• KSBB Journal
• /
• v.14 no.4
• /
• pp.422-428
• /
• 1999

A transformat Alcaligence eutrophus GA5 harboring phbC gene from A. latus was cultivated for production of Poly(3-hydroxybutyrate-4-hydroxybutyrate)[P(3HB-4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB). Transformation did not influenced significantly on total cell growth, on total cell growth, concentration, and content of P(3HB-4HB), however, significantly influenced on 4HB molar fraction in P(3HB-4HB) increasing from 12.3 to 23.5 mol% after 48 h cultivation in two-stage using 1.0%(W/V) of ${\gamma}$-butyrolactone as a precursor compare to parent strain. Above increment may be due to the accelerated polymerization between 3HB and 4HB converted from precusor compound by amplified phbC gene. Citrate increased remarkbly total cell mass and P(3HB-4HB) concentration, but did not influenced on the molar fraction of 4HB, meanwhile, magnesium ion influenced on P(3HB-4HB) concentration and 4HB molar fraction significantly. The two-stage cultivation method was modified, in such a way minimizing P(3HB) accumulated inside of cell grown at first-stage, consquently, 26.3% of P(3HB-4HB) containing 61.0 mol% of 4HB fraction was obtained after 72hr. Furthermore, semi-homopolymeric P(4HB) containing 92.0 mol% of 4Hb was obtained, and its structure was confirmed by $^1$H-NMR.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.265-277
• /
• 2014

Purpose: The purpose of this study was to investigate the differences of displacement pattern depending on type of sliding jig and application method during maxillary molar distalization with temporary anchorage devices (TADs). Materials and Methods: Maxilla with normal tooth size and arch shape was selected to create a 3-dimensional finite element model, which included the bracket, orthodontic main archwire, removable sliding jig (R-jig). The orthodontic mini-implant anchorage was set 8 mm superiorly from main archwire, buccally between the second premolar and first molar. The base experimental design was Condition 1, which was composed $0.019{\times}0.025$ inch stainless steel (SS) of wire size of R-jig, 200 gm force, un-tied state. And the other designs varied to wire size of R-jig, magnitude of force. The results are as follows. Results: As the wire size of R-jig was increased, the deformation of R-jig was decreased. However, the displacement of second molar wasn't different each other. As the force to second molar was increased, the more displacement of second molar was observed, and the more distal tipping movement, vetical displacement was observed. Conclusion: R-jig can get distal teeth movement in orthodontic treatment without side effects.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.47-58
• /
• 1998

The purpose of this study was to investigate an influence of the change of central panoramic curves on the image reconstruction in the dental implant CT. The author designed three experimental groups according to the location of central panoramic curve. In group A, central panoramic curve was determined as the curve connecting the center of roots from the first premolar to the first molar. In group B, central panoramic curve was determined as the line connecting the lingual cortical plate at the level of the mesial aspect of the first premolar with the buccal cortical plate at the level of the mesial aspect of the first molar. In Group C, central panoramic curve was determined as the line connecting the buccal cortical plate at the level of the mesial aspect of the first premolar with the lingual cortical plate at the level of the mesial aspect of the first molar. Twenty four reformatted CT images was acquired from four mandibles embedded in the resin block and twenty four contact radiographs of dog specimens were acquired. Each Image was processed under Adobe Photoshop program analysed by MSPA(mandible/maxilla shape pattern analysis) variables such as MXVD, MXHD, UHD, MHD, and LHD. The obtained results were as follows ; 1. The mean of MXVD variable was 19.9, 20.2, and 20.0 in group A, B, and C, respectively, which were smaller than actual value 20.5. But, there was no significant difference among 3 groups (p>0.05). 2. The mean of MXHD, UHD, MHD, and LHD variables in group A, B, and C was 11.9, 12.2, and 12.3; 9.3, 9.5, and 9.6; 10.0, 10.3, and 10.3; 9.2, 9.3, and 9.4 respectively which were equal to or greater than the actual value 11.8, 9.3, 10.0, and 9.2. But, there was no significant difference among 3 groups (p>0.05). 3. The number of noneffective observations with difference over or under 1 mm with comparison to the actual value was 24(20％), 58(48.3％), and 52(43.3％), respectively, in group A, B, and C. 4. In group A, the number of observations over 1 mm and under 1 mm was 9 and 15, respectively, but in group Band C, the number of observations over 1 mm was more than under 1 mm.

• Anatomy & Biological Anthropology
• /
• v.27 no.3
• /
• pp.155-163
• /
• 2014

This study aimed to investigate the cusp size and morphological characteristics of permanent mandibular molars in Koreans with reference to the hypoconulid, and to analyze the differences and correlations between both sexes as well as between first and second mandibular molars. We obtained data from dental casts of 110 adults (78 males and 32 females). Mesiodistal and buccolingual diameters of first and second mandibular molars, the area of five cusps (protoconid, metaconid, hypoconid, entoconid, and hypoconulid), as well as the total cusp area and occlusal table area were measured. Paired t-test was performed to analyze the morphological differences between first and second mandibular molars and the sex differences between both sexes using SPSS program. Crown diameters and cusp areas of mandibular first molars were larger than those of mandibular second molars in both sexes. The hypoconulid was the most variable in size and morphological pattern among the five cusps, and the first molars showed a higher incidence of hypoconulid than the second molars. Except for the entoconid area of the first molar (p=0.06) and the hypoconulid area of the second molar (p=0.24), all other mean values were larger in males than in females, demonstrating a significant sexual dimorphism. These data suggest that the teeth which develop late in ontogeny tend to be smaller in size and more variable in morphological characteristics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.491-495
• /
• 1994

