• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.232-239
• /
• 2001

For the purpose of providing the basic data on the improved fishing gear and the man power saving, which contribute to enhance fishing efficiency of set net in the coast of Jeju Island, this study analyzed the catch of two fishing place for the past 3 years in order to compare the fishing efficiency between rectngular set net and pound net, which have been used for fishing with being attached to the set net fishing place in coast of Jeiu Island, Thereby the result is as follows ; 1. When using pound net, the total amount of catch during 1997 to 1999 was 2 times more than that of when using rectangular set net. 2. When using Pound net, the catch of squid, mackerel, rabbit fish and Yellow tail during 1997 to 1999 was 1.8 times more than that of when using rectangular set net.. 3. In case of rectangular set net, CPUE marked 10.1㎏ with horse amckerel, 20.5㎏ with squid, 18.0㎏ with rabbit fish and 2.2㎏ with Yellow tail, and in case of pound net, CPUE marked 57.5 ㎏ with horse mackerel, 30.0㎏ with squid, 25.0 with rabbit fish and 4.7㎏ with yellow tail, and on the whole CPUE of poind net marked higher. 4. In case of rectangular set net, the catch ratio for fishing operation marked 64% with horse mackerel, 79% with squid, 39% with rabbit fish and 14% with yellow tail, and in case of pound net, the catch ratio fishing operation marked 18% with horse mackerel, 85% with souid 40% with rabbit fish and 14% with yellow tail, and accordingly it showed the result that the catch ratio for fishing operation was higher with the case of rectangular set net, but higher with the case of pound net.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.87-93
• /
• 2014

PURPOSES : To evaluate the feasibility of cut waste fishing net as a reinforced fiber for concrete. METHODS : Strength characteristics of fiber reinforced concrete using waste fishing net were investigated. The cut waste fishing nets with 4~5cm length were putted into the soil-cement and cement concrete for pavement slab. RESULTS : Compression and tensile strength of fiber reinforced concrete using waste fishing net were increased. CONCLUSIONS : It was concluded that cut waste fishing net can be used as a reinforced fiber for cement concrete. However, sometimes using cut waste fishing net leads to decrease the strength; therefore, further researches are needed for real project.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.4
• /
• pp.343-352
• /
• 1999

Because stow net being used in now is doing throwing net and hauling net through a ship's side, the work is very complicated and the fishing boat needs many seamen and it could cause a loss of lives and ship in stormy weather. We are now using small mesh size 36~500mm and it even catches young fish, so we call it the fishing gear of resource reduction type.Therefore we must make manpower reduction in automatic operation, safe operation of throwing net and hauling net in the stern and the stern-typed stow net of resource management using large mesh. And we performed three-typed model tests to examine the fishing gear. The obtained results are as follows;1. The fishing gear being used in the ship's side type stow net has inappropriate standard and arrangement of the net, resistance increase of the fishing gear and frequent breakdown of the net.2. To supplement the fault of A-typed stow net, we schemed fishing gear developed as both B-type(12-seamed net) and C-types(8-seamed net) of the stern-typed stow net. 3. In model tests, C-typed model net(mesh size 40~1,600mm) was proved good fishing gear because the resistance in accordance with the flowing speed was comparatively small and it's mouth area was broad. 4. A-typed stow net had the spreading device attached to side panel of the net, but the stern-typed stow net had the spreading device consisted of 4 lines far behind about 6m from side panel of the net mouth. In the flowing speed 2knot, the spreading condition of fishing gear was proved batter than the former.

• Ocean and Polar Research
• /
• v.25 no.3
• /
• pp.331-345
• /
• 2003

The fishing ground surrounding Wangdol-cho is not only overexploited by the littering of dilapidated fishing net and equipment, but also by fishermen's overfishing, surpassing optimum fisheries resources. In addition, increasing fishing efforts (number of fishing vessel and fishing net, etc) contribute to the deterioration of fishing ground, and it is urgently required that schemes to tackle the problems should be taken. To effectively address the problems as such, this paper aims to propose sustainable utilization and management scheme of fishing ground through classification of fishing ground surrounding Wangdol-cho as one area which is less than 50m deep, measuring $13.66km^2$ and the other, permission fishing area of Gill Net fishery, measuring $347.23km^2$. The analysis shows that, for the water area less than 50m deep, implementation from a short-term perspective includes autonomous management fishery by gill net and trap fishery. For the permission fishing area of Gill Net fishery, implementation includes limit on fishing period, real name system of fishing equipment and limit on fishing equipment. Implementation from a medium and long-term perspective includes limit on scuba diving, designation of underwater sightseeing zone, sea farming, facilities of surveillance, adoption of approval system for the permission fishing area of Gill Net fishery and introduction of report system for fishing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.101-106
• /
• 2005

