distributions. With GLM approach, the distribution of error assumed plays an main role for the best fit corresponding to the characteristics of dependent variables. Tweedie distribution is considered as one of error distributions in addition to widely used Gamma and Poisson distribution. With these different types of error assumption for estimating the proper premium in auto insurance, various modeling approaches are possible. In this paper, various modeling approaches with different assumptions for estimating proper risk is discussed and also real example is given by assuming different.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1140-1142
• /
• 2003

Imagery and gridded data can be used as the sources of extracting important information and data layers in utilizing GIS. The existing metadata standard to distribute and to utilize the geographic information are mainly concentrated at the vector data and do not provide metadata components for imagery and gridded data. In this study, metadata components for imagery and gridded data have been investigated. Firstly, existing international metadata standards such as ISO and domestic standards of TTA have been analyzed. Based on th results, the draft metadata for imagery and gridded data have been proposed as the extensions of domestic metadata standard distribution. The draft metadata could contribute to build the basic standards to access and utilize proper imagery and gridded data fit to various application field, and this will be fundamental bases for activating GIS in public and private sectors.

• Journal of the Korean Society of Costume
• /
• v.54 no.3
• /
• pp.65-71
• /
• 2004

Surgical operating gowns are worn by doctors and nurses in operating theater to address dual function of preventing transfer microorganisms like bacteria and body fluids from the operating staffs to patients. and also from patients to staff. They must allow necessary mobility without rubbing and must resist tearing. These gown must be designed to fit a diversity of body shapes and sizes with a limited range of sizes as hospitals will stock limited quantities. Also they must proper in various operating situations. In order to suggest improving design features of surgical gowns, it has been done to analyze current situation of medical uniform manufacturing and wearing. Surgical gown were made with plain fabric of cotton 100% and had a little size system without sexual division. Many doctors were unsatisfied with surgical gown size and wearing comfort. Surgical operating gowns need continuos research for new material and design as surgical situation, and new sizing system.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.163-171
• /
• 2020

There are many differences in narrative delivery between common movies and Virtual Reality(VR) films due to their differences in the appreciation structure. In VR films, scene changes by cuts have hindered the immersion of the audience instead of promoting narrative delivery. There are a range of experiments on narratives and immersion to solve this issue in VR films. Floating Tent applies hand gestures and immersive effects found in game elements and does not disturb narrative delivery by setting proper spaces and employing a direction technique to enable the melting of narratives into the characteristics of the spaces. There are time limits to offsound and mission performance, and devices fit for apocalyptic spatial expressions are made through a program. One of measures for the increasingly growing interactive storytelling in VR films is effective immersion. In narrative delivery, it is important to consider spatial setting and immersion to enable active intervention into events for immersion rather than passive audience only supposed to watch characters' acting.