• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.83-88
• /
• 2004

In order to assess the potential of the hydroxy-containing polyamic acid (PHAA) synthesized from 3,3'-dihydroxy benzidine and pyromellitic dianhydride for a fire-safe polymer, the cyclization pathway of PHAA has been investigated using a model compound prepared from 2-aminophenol and phthalic anhydride. The reaction was monitored. by $^1{H-nuclear}$ magnetic resonance. N-(2-hydroxyphenyl) phthalamic acid is converted to N-(2-hydroxyphenyl) phthalimide at ