• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.445.1-445
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.158-158
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.213-213
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.29-30
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.729-738
• /
• 2009

Given the evolution of High-Temperature Gas-cooled Reactor(HTGR) designs, the source terms for licensing must be developed. There are three potential source terms: fission products, actinides in the fuel and tritium in the coolant. It is necessary to provide first an inventory of the source terms under normal operations. An analysis of source terms has yet to be performed for HTGRs. The previous code, which can estimate the inventory of the source terms for LWRs, cannot be used for HTGRs because the general data of a typical neutron cross-section and flux has not been developed. Thus, this paper uses a combination of the MCNP, ORIGEN, and MONTETEBURNS codes for an estimation of the source terms. A method in which the HTR-10 core is constructed using the unit lattice of a body-centered cubic is developed for core modeling. Based on this modeling method by MCNP, the generation of fission products, actinides and tritium with an increase in the burnup ratio is simulated. The model developed by MCNP appears feasible through a comparison with models developed in previous studies. Continuous fuel management is divided into five periods for the feeding and discharging of fuel pebbles. This discrete fuel management scheme is employed using the MONTEBURNS code. Finally, the work is investigated for 22 isotope fission products of nuclides, 22 actinides in the core, and tritium in the coolant. The activities are mainly distributed within the range of $10^{15}{\sim}10^{17}$ Bq in the equilibrium core of HTR-10. The results appear to be highly probable, and they would be informative when the spent fuel of HTGRs is taken into account. The tritium inventory in the primary coolant is also taken into account without a helium purification system. This article can lay a foundation for future work on analyses of source terms as a platform for safety assessment in HTGRs.

• 대한화학회지
• /
• 제45권4호
• /
• pp.304-311
• /
• 2001

경수로 사용후 핵 연료에 미량 함유되어 있는 핵분열생성물을 유도 결합 플라스마 원자방출분광법(ICP-AES)으로 분석하기 위하여 우라늄으로부터 학분열생성물을 추출 크로마토그래피로 분리, 회수하는 방법을 검토하였다. 우라늄 분리 분야에서 잘 알려져 있는 tri-n-butyl phosphate(TBP)를 추출제로 사용하여 몇 가지 Amberlite XAD 다공성 수지들에 대한 침윤능을 비교한 후 TPB침윤양이 가장 큰 Amberlite XAD-16을 지지체로 선택하였다. 사용후핵연료 용해용액과 화학조성이 유사한 모의 사용후핵연료 용해용액을 사용하여 TBP 침윤수지에 대한 핵분열생성물 원소들의 흡착거동을 조사하고, 분리에 미치는 여러 변수들을 최적화 하였다. Pd 및 Ru을 제외한 대부분의 핵분열생성물 원소들을 정밀도 3.1% 이하의 범위에서 정량적으로 회수할 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제42권2호
• /
• pp.114-129
• /
• 2017

Background: The purpose of this paper is to confirm the event timings and the magnitude of fission product aerosol release from the Fukushima accident. Over a few hundreds of technical papers have been published on the environmental impact of Fukushima Daiichi accident since the accident occurred on March 11, 2011. However, most of the research used reverse or inverse method based on the monitoring of activities in the remote places and only few papers attempted to estimate the release of fission products from individual reactor core or from individual spent fuel pool. Severe accident analysis code can be used to estimate the radioactive release from which reactor core and from which radionuclide the peaks in monitoring points can be generated. Materials and Methods: The basic material used for this study are the initial core inventory obtained from the report JAEA-Data/Code 2012-018 and the given accident scenarios provided by Japanese Government or Tokyo Electric Power Company (TEPCO) in official reports. In this research a forward method using severe accident progression code is used as it might be useful for justifying the results of reverse or inverse method or vice versa. Results and Discussion: The release timing and amounts to the environment are estimated for volatile radioactive fission products such as noble gases, cesium, iodine, and tellurium up to 184 hours (about 7.7 days) after earthquake occurs. The in-plant fission product behaviors and release characteristics to environment are estimated using the severe accident progression analysis code, MELCOR, for Fukushima Daiichi accident. These results are compared with other research results which are summarized in UNSCEAR 2013 Report and other technical papers. Also it may provide the physically based arguments for justifying or suspecting the rationale for the scenarios provided in open literature. Conclusion: The estimated results by MELCOR code simulation of this study indicate that the release amount of volatile fission products to environment from Units 1, 2, and 3 cores is well within the range estimated by the reverse or inverse method, which are summarized in UNSCEAR 2013 report. But this does not necessarily mean that these two approaches are consistent.

• 한국동물학회지
• /
• 제11권3호
• /
• pp.85-91
• /
• 1968

1963年에서 1967年에 걸쳐 서울地區의 人工放射能과 自然放射能을 全放射能의 測定과 放射性核種의 分析을 통하여 硏究하였다. 核分裂生成物의 濃度가 적을때는 \ulcorner은 半減期를 갖는 라듐이나 토리음의 崩壞生成物이 浮游塵의 大部分을 차지하고 있었으며 核分裂生成物에 依한 放射能은 試料 採取후 며칠 지나야 正確히 評價할수 있었다. 7次에 걸친 中共의 核實驗의 結果 두차례의 强放射能이 爆發후 30時間을 前後하여 서울地區에 나타났으며 이들은 1956年에서 1962年 사이에 美國과 蘇聯에서 행한 實驗과 比較할 때 높은 比放射能을 보였으나 持續時間은 아주 짧아서 1週內에 急激히 減少하였다. 이로 보아서 서울地區의 放射能汚染은 中共의 核實驗인 境遇 核實驗의 規模와 實驗高度 및 爆發前後의 氣象條件, 特히 高層對流圈의 제트氣流에 依해서 많은 影響을 받음을 알았다.

• Journal of Radiation Protection and Research
• /
• 제14권2호
• /
• pp.30-36
• /
• 1989

고리 1호기의 사용후 핵연료에 함유된 핵종중 핵임계도에 미치는 영향이 큰 22개 핵종에 대한 핵단면적 자료를 XLACS-II에 의해서 ENDF/B-IV로 부터 취해서 FISSLIB(51군 핵단면적 자료)를 만들었다. 그리고 AMPX 조직에 의해서 DLC-43/CSRL 자료로 부터 생산된 51군 핵단면적 자료와 함께 사용할 수 있도록 하였다. 한편 BNL-325와 FISSLIB을 비교하여 후자의 유용성을 확인하였다. 그리고 FISSLIB에 수록된 핵분열 생성물 핵종에 대한 핵군단면적을 기본 입력자료로 하여 무한 배열된 고리 1호기 사용후 핵연료봉에 대한 핵임계도 계산을 수행하였다. 그 결과 냉각기간에 따라 핵분열 생성물 핵종을 고려할 때의 핵임계도는 그것을 무시할 때보다 9-14%의 감소효과를 나타냈다.