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

• International Journal of Contents
• /
• v.10 no.3
• /
• pp.84-89
• /
• 2014

The mass-spring model has been typically employed in physical-based simulators for clothes or patches. The mass-spring model frequently utilizes equal mass and the gravity factor. The model structure of masses supports a shape applicable to fishing nets. Therefore, to create a simulation model of a fishing net, we consider the mass-spring model and adopt the tidal-current and buoyancy effects in underwater environments. These additional factors lead to a more realistic visualization of fishing-net simulations. In this paper, we propose a new mass-spring model for a fishing-net and a method to simplify the calculation equations for a real-time simulation of a fishing-net model. Our 3D mass-spring model presents a mesh-structure similar to a typical mass-spring model except that each intersection point can have different masses. The motion of each mass is calculated periodically considering additional dynamics. To reduce the calculation time, we attempt to simplify the mathematical equations that include the effect of the tidal-current and buoyancy. Through this research, we expect to achieve a real-time and realistic simulation for the fishing net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.583-591
• /
• 2015

The coastal stow net (stow net hereafter) in Korea is one of the major fishing methods for yellow croaker (Larimichthys polyactis), ribbon fish (Trichiurus lepturus), and anchovy (Engraulis japonicus). In terms of energy efficiency, the stow net fishery is more competitive than towing fishing gears such as trawl gears. The fishing vessels in stow net fishery have consumed less fossil fuel and also have had less carbon dioxide emission into the atmosphere. however, the stow net fishery is necessary to be regulated due to its increased output of the fleet. Therefore, it is required for fisheries authorities to manage the fishing capacity or fishing power for the assurance of fishery's sustainability. For fisheries management authorities, it is necessary to quantify data related to fishing capacity and fishing power to deploy fishery policy in a sustainable way. In terms of data for decision-making, Data envelopment analysis (DEA) method was conducted to estimate fishing capacity. Fishing power index (FPI) was also applied to calculate relative fishing power to approach the problem in a quantitative way.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.11-18
• /
• 1986

Schooling behavier to a fishing gear and estimation of the volume of fish school in set net have ~ been studied by making use of such techniques as visual observations, underwater cameras, under- water televison. However, all of these observation techniques are subject to restrictions caused by illumination, underwater visibility, underwater transparent and sea conditions. For the above mentioned reasoa, one of the most effective method by this time become generally known a method using fish finder. In this paper, in order to control the fishing ground of set net effectively and to develope the telemetric fish finder, the experiments for the target strength, underwater shape of fishing gear, schooling behavier and volume of fish school with fish finder were performed at Galgott fishing ground of set net located Keouje Island, 15th-24th July and 18th-20th October in 1985. The results of these experiment showed that a method using fish finder in fishing grOlllld of set net is available for estimating distribution and school size, fish behavier in relation to a fishing gear and underwater shape of fishing gears.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.25-35
• /
• 2006

This paper investigates the mechanical characteristics of reinforced lightweight soil (RLS) using waste fishing net. RLS used in this experiment consists of dredged soil taken from construction site of Busan New Port, cement, air foam and waste fishing net. Several series of laboratory tests were performed to compare behavior characteristics between RLS and unreinforced lightweight soil, in which the reinforced effect by waste fishing net on RLS was evaluated. The experimental results of RLS indicated that the stress-strain relationship and the unconfined compressive strength are strongly influenced by the content of waste fishing net. Compressive strength of RLS Increased with the increase in curing time and generally increased by adding waste fishing net, but the amount of increase in compressive strength was not proportional to the content of waste fishing net. In this test, the maximum increase in compressive strength was obtained at 0.25% content of waste fishing net. On the other hand, water content of RLS rapidly decreased up to 7 days of curing time and converged to constant value.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.74-84
• /
• 2023

This paper is the result of a comparative analysis of crew members' workloads using the EMG and OWAS methods according to the fishing process before and after the improvement of the operating system of the experimental vessel, with the aim of improving operational efficiency and safety work of coastal improved stow net fishing vessels. The target crew members were three people with at least five years of experience on board the same fishing vessel as the experimental vessel. After improving the operating system, such as installing a power block crane and two capstans, change the location of the ball-roller, the time required for setting and hauling work decreased (p < .01), and the evaluation results by OWAS showed that the overall workload for setting and hauling net work decreased. The results of muscle activity analysis showed a decrease in lashing anchor work (p < .01) in the case of hauling net and in anchor dropping work in the case of setting net (p < .001). It is judged that the use of ball rollers in net handling has been reduced; consequently, work safety has been improved.