• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.290-297
• /
• 2008

STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.4
• /
• pp.279-288
• /
• 2007

In the present study, we focused on stem cells in the dental papilla of the tooth germ. The tooth germ, sometimes called the tooth bud, is the primordial structure from which a tooth is formed. The tooth germ consists of the enamel organ, the dental papilla, and the dental follicle. The dental papilla lies below a cellular aggregation of the enamel organ. Mesenchymal cells within the dental papilla are responsible for formation of dentin and pulp of a tooth. Tooth germ disappears as a tooth is formed, but that of a third molar stays in the jawbone of a human until the age of 10 to 16, because third molars grow slowly. Impacted third molar tooth germs from young adults are sometimes extracted for orthodontic treatment. In the present study, we evaluated the osteogenic activity and mineralization of cultured human dental papilla-derived cells. Dental papillas were harvested from mandible during surgical extraction of lower impacted third molar from 3 patients aged 13-15 years. After passage 3, the dental papilla-derived cells were trypsinized and subsequently suspended in the osteogenic induction DMEM medium supplemented with 10% fetal bovine serum, 50 g/ml L-ascorbic acid 2-phosphate, 10 nM dexamethasone and 10 mM -glycerophosphate at a density of $1\;{\times}10^6\;cells/dish$ in a 100-mm culture dish. The dental papilla-derived cells were then cultured for 6 weeks and the medium was changes every 3 days during the incubation period. Dental papilla-derived cells showed positive alkaline phosphatase (ALP) staining during 42 days of culture period. The formation of ALP stain showed its maximal manifestation at day 7 of culture period, then decreased in intensity during the culture period. ALP mRNA level was largely elevated at 1 weeks and gradually decreased with culture time. Osteocalcin mRNA expression appeared at day 14 in culture, after that its expression continuously increased in a time-dependent manner up to day 28. The expression remained constant thereafter. Runx2 expression appeared at day 7 with no detection thereafter. Von Kossa-positive mineralization nodules were first present at day 14 in culture followed by an increased number of positive nodules during the entire duration of the culture period. Osteocalcin secretion was detectable in the culture medium from 1 week. The secretion of osteocalcin from dental papilla-derived cells into the medium greatly increased after 3 weeks although it showed a shallow increase by then. In conclusion, our study showed that cultured human dental papilla-derived cells differentiated into active osteoblastic cells that were involved in synthesis of bone matrix and the subsequent mineralization of the matrix.

• The korean journal of orthodontics
• /
• v.33 no.3 s.98
• /
• pp.211-222
• /
• 2003

The purpose of this study was to determine whether there is an association between disk displacement of the Temporomandibular Joint (TMJ) and dentofacial asymmetry In orthodontic patients. The subjects consisted of 60 female orthodontic patients between the ages of 18 and 38 years (mean age 23.3 years) who had visited the Department of Orthodontics at Seoul National University Dental Hospital from January 2000 to April 2002. On the basis of magnetic resonance imaging (MRI) of their bilateral TMJs, the subjects were divided Into four groups'. bilateral normal group (twenty-one persons); disk displacement of right TMJ group (six persons); disk displacement of left TMJ group (nine persons); and disk displacement of both TMJs group (twenty-four persons) Postero-anterior (PA) cephalograms and diagnostic models which had been taken before orthodontic treatment were measured. In the linear measurements, a line connecting the right and left Latero-Orbitale (Lo) represented the horizontal reference line (H). The vertical reference line (V) was constructed as a line bisecting and running perpendicular to H. One-way analysis of variance (ANOVA) was used to test whether the mean values of measurements between groups were significantly different. In addition, Bonferronil's multiple comparison test was performed at a level of 0.05. The results were as follows; 1 In the diagnostic model analysis, the overjet, nght molar relationship, and left molar relationship were significantly different among the four groups. 2. In the PA cephalometric analysis, differences in the right and left vertical position of the lower first molar and Ag were significantly dissimilar among the four groups. 3. If the disk displacement of TMJ was present on one side, the ipsilateral ramus was shorter, resulting in asymmetry in the vertical position of Ag. This study indicated that dentofacial asymmetry might be related to the disk displacement of TMJ.

