• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.59-70
• /
• 2003

We estimated the spectrum decay parameter $\chi$ and the stress parameter ($\Delta$$\sigma$) in southeastern Korea. Especially, we propose a procedure to compute site-independent $\chi$$_{q}$ and dependent $\chi$$_{s}$ values, separately, This procedure is to use the coda normalization method for the computation of site independent Q or corresponding $\chi$$_{q}$ value as the first step followed by the next step, the computation of $\chi$$_{s}$ values for each site using the given $\chi$$_{q}$ value evaluated at the first step, For the estimation of stress parameter, we used seismic data monitored from three earthquakes occurred near Gyeongju in 1999 with the method of Jo and Baag, In addition, we simulated strong ground motion using the $\chi$ value and the stress parameter, In this case, we calculated the $\chi$ value with conventional method. The $\chi$ value of 0.016+0.000157R and the stress parameter of 92-bar was applied to the stochastic simulation, At last, we derived seismic attenuation equation using results of the stochastic prediction, and compared these results with some others reported previously.ported previously.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2008

Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.45-67
• /
• 2017

Many of the modern animations have 3D technology, and as time goes by, their production technology becomes more diverse and sophisticated. When John Alan Lasseter insisted on studying CG animation technology, he might have taken our jobs to the computer in the near future, as many people were worried about. It may be premature to worry that an unstable future may become a reality at this point, but I do not think there will be any difference in the fact that many animations are being produced using 3D technology. Since the Toy Story was screened in 1995, the 3D animation production technology has started to develop rapidly and now it has been elaborately developed so that it can not distinguish the part where computer graphics technology is applied from the live film. On the other hand, Disney's 2D animation part falls into the decline path because the appearance of 3D animation was perceived as a new expression technique at that time, and the efficiency of the work process was superior to the 2D animation in addition to receiving the attention from the audience. Is it necessary to accept the retrogression of 2D animation technology, reflecting the environment of the animation industry that 3D animation production technology has become mainstream in the first 20 years since the first theatrical works appeared? Since 2D animation technology has a long history and is still attractive to the audience, it is not hard to find an attempt to combine 2D and 3D animation technology. In this paper, I want to study 2D hand - drawn character in 3D animation. Through this, it is hoped that animation convergence technology will be applied more actively in the future.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.81-92
• /
• 2016

Purpose - In recent years, management scholars have expressed growing interest in the concept of person-Job fit because of having many benefits for employees' attitudes and behaviors. The related research is needed to determine what specific types of fit are related to each other, and to get important individual outcomes. Person-job fit of employees in service organization plays an important role in company as well as person in service industry. Person-job fit, representing the consistency between person (service provider) and job (service provided to the customers), gives significant and positive effects on the attitude and behavior of service provider. On the basis of the study background, the purpose of this study is as follows. First, we would like to examine the effects of person-job fit of service provider on their emotional intelligence. Emotional intelligence is divided into four sub-factors such as self-understanding, understanding others, emotional utilization, and emotional regulation. Second, we would like to identify the relationships between job satisfaction and sub-factors such as self-understanding, understanding others, emotional utilization, and emotional regulation. Research design, data, and methodology - We performed structural equation model using Spss 18.0 and Amos 20.0 in order to verify the hypotheses. Subjects were golf service assistants who were high-touching service with high degree in interaction and long contact time with customers. 178 out of the total 200 surveys were used in evaluation from helpers of golf service working as full-time service provider after selecting two locations of golf course located near Busan. From the evaluation of reliability and validity with variables used in this research, they satisfied and confirmed certain standard. Results - The results are as follows. First, as the results of identifying the relationships between person-job fit and emotional intelligence of service provider, person-job fit did not have positive and significant effect on self-understanding. On the other hand, it affected positively and significantly other factors in emotional intelligence such as emotion to others, emotional utilization, and emotional regulation. Second, as the results of identifying the relationship between emotional intelligence and job satisfaction, sub-factors in emotional intelligence such as emotion to others, emotional utilization, and emotional regulation except self-emotion affected significantly and positively job satisfaction. However, self-emotion did not have significant and positive effects on job satisfaction. Conclusion - These results will be valuable and used for service providers. In addition, many service providers will recognize that person-job fit is very important to get a job. This research has a purpose on the assumption that appropriateness between individual and task in service industry shall act as major influence in emotional intelligence of service provider. Recognitive ability of service provider is also very important per characteristics of service, but emotional intelligence that interacts and connected directly with most customers can be a very meaningful factor as well. Emotional intelligence allows people to recognize, understand, and empathize the emotion of customers shall be a positive reinforcement for customers to evaluate the service ultimately.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.19-28
• /
• 2022

Cavities behind concrete walls can adversely affect the stability of structures. Thus study aims to detect cavities behind concrete structures using a microphone in a laboratory model test. A small-scale concrete wall is constructed in a chamber, which is composed of a reinforced concrete plate and dry soil. A plastic bowl is then placed between the plate and soil to simulate a cavity behind the concrete structure. Leaky surface acoustic waves are generated by impacting the concrete plate using a hammer and are measured using a microphone. The measured signals are analyzed using natural frequencies, and cavity-free sections are evaluated. The test results show that the first natural frequency decreases at the cavity section due to the flexural vibration behavior of the plate. In addition, the amplitude corresponding to the first natural frequency decreases as the measurement location becomes farther from the cavity center and significantly decreases at the measurement locations near the rebars. This study demonstrates that a microphone may be useful to detect cavities behind concrete walls.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.104-121
• /
• 2017

The present study attempted to produce the floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace of the Late Joseon Period through the use of rubber sheeting transformation based on the drawing principles of "Donggwoldo(東闕圖)". First, the study compared the actual sizes of the major buildings that have existed since the production of "Donggwoldo(東闕圖)" with the sizes depicted in the picture to reveal that the front elevation of the buildings was produced by reducing it by approximately 1/200. However, the study could not confirm the same production proportions for the side elevation. Only the lengths of the side elevation were depicted at around half of the actual proportions, and as the diagonal line angles were found to be at an average of $39^{\circ}$, the study confirmed they were drawn in a manner similar to cabinet projection. Second, the study created an obliquely projected floor plan by inversely shadowing the drawing principles of "Donggwoldo(東闕圖)" and produced a floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace through the use of rubber sheeting transformation. Projective transformation was confirmed as most suitable during the transformation, and with standard error of 2.1208m, the relatively high accuracy of the transformation shows that the production of a floor plan for "Donggwoldo(東闕圖)" is significant. Furthermore, it implies the possibility of producing floor plans for various documentary paintings produced using the paralleled oblique drawing method in addition to "Donggwoldo(東闕圖)". Third, the study evaluated the accuracy of the spatial information provided by the produced floor plan by comparing the three items of Geumcheongyo Bridge location, Geumcheongyo Bridge and Jinseonmun Gate arrangement, and Geumcheon stone embankment location. The results confirmed the possibility of utilizing the floor plan as a useful tool which helps understand the appearance of the surroundings at the time of "Donggwoldo(東闕圖)" production because it is parallel to the excavation results of the Geumcheongyo Bridge and its context. Therefore, the present study is significant in that it seeks the possibility of producing spatial information recorded in "Donggwoldo(東闕圖)" by applying rubber sheeting transformation and consequently in that it presents a new methodology for understanding the appearance of the East Palace of the Late Joseon Period.

• Journal of the Korean Regional Science Association
• /
• v.35 no.3
• /
• pp.45-58
• /
• 2019

The government is recently pushing for five large-scale public housing sites near Seoul, the so-called third wave of new towns. In this regard, this study sought to analyze the key considerations in planning new towns from the perspective of the residents who are the consumers, using survey data. For this purpose, frequency analysis and variance analysis(ANOVA) were conducted on existing first and second era of new towns and the third era of new towns scheduled for construction. Eight indicators, such as environmental comfort, self-sufficiency such as jobs, transportation access and convenience, were set as subordinate variables, and characteristics of residents, including gender, age, number of households, household income, occupation, and residential areas, were set as explanatory variables. According to the analysis, the respondents rated the first era of new towns more positively than the second era of new towns. For self-sufficiency items such as jobs, both the first and second era of new towns showed low levels. In addition, for the eight indicators, the first era of new towns were no significant differences depending on gender, number of households, or household income, and the second era of new towns were no significant differences by the number of households, household income, occupations or place of residence. However, for new towns in the third period, the assessment of the importance of each indicator by age, number of households, household income and occupation showed significant differences. The results of the multi-comparison analysis of the third era of new towns showed that the importance of environmental comfort was highly valued by the youth, the managerial/professional/clerical position, single or five more persons of household, and the youth, high income household, the managerial/professional/clerical position when it comes to accessibility and convenience of transportation. It suggests that various personal characteristics and demands for each of the planning indicators need to be considered in planning for the third era of new towns.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.62-77
• /
• 2012

