• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.282-289
• /
• 2017

Background: The objective of this study was to report on the prevalence of musculoskeletal pain in lobstermen in the northeast USA. Methods: Crews were randomly selected from those licensed to fish in Maine and Massachusetts and followed prospectively. The survey used a Nordic Musculoskeletal Questionnaire format to characterize musculoskeletal disorders. Results: A total of 395 individuals participated. One half of the respondents reported low back pain. Back pain was attributed to or exacerbated by lobstering. Low back pain was prevalent among both captains and sternmen, while sternmen reported more hand/wrist pain than captains. Multiple locations for pain were common in individual participants. Conclusion: Equipment or technology to assist material handling should be a priority, as the body segments with high prevalence of pain (back, hand/wrists, shoulders, knees) are all affected by the repetitive and forceful handling of the lobster traps.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.16-22
• /
• 2003

The mechanical characteristics of newly recycled aggregate concrete on the basis of the proposed mix design model have been studied to develop the precast artificial fishing reefs. In the first task, the experimental test for the recycled aggregates taken from Jeju Island has been carried out to verify the material properties in terms of specific gravity, percentage of solids, absorption and abrasion of coarse aggregates. In the second task, the experimental parameters of newly recycled aggregate concrete are investigated to meet with the requirements of guidelines with respect to slump, unit weight, pH, ultrasonic velocity, void ratio, and compressive strength which are made of sea-shore sand ad slag cement. The natural aggregate and polypropylene fiber are added to newly recycled aggregate concrete to improve the compressive strength and quality. The optimal mix proportions for compressive strength are W/C=30％, S/a=15％, NA/G=50％ in porous concrete case, W/C=40％, S/a=45％ in plain concrete case, and W/C=40％, S/a-45％, PF=1.0kg/㎥ in fiber reinforced concrete case.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.4
• /
• pp.501-507
• /
• 2010

The ceramic contained paint was made to replace the lead sinker for gill-net with coated lead sinker. The ceramic contained paints were coated in various conditions on the lead sinker with 19g of weight and the optimal coating condition was studied. The adaptability of the coated lead sinker was checked through the anti durability test and fishing operation with gill-net. The case of "Main material 70 wt% + Urethane thinner 30 wt% (Main material 700 $m{\ell}$ + Thinner 300 $m{\ell}$)" showed the best in the coating characteristics depending on the combination ratio of the ceramic paint contained. The coated lead sinker dried at $100^{\circ}C$ inside oven was superior to the drying in the room temperature in its surface glossiness and anti durability and faster drying time than the one dried in normal temperature. The quadruple layers of coating on lead sinker with 4 times of dipping and drying application showed the super anti durability in the coating characteristics depending on the frequency of dipping. When press is applied to the coated lead sinker, the coated layer is not detached from the sinker. In addition, the coated lead sinker was not damaged or peeled at the fishing operation about 2 months in various depths within 50m and by the materials at the bottom (sand, stone and gravel stone) and it was in good condition.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.

• The Journal of Fisheries Business Administration
• /
• v.9 no.2
• /
• pp.59-89
• /
• 1978

The analyzed results of the actual state of stow net fishery based on the cost expended are as follows. According to the calculation of interests, the total cost of this fishery comes to ￦38,010,653 and in this account, the production cost comes to ￦35,477,198(93.3%), the material cost, 14,567,239(38.3%), the labour cost, 12,740,274(33.5%), the expenses, ￦8,169,685(21.5%), the commision and administration expenses, 2,533,455(6.7%). The expenses for this fishery are paid out as production costs, and the expenses for sale and administration expenses are the lowest of them, and the 93% of expenses are paid out as production costs. The ratio of cost element to 100% is as follow. The wages, 28.4%, fuel, 15.2%, repair, 11.6%, deprecation, 9.5%, fishing gear, 8.7%, ice, 6.1%, container(box for fish), 5.2% administration expenses, 5.2%, food, 3.5%, ship grar, 3.2%, public welfare, 1.7%, commision for sale, 1.5%, insurance for crew, 0.2%, taxes, 0.2%. This fishery is managed with the larger fishing boat than it was and so, it demands better crews with higher wages. In the former fishery, the search for fishing ground is very difficult with long navigation and great fuel consumption. when the weak fishing gears are used, the expenses for their repair and for their gears are greatly paid out. The unit costs of catches to each box come to ￦2.807(￦187 each kg). As the ratio of cost of sales comes to 86.7%and the ratio of interests comes to ￦5,850,812(13.3%), and so the net profit comes to 13.3% of total profits. According to above the ratio of cost of sales is shown as a universal validity, Asthe total expenses comes to 86.7% to the money on sales in the break-even point, the break-even point comes to ￦26,209,168 Accordingly for the profit control the account of production should be raised, and by the saving method of expenditure the break-even point should be brought down for the development of total profits.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.1
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.256-264
• /
• 2024

Small pelagic fish populations have long been exploited by various fishing gears in the Natuna Sea, and since the 1970s, purse seine exploitation has expanded to offshore fishing grounds. Various small pelagic fish species are exploited from these waters including spotted sardinella (Amblygaster sirm). This research was conducted for 22 months, from March 2019 to December 2020. The fish sample was taken from the purse seine fleet's catch in the fisheries management area (FMA) 711 Natuna Sea and Karimata Strait, which was brought to Pemangkat fishing port in the West Kalimantan Province, Indonesia. This paper aims to determine the exploitation status of spotted sardinella in the Natuna Sea as a recommendation material for management policies. The methods used in this analysis are estimated age, cohort, population parameters, and spawning potential ratio of spotted sardinella. The results show three primary cohorts of spotted sardinella in the Natuna Sea, with ages ranging from 9 months to 3.1 years and a maximum attainable age (longevity) of 4.3 years. The asymptotic value (L_∞) is 21.79 cmFL in length, with a growth rate (K) of 0.65 per year. The natural mortality rate (M) was 1.19, the total mortality rate (Z) was 2.19, and the fishing mortality rate (F) was 0.99. The exploitation rate (E) was 0.45 and the stock status was still in a sustainable condition. Therefore, the sardinella fisheries can be developed using a precautionary approach and focus on the ecosystem sustainability of FMA 711.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.24
• /
• pp.4-20
• /
• 2008

Stainless steel 304 or stainless steel 630 types using propeller shaft of a small ship or a FRP fishing boat generally restrain localization corrosion and abrasion damage occurrence to shaft bearing or grand packing contact. In general, the residual stress which remains after welding or heat treatment in material can cause the stress concentration or localization corrosion. In case of small ship, stainless steel such as STS304 has long been used for propeller shaft. Meanwhile, crew of small ship tend to reuse damaged propeller shaft after repair by welding and performing heat treatment to save cost. However, it was found that reused propeller shaft by repair often caused troubles in ship's operation. In this study, the basic guideline for maintenance and treatment of propeller shaft are investigated. From the results of investigation, remarkable deterioration of the material properties and corrosion resistance on the welded work part was observed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.269-275
• /
• 1981

The fishing hooks were tested for breaking and unbending due to plastic deformation of the material. Study of tensile test is not complicated, but has not even worked out fully enough, especially when the test specimen is subjected to plastic deformation. The fishing hook is subjected to unbending stress and the critical section is a Point which is furthest from the line of action of the forces. The dynamic force of fish during jerks depends on their speed of movement and body weight, the kinetic energy corresponding to it and also on the rlastic displacement of the rigging which absorb the energy. Six kinds of hook were tested by the dynamometer under tensile speed 290mm/min (subscript s) and 780mm/min (subscript f). According to their results, the breaking load(B: kg) can be induced with the formula $B={\alpha}wd^2+\beta$ where w(mm) is the distance between the barb base and the lower shank and d(mm) is diameter. The coefficients of the formula for the round hooks(R) and the angular hooks(A) are approximately as follows: $$R:\;\alpha_{s}=0.5,\;\beta_{s}=1.6,\;\alpha_{f}=0.4,\;\beta_{f}=1.4$$ $$A:\;\alpha_{s}=1.1,\;\beta_{s}=2.0,\;\alpha_{f}=1.0,\;\beta_{f}=0.9$$ The ratio of $B_{f}\;to\;B_{s}$ is corresponding to 0.8. The ratio of deformation(X) that is moved distance of barb base at break to the distance(H) between head base and barb base is about $50\%$. Further study should be carried out on the subject of impact and fatigue test under the same condition which is exerted force by the hooked fish.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.7 no.1
• /
• pp.57-78
• /
• 1970

The Korea inshore fishing boats are the size up to 30G.T., and their construction commonly employs the traditional wide wooden planking. Nevertheless, the hull forms have been developed with chine-type straight-framed sections which give developable surface party, but not on the whole: especially not on the whole portion of the hull are preferable for them. Considering many merits in the boat construction, the author, excluding cases of the FRP construction by hand lay-up or spray-up method and of the ferro-cement construction, finds out no reasons to depart from the chine-type hull forms of a developable surface in future development of their hull forms, too. In this report, the author proposed new designs of the developable hull surface for four typical boats forming the main structure of Korean inshore fishing fleets; 5G.T.-class multi-purpose boat, 10G.T.-class angling and longlining boat, 20G.T.-class drift and gill netters, and 27G.T.-class stow netters, and presented the tank test results on their propulsion resistance. The tank test had two purposes; one is to present the powering schedule of the new designs and the other to investigate the resistance characteristics of this kinds of boat in comparision with those of equivalent round-type boats at operational speed ranges. Between the both types of the boat no material differences in powering are expected. Hence, the author is confident of that saving in the construction cost of the developable hull over that of the round-type boat may result in considerable contribution to the over-all boat economy.