• International Journal of Oral Biology
• /
• v.36 no.1
• /
• pp.37-42
• /
• 2011

The working mechanism of bisphosphonate on bone cells is unclear despite its powerful inhibitory activity on bone resorption. The differentiation and activation of osteoclasts are essential for bone resorption and are controlled by the stimulatory RANKL and inhibitory OPG molecules. Teeth exhibit a range of movement patterns during their eruption to establish their form and function, which inevitably accompanies peripheral bone resorption. Hence, the mandible, which contains the teeth during their eruption processes, is a good model for revealing the inhibitory mechanism of bisphosphonate upon bone resorption. In the present study, RANKL and OPG expression were examined immunohistochemically in the mandible of rats with developing teeth after alendronate administration (2.5 mg/kg). The preeruptive mandibular first molars at postnatal days 3 to 10 showed the developing stages from bell to crown. No morphological changes in tooth formation were observed after alendronate administration. The number of osteoclasts in the alveolar bone around the developing teeth decreased markedly at postnatal days 3, 7 and 10 compared with the control group. RANKL induced strong positive immunohistochemical reactions in the dental follicles and stromal cells around the mandibular first molar. In particular, many osteoclasts with strongly positive reactions to RANKL appeared above the developing mandibular first molars at postnatal days 3 and 10. Immunohistochemical reactions with RANKL after alendronate administration were weaker than the control groups. However, the immunohistochemical reactivity to OPG was stronger after alendronate administration, at postnatal days 3 and 10. These results suggest that alendronate may decrease bone resorption by regulating the RANKL/OPG pathway in the process of osteoclast formation, resulting in a delay in tooth eruption.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.34-39
• /
• 2010

Objective: The aim of the present study was to evaluate the changes in tooth mobility following orthodontic treatment and to obtain information regarding the guideline of retainer wear duration during the post-treatment period. Methods: The sample consisted of twenty patients who had been treated with edgewise appliances. The mobility of the maxillary teeth from the central incisor to the first molar was measured bilaterally by way of the $Periotest^{(R)}$, a non-invasive, electronic device that provides an objective measurement of the reaction of the periodontium to a defined impact load. Tooth mobility was monitored at the time of the removal of the orthodontic appliances and subsequently at three-month intervals during the two years following appliance removal. Results: Tooth mobility decreased rapidly for the first six months and then decreased at a slower rate during the next six months; no statistically significant decrease in mobility was observed during the second year following appliance removal. Conclusions: The results of the present study suggest that adequate tooth stabilization is critical during the first six months following appliance removal and that continued wearing of retainers is recommended at least until twelve months after the completion of orthodontic treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.2
• /
• pp.170-179
• /
• 2022

This study aimed to evaluate the masticatory performance of Korean children and adolescents and to investigate related factors. Early loss of primary molars, degree of occlusion of first molars, occlusal relationship of first molars, and presence of anterior crossbite were considered. From March 2020 to July 2021, 56 children and adolescents between the ages of 6 and 12 were included. The mixing ability index (MAI) was calculated to evaluate the masticatory efficiency of children and adolescents. The subjects were classified into three groups according to the number of early lost primary molars; normal dentition, 1 - 2 teeth lost, more than 3 teeth lost. The number of participants are 23, 18, and 15, respectively. There was no difference in the MAI values between the normal dentition group and the group has 1 - 2 teeth lost. However, when 3 or more primary molars were lost, the MAI value decreased and a significant difference was observed. This study is the first study to evaluate the masticatory performance of children and adolescents in Korea, and it will be helpful to pediatric dentists who evaluate the masticatory performance of children and adolescents and strive to improve the masticatory efficiency of children and adolescents in clinical practice.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.169-178
• /
• 2024

Recently, several attempts have been made to integrate AI into the field of dentistry. To overcome the limitations of traditional fixed prosthetic fabrication methods such as CAD-CAM (computer-aided design-computer-aided manufacturing), AI programs are being developed for automated crown fabrication, and various studies are underway to applicate in clinical situation. In these case studies, single-unit fixed prostheses were fabricated using an AI program (Dentbird Crown, Imagoworks Inc, Seoul, Korea) in both the anterior and posterior regions and the fabrication time and accuracy were compared with previously used CAD-CAM method. The first case is a 44-year-old woman who presented for re-fabrication of a zirconia prosthesis due to a prosthesis fracture on the lingual side of the upper right lateral incisor. The second case is a 53-year-old male patient who presented for a crown restoration on an upper left first molar following root canal treatment, where he received a final zirconia restoration. In both cases, the first prosthesis was designed manually using a CAD program, the second prosthesis was designed using AI alone, and the third prosthesis was designed using AI and then modified by CAD program, and the three designs were superimposed to compare suitability. When evaluated after temporary placement, the final prosthesis demonstrates adequate stability, retention and support, resulting in functional and esthetic satisfaction.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.533-547
• /
• 1999