This study aimed to investigate the Confucian-oriented agriculture phase of the Joseon Dynasty, which was reflected at the palaces, by analyzing constructional aspects and spatial characteristics of farmlands at the palace rear gardens. The objective sites were the rear gardens of Gyeongbok Palace, Changkyung Palace, and the outside of Sinmoomoon(神武門) This study was based on literature reviews. The farmlands at the palace rear garden were constructed to self-estimate the year's harvest condition within the palaces. It was a part of the agriculture encouragement policy on governing the group of Joseon like publishing the Nongsajiksul(農事直說) and establishing the Chingyeongnye(親耕禮: king's own cultivation ceremony) and Kikokje(祈穀祭: the rite of praying for grain). In addition, farmlands of the rear garden were operated from the beginning of the state almost until the Japanese colonial era. The results were summarized as follows: First, Gyeongbok Palace rear garden's farmland which begin at the reign of Sejong(世宗) existed at the present Hyangwonji(香遠池) area. It was constructed in order to check the advanced agricultural technologies. The rear garden's farmland in Changkyung Palace, which was executed during the reign of Seongjong(成宗), was constructed right after the initial Chingyeongnye of the Joseon Dynasty. Therefore, it might be understood as the context of the king's own cultivation of the Jeokjeonchinkyung(籍田親耕). Injo(仁祖) dug for farmland in the ground of the Gyemgdeok Palace(慶德宮) though there was some stay palace, when his stay dragged out for too long. This bespeaks that those farmlands at the palace rear gardens were of great importance in the Joseon political history. The farmland near Gyeongnongjae(耕農齋), which was made during the reign of Gojong(高宗), inherited predecessor's walks of the promoting agriculture and exhibited spatial compositions such as the rear garden's farmland at Changkyung Palace. Secondly, irrigation, its water systems, the name of observatory to study farming[觀耕臺] and location requirements for farmland had something in common. It was assumed as universal forms of physiocracy-space in the Joseon Dynasty. In this study, by considering aspects of operating about vegetable garden managed by eunuchs and of the orchard in palace to cultivate fruits for national ceremonies, it could be assumed that landscape architecture of royal palace in the Joseon Dynasty did not only focus on solemnity, orderliness and fanciness but also on the practical and productive which was helpful in life. In addition, the diverse activities of productive landscape architecture led by the royal family in palaces, and the initiatively tested advanced agricultural technologies by the king were considered as an aspect of the Korean traditional specific royal palace landscape architecture. That is considered sole landscape not only to love of the people but also the 'agriculture-first' principle which were absent from other nations.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.95-102
• /
• 2000

Experiments related to the field of sericulture started in the years 1900, in Korea. The sericultural experimental station in Korea was first organized among agricultural fields in Korea, indicating that sericulture in Korea was regarded as an important field of agriculture. Sericulture has been devoted to a great deal for the improvement of Korean economy during the past 100 years even under the coarse social circumstances caused particularly by the Korean War, However, the traditional Korean sericulture, aimed to produce silk yarn, was weakened, because of several reasons such as diminishment in silk consumption, increased labor charge in Korea, and so on. After this difficulty time, the Korean sericulture was revolutionized by shifting into functional sericulture from 1995, and the Korean sericulture now plays an important role for the improvement of human health. Mulberry tree, silkworm, and silk have a boundless potential to be developed as resources. We expect the know-how obtained through silkworm research would expand to the other insect research too. Thus, an area of entomological industry is hoped to prosper owing to insect research as well as sericulture. Mulberry tree is known to possess many bio-active substances, so it can be utilized as a resource for substitute medicine and a raw material for the functional food. In addition, an invention of genetically engineered mulberry variety, which will produce more bioactive substances, is expected. Silkworm is one of the most extensively studied insect organisms on the genome so far, Thus, silkworm is expected to be an "insect bio-factory", enabling mass-production of useful proteins by transformation, in which useful foreign genes are assimilated into silkworm. Silk can be transformed into several phases, because it possesses useful functional groups, which are sensitive to chemical reaction. Also, because silk fibrin itself is protein, it has a superior applicability as tissue membrane. Due to this usefulness, many researchers are now working on the silk as food, cosmetic, medical resource, and bioengineering resource, and even an expanded application is expected using silk in the future. Until now, the researches on insects were largely focused on the prevention of the damage caused by pest, instead of a beneficial aspect. However, insects are thought to be the fourth natural resource in the world, possessing unlimited potential as world resources in the near future. Therefore, our entomological research effort should be focused on the subject with potential for industrialization. Such subject includes selecting the insect species useful for environmental evaluation, construction of environment-friendly agricultural ecosystem, pollen mediation, pet, and advanced bio-resources.

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.471-526
• /
• 2016

In order to investigate water flow characteristics after inrushing in process of karst tunnel excavation, numerical simulations for five case studies of water inrush from the tunnel floor are carried out by using the FLUENT software on the background of Qiyueshan high risk karst tunnel. Firstly, the velocity-distance curves and pressure-distance curves are drawn by selecting a series of probing lines in a plane. Then, the variation characteristics of velocity and pressure are analyzed and the respective optimized escape routes are made. Finally, water flow characteristics after inrushing from the tunnel floor are discussed and summarized by comparing case studies under the conditions of different water-inrush positions and excavation situations. The results show that: (1) Tunnel constructors should first move to the tunnel side wall and then escape quickly when water inrush happens. (2) Tunnel constructors must not stay at the intersection area of the cross passage and tunnels when escaping. (3) When water inrush from floor happens in the left tunnel, if tunnel constructors meet the cross passage during escaping, they should pass through it rapidly, turn to the right tunnel and run to the entrance. (4) When water inrush from floor happens in the left tunnel, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment in the vicinity of the right tunnel working face. In addition, some rescuing equipment can be set up at the high location of the cross passage. (5) When water inrush from floor happens in the cross passage, tunnel constructors should move to the tunnel side wall quickly, turn to the tunnel without water inrush and run to the entrance. (6) When water inrush from floor happens in the cross passage, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment near by the left or the right tunnel working face. The results are of important practical significance and engineering value to ensure the safety of tunnel construction.