• 전기학회논문지
• /
• 제58권2호
• /
• pp.217-224
• /
• 2009

This paper presents a new AC/DC converter scheme for HVDC system to achieve a high power factor operation. The new AC/DC converter consists of two 12-pulse bridge converters in series: the primary and auxiliary converters. Ignition angles of the main and auxiliary converters are controlled independently to maintain the nominal DC voltage and control auxiliary voltage. The resulted DC voltage obtained by superimposing the above two phase modulated voltages can be controlled very rapidly over a wide range, and a high power factor operation is achieved. Performance improvements in power factor and harmonic distortion are validated by theoretic derivations and experiments with prototype HVDC system. With the proposed converters, investment for reactive power compensation and filter in HVDC system can be saved significantly.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.297-304
• /
• 2002

The paper identifies a severe form of core saturation instability in a DC/AC interaction system. It then seeks solutions to the problem by HVDC control means. This is achieved by a proper design of the Voltage Dependent Current Order Limiter (VDCOL), the Current Regulate. and Timing Pulse generator. Supplementary control loops have also been introduced to result in a satisfactory performance as compared to that obtained one with the use of uncharacteristic harmonic filter on the AC side. All the options have been demonstrated through recovery performance of the DC link in response to both 1-phase and 3-phase 5 cycle faults on both rectifier and inverter commutating buses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.746-748
• /
• 1987

A volocity and an efficiency of an induction motor are lower than those of a DC motor. But in the control, the utility of an AC motor is more enlarged with the development of inverter. But unfortunately, in using the induction motor, it include a lot of harmonics because of switching of semi-conductor devices(SCR or Tr) in the inverter. In PCR, as the change of a firing angle $\alpha$, harmonics are changed. Hence, in this thesis analyze the harmonics and provide the region of it's application when PWM and 6-step applied to inverter. Of course, frequencies of inverter changed. Especially, in PWM a carrier ratio is changed.

• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.25-32
• /
• 1988

In this paper, a new method for reducing harmonics in input AC line currents of converter is presented, which is due mainly to the equipment of 2-4 switching taps on interphase reactor. When this method is applicable to conventional 12 pulse converter, the 24 pulse converter, the 24 pulse or 48 pulse converter is controlled by firing angles. The former is performe in 2 tap method when less than 15 degrees, and the letter in 4tap method when more than 15 degrees. Therefore, the proposed method has the advantages of reducing harmonics in full range of control angle and comparison with the conventional 3 tap method. We proved the validity of that theoretically and experimentally.

• 전력전자학회논문지
• /
• 제13권4호
• /
• pp.270-277
• /
• 2008

Capacitor Commutated Converter HVDC(High Voltage Direct Current) 시스템은 무효전력의 수급이 작기 때문에 점호각이 180도까지 증가시킬 수 있으므로 취약한 계통에 적용이 가능하다. 따라서, 본 논문에서는 변압기와 밸브 사이에 직렬커패시터가 연결된 CCC 컨버터, CSCC 컨버터 및 전형적인 전류형 컨버터에 대해 분석하고, 계통의 안정도 측면에서 PSCAD/EMTDC로 CCC 컨버터의 HVDC를 모의함으로써 신뢰성이 높음을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.863-866
• /
• 1993

The output power of photovoltaic(PV) system is fluctuating due to the change in the insolation and temperature and etc. This problem can be overcome if the system is connected to storage batteries and the power system. According to, this paper propoes line-commutated photovoltaic inverter system. It has been experimentally verified that and maximum power can be obtained by varing the firing angle.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.189-202
• /
• 2019

During thermal power coal-fired boiler operation, it is very important to detect the pulverized coal concentration in the air pipeline for the boiler combustion stability and economic security. Because the current measurement methods used by power plants are often involved with large measurement errors and unable to monitor the pulverized coal concentration in real-time, a new method is needed. In this paper, a new method based on microwave circular waveguide is presented. High Frequency Electromagnetic Simulation (HFSS) software was used to construct a simulation model for measuring pulverized coal concentration in power plant pipeline. Theoretical analysis and simulation experiments were done to find the effective microwave emission frequency, installation angle, the type of antenna probe, antenna installation distance and other important parameters. Finally, field experiment in Jilin Thermal Power Plant proved that with selected parameters, the measuring device accurately reflected the changes in the concentration of pulverized coal.

• 한국항공우주학회지
• /
• 제44권4호
• /
• pp.324-332
• /
• 2016

본 논문에서는 최소센서 조합만을 이용하는 관측각 제어기반 종말유도조종 루프의 설계방안에 대하여 제안하였다. 조종루프에서 필요한 동체자세각속도 피드백 대신 관측각속도 피드백을 적용함과 동시에 종말유도법칙으로 관측각 제어법칙을 적용함으로써 1축 각 속도계와 스트랩다운 탐색기만으로 유도조종루프의 구성이 가능하도록 하였다. 또한 탐색기에서 출력되는 관측각에 시간지연이 있더라도 유도루프의 안정성을 유지할 수 있도록 지연여유를 고려하여 유도루프를 설계하였다. 본 논문에서 제안하는 종말유도조종 루프를 검증하기 위하여 6자유도기반 비선형시뮬레이션을 구성하였고, 몬테카를로 시뮬레이션을 통하여 다양한 불확실성 요소를 고려하여 유도조종루프의 강건성을 검증하였다.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.75-80
• /
• 2016

Ink-jet printing has become a widespread technology with the society's increase in aesthetic awareness. Especially, ink-jet printing using glazed ceramic ink can offer huge advantages including high quality decoration, continuous processing, glaze patterning, and direct reproduction of high resolution images. Recently, ceramic ink-jet printing has been rapidly introduced to decorate the porcelain product and the ceramic tiles. In this study, we provide an effective method to apply ceramic ink-jet decorations on the glass substrates using a oleophobic coating with perfluorooctyl trichlorosilane. The ink-jet printed patterns were much clearer on the oleophobically coated glass surface than the bare glass surface. The contact angle of the ceramic ink was maximized to the value of $64.0^{\circ}$ on the glass surface, when it was treated with 1 vol% PFTS solution for 1 min. The effects of the printing conditions and firing process on the ink-jet printed patterns on the oleophobically coated glass were also investigated.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.209-216
• /
• 2014

The screen printed technique is one of the electrode forming technologies for crystalline silicon solar cell. It has the advantage that can raise the production efficiency due to simple process. The electrode technology is the core process because the electrode feature is given a substantial factor (for solar cell efficiency). In this paper, we tried to change conditions such as squeegee angle $55{\sim}75^{\circ}$, snap off 0.5~1.75 mm, printing pressure 0.6~0.3 MPa and 1.6~2.0 mm finger spacing. As a result, the screen printing process showed an improved performance with an increased height higher finger height. Optimization of fabrication process has achieved 17.48% efficiency at screen mesh of 1.6 mm finger spacing.