• 수산해양기술연구
• /
• 제56권2호
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

• 수산해양교육연구
• /
• 제29권2호
• /
• pp.570-580
• /
• 2017

In this study, we designed a fishing system to reproduce the underwater movement of the living Sword tip squid (Loligo edulis) used as bait in the red seabream long line fishery, and conducted the experiment of the fishing operation in 2 ways, i.e., a pole and line fishing method (fishermen) and a bait control fishing system used at fishing sites. Based on the catches in fishing operation, the experiment was conducted over a six times (2014 & 2015), and then 107 fishes were caught by the line fishing method while 57 fishes were caught by the bait control fishing system. The fishermen method actively controlled the speed of gear movement upward and downward while checking the reaction of red seabreams to the bite in the process which a jerk was transmitted to single line hook fishing gear manually. The bait control fishing system is a passive method which fishermen visually check only the movements at the end of fishing pole, enabled differentiation of bite reactions of red seabream during fishing operation. Thus, the difference between fishermen method and the bait control fishing system was found to about 53.3% in the catches. We confirmed the possibility of a site fishing operation based on the bait control fishing system designed newly as a result of this study. Improvement is in several areas for commercialization at the site. This fishing system is expected to be able to find wide-ranging applications as a new labor-saving method for the fishing red seabreams if it is applied to the fishing sites after aforesaid process.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.101-106
• /
• 2005

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

• 수산해양기술연구
• /
• 제60권2호
• /
• pp.152-160
• /
• 2024

We analyzed risk factors of coastal gillnet fishers during fishing process and considered work safety measures to reduce safety accidents during fishing using a UWB (ultra wideband) based positioning system. The static position accuracy of the UWB based positioning system was 45 cm. When entering a port, there is a risk of falling overboard. When casting a net, there was a risk of falling overboard due to being hit by fishing gear or guards, or getting caught in a buoy line or sinker line. When hauling a net, there is a risk of getting caught between fishing gear and net hauler, and the risk of musculoskeletal disorders due to repetitive work over a long period of time. Most safety accidents during work on fishing boats are blamed on human errors of the fisher and skipper, but safety accidents occur due to a mixture of mechanical and equipment factors, work and environmental factors, and management factors in addition to human errors. Therefore, the 4E were presented as countermeasures against the 4M, which are causes of safety accidents, and the proposed measures were used to identify risk factors for operation process, comply with work safety rules, and ensure the wearing of personal protective equipments. We need to reduce safety accidents during work by making it part of our daily routine. These research results can be used in the future for optimal placement of fishing gear and fishing nets in other coastal industries where safety accidents occur frequently.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.175-184
• /
• 2022

This study analyzed the allocation of the skipper's attention during fishing operation in the wheelhouse of a Korean coastal composite fishing vessel by using video observation. To summarize the results, the ratio of lookout, radar and GPS monitoring, which is essential for prevention of collision at sea, was significantly lower than that of other fishing operation due to the attention concentration on the work place during hauling line. In order to reduce exposure to risk of collisions due to concentration of attention to certain tasks such as line hauling, it is necessary to develop an alert system that can notify the approach of other ships or obstruction throughout the ship using information from radar or the automatic identification system. In addition, the order of attention allocation to devices and facilities obtained in this study is expected to be used as basic data for device or facility layout based on the principle of usage frequency in designing wheelhouse for coastal composite fishing vessels in the future.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• 수산해양기술연구
• /
• 제55권2호
• /
• pp.152-161
• /
• 2019

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper's work, escaping from transferring the responsibility of ship collision to the skipper completely.

• 수산해양기술연구
• /
• 제31권3호
• /
• pp.287-295
• /
• 1995

fishing boat is a specialized vessel which is intended to perform certain well defined tasks. Its size, deck-layout, carrying capacity and equipment are all related to its function in carrying out its planned operations. Therefore the process of fishing boat design is inherently combined with optimization of the design variables called the economic optimization criteria. Optimization then is a process in which minimum value of weight or cost is established through evaluation of consecutive designs in which one or more design parameters are varied. This paper is to study the basic-design of Stow-net fishing vessel in the Mok-Po region. The main task is developed the preliminary design model of engineering economic system in order to use optimization techniques from operation research the design problem needs to be expressed in terms of objective function and numerous constrains like : speed, fish hold capacity, fishing range, displacement and weight, ratio of main dimensions, etc. The objective function represents the criterion which is NPV such as the ratio of revene/cost. When using computers of limited capacity like P/C, the developed basic-design model of the economic optimization procedure must be simplified to V, Cb, L/B, Dv, Db and less than 15 constraint equations. The main conclusions of this study have attempted to show that economic considerations are essential in Stow-net fishing vessel basic design and operations, and that techno-economic evaluation is an important tool for the design of Stow-net fishing vessel in 69ton and 79ton.

• 수산해양교육연구
• /
• 제10권2호
• /
• pp.184-210
• /
• 1998

The set-net fishing is involved in the trap fishing method that intercepts the fishes migrating along the coast and induces them to be in the bag net stretched in advance. And this fishing also corresponds to the licensed fishing in fisheries law. Though its annual total production of around 50,000 to 70,000 M/T is less than in other fishery section, its price becomes higher because the fishes are sold in the live fish condition. Until recently, the set-net fishing is one of the preferred fisheries on account of its less operation expense and stably operating condition in a long term. In the meantime, the industrialization in Korea having been prospered along coastal area and the over fishing in terms of the powered and larger size fishing boat make the fishing ground environment worse yearly. In addition, its difficulty becomes more worse with issuing fishery product free import in July 1997; accordingly, the strategy for the set-net fishing through business rationalization should be considered. From the discussion of the sort of set-net, general present situation and operating actual state of set-net fishing, the improved methods for business rationalization in the present paper is proposed as follows: 1. to increase the fisheries resource through prevention of the marine contamination and purification of coastal area environment. 2. to save the labour cost through the improved the fishing gear. 3. to improve the fish quality through development of the process technology. 4. to increase the income of fishers through improvement of the distribution channels.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.349-359
• /
• 2007

In this study the hull form design with minimum resistance of domestic coastal fishing boat using a computer design procedure is carried out. The target boat is G/T 4.99 ton class fishing boat. which is one of the most popular boat in the coastal sea. For the task, the design parameters needed in preliminary stage are selected or determined from the existing boat. which has excellent resistances characteristics. In the EHP estimation during the design procedure, the main objective function is the hull resistance, and the initial hull forms before the optimization are selected from the boats that are in operation now. The EHP values from the hull after optimization process are also compared with those of the original hull to confirm its effect. Also, optimizing is investigated for the hull form to reestimate such factors as stability, laboring environment for the best design. it is expected that the results of this study here can be effectively used to improve the present design status of domestic small fishing boats.