The ectopic eruption is defined rise to be abnormal eruption, which gives to displacement of the teeth and abnormal root resorption of adjacent teeth. The ectopic eruption of first permanent molar is approximately 2-4% of the population, most of them are in the maxilla, rarely in the mandible. In the case of the second permanent molars, most of them are found in the mandible for the reason of the arch length discrepancies and large size of the teeth. The ectopic erupted molars should be treated early in order to coordinate normal growth pattern and to obtain good occlusal support. So, this should be early diagnosed and treated. But, ectopically erupting molars are often self-corrected, hence periodic follow-up is required. The methods of the treatment are largely classified into surgical, surgical-orthodontic, and orthodontic method. Especially in orthodontic method, they are divided as follows; appliances that is positioned at the contact point for unlocking and the distal movement, fixed and removable appliance that is connected to more than one tooth, and occlusion guiding method after disking or extraction of the second deciduous molar. The report presents the good results in treating patients, whose chief complaint was ectopic eruption of mandibular permanent molars.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.37-55
• /
• 1989

The tissue reactions concerned in alveolar bone remodelling at the pressure zones of rat molar periodontium associated with the application of force (15 gm) to the maxillary first molar teeth of the albino rats were studied by the transmission electron microscopy. Osteoclasts referrable to bone resorption were observed thereafter 3 hour survival period and undermining resorption was generated thenceforth 2 day survival period. Bone resorption, reversal zone and new bone formation were simultaneously observed adjacent to the zone of undermining resorption in the 7 day survival period. Osteoclasts with well developed primary lysosome, ruffled border, clear zone, granules and Golgi apparatus were detected at the zone of the bone resorption, and dark and bright cells adjacent to the osteoclasts as well. Mononuclear cells and perpendicularly arranged collagenous fibers were observed in the reversal zone and, on the other hand, osteoblasts with well developed Golgi apparatus and rough endoplasmic reticulum were detected at the zone of bone formation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2013

Special attention in the role of convection in vapor crystal growth has been paid since some single crystals under microgravity environments less than 1 $g_0$ exhibits a diffusive-convection mode and much uniformity in front of the crystal regions than a normal gravity acceleration of 1 $g_0$. The total molar fluxes show asymmetrical patterns in interfacial distribution, which indicates the occurrence of either one single or more than one convective cell. As the gravitational level decreases form 1 $g_0$ down to $1.0{\times}10^{-4}\;g_0$, the intensity of convection, indicative of the maximum molar fluxes, is reduced significantly for ${\Delta}T=30K$ and 90 K. The total molar fluxes decay first order exponentially with the partial pressure of component B, PB (Torr) for 20 Torr ${\leq}PB{\leq}$ 300 Torr, and two gravity accelerations of $g_y=1\;g_0$ and 0.1 $g_0$.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.268-274
• /
• 2017

The purpose of this article is to introduce a simple appliance that uses a setup model and a nickel-titanium (Ni-Ti) wire for correcting the mesial rotation and drift of the permanent maxillary first molar. The technique involves bonding a Ni-Ti wire to the proper position of the target tooth on a setup model, followed by the fabrication of the transfer cap for indirect bonding and its transfer to the patient's teeth. This appliance causes less discomfort and provides better oral hygiene for the patients than do conventional appliances such as the bracket, pendulum, and distal jet. The treatment time is also shorter with the new appliance than with full-fixed appliances. Moreover, the applicability of the new appliance can be expanded to many cases by using screws or splinting with adjacent teeth to improve anchorage.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.483-490
• /
• 2000

The aim of this study was to analyze the reliability of an ultrasonic device(SDM) measuring soft tissue thickness in relation to tooth position, and to find factors which can influence the reliability. The results showed that 1. measurement error was the largest in the maxillary second molar position and the smallest in the mandibular central incisor position. 2. in a box whisker plot, the difference between two measurements was most widely distributed in molar positions. 3. in Pearson correlation analysis, the relationship between two measurements was the highest in the maxillary lateral incisor position and, the lowest in the maxillary second molar, mandibular first and second premolar position. 4. a stepwise multiple regression analysis could explain the difference of two measurements with various independent variables in 29.7% (P<0.0001). Gingival thickness was the only variable influencing the measurement difference in a statistically significant level(P<0.0001). It can be concluded that its high reliability, ease to use and patient comfort justified the application of the SDM in measurement of soft tissue thickness.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.110-116
• /
• 2000

A 61-years old man with diabetes mellitus(DM) was admitted to our hospital, complaining of progressive right periorbital swelling, headache and toothache on the right lower second molar. On the first visit, moderate swelling was noticed from the right periorbital region with exophthalmos and subconjunctival effusion. Intraorally, right lower second molar had a severe periodontal disease and fistular formation on its distal area. From 3 days after hospitalization, the visual acuity of his right eye was gradually worsen and we performed CT scan. CT scan demonstrated an inflammatory change at the right orbit with subperiosteal abscess at the inferior orbital wall, which was extended from the right infratemporal, parapharyngeal and internal pterygoid space. Patient was treated by mean of intraoral(right upper vestibular and retromolar) and extraoral(infraorbital) incision and drainage, massive anti-therapy and DM control. The patient improved gradually and finally was discharged from the hospital, but his visual loss of right side was not recovered.