Malignant fibrous histiocytoma is one of the most common soft tissue sarcomas in late adult life. but its incidence in oral and maxillofacial region is extremely rare. We report a case of malignant fibrous histiocytoma which occurred in the infratemporal fossa. Conventional radiograph of this case showed an ill-defined radiolucent lesion in the alveolar bone of the right maxillary first molar area. the lateral wall of the maxillary sinus. and the ascending ramus of mandible. MRI demonstrated a well defined mass of intermediate signal intensitiy in Tl weighted images but T2 weighted images showed two distinctive regions of different characteristics. Upper portion of the lesion was of hyperintense signal but (at) lower portion, the signal intensity decreased clearly, which might mean that this lesion(mass) is composed of two different subtypes though it couldn't be confirmed by histopathological examination. Biopsy was taken the lesion as only in the soft tissue of the maxillary posterior alveolar region and confirmed the storiform-pleomorphic type of malignant fibrous histiocytoma. Histopathological subtype was well consistent with the relatively aggressive imaging findings of that region. We expect more detailed analysis of the nature of malignant fibrous histiocytoma with improvement of the imaging modality and the identification of the relationship between diagnostic imaging and histopathologic findings.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.165-179
• /
• 1991

This study was performed to understand the irradiation effects on the mandibular condyle and mandibular growth in developing white rats. Forty eight white male rats of the Sprague-Dawley strain aged 4 weeks, were devided into two groups; control group and experimental group. A single target dose of l0Gy of radiation was given to the mandibular condylar area and the observations of the photo analysis, radiologic, histopathologic and immunohistochemical study revealed as follows; 1. Animals killed one week after irradiation showed lesser increase in body weights, no difference in photo analysis and decreased thickness of cartilagenous layers of the condyle than the control group. 2. Two weeks after irradiation the weight increases were almost same in both irradiated and control groups and in photo analysis, the distance from Mental Foramen to Incisal tip (Mf-It) was longer than the controls. Repair processes were taken place in irradiated group, but the cartilagenous layers were thinner than the controls. 3. By the third week after exposure further repair was seen in the trabeculae and the distance from Condylion to Mandibular plane (Cd-Cd') was longer than the controls and the weight increases were almost same as the controls. 4. At 4 weeks after irradiation the cells of proliferating zone repaired to almost normal findings, but the cartilagenous cell layers were still thinner than the control animals. In photo analysis, the distances from Menton to Anterior Notch (Me-An), from First Molar to Mandibular plane (Fm-Fm') were shorter and the weight increases were lesser than the controls. 5. In the S-100 antibody, the positive cells were increased in number, but decreased reactivities were seen at the proliferating zone of the irradiated groups. In the Monoclonal Anti-Proteoglycan antibody and Type Ⅰ collagen antibody, the irradiated groups showed little decreased number of positive cells and in the Type Ⅱ collagen antibody, the differences between irradiated and control groups were undetectable in immunohistochemical study.

• Journal of Periodontal and Implant Science
• /
• v.45 no.6
• /
• pp.205-209
• /
• 2015

Purpose: Dental implants present several advantages over other tooth replacement options. However, there has been little research on masticatory function in relation to implant treatment. Therefore, the aim of the present study was to evaluate the improvement of masticatory function two weeks after implant restoration. Methods: Masticatory ability was evaluated with the subjective food intake ability (FIA) and objective mixing ability index (MAI) methods. Fifty-four subjects with first and second missing molars completed the study. The subjects were asked to complete a self-reported questionnaire about 30 different food items, and to chew wax samples 10 times both before and two weeks after implant restoration. A total of 108 waxes were analyzed with an image analysis program. Results: Dental implant restoration for lost molar teeth on one side increased the FIA score by 9.0% (P<0.0001). The MAI score also increased, by 14.3% after implant restoration (P<0.0001). Comparison between the good and poor mastication groups, which were subdivided based on the median MAI score before implant restoration, showed that the FIA score of the poor group was enhanced 1.1-fold while its MAI score was enhanced 2.0-fold two weeks after an implant surgery. Conclusions: Using the FIA and MAI assessment methods, this study showed that masticatory function was improved two weeks after implant restoration. In particular, the enhancement of masticatory function by implant restoration was greater in patients with relatively poor initial mastication than in those with good initial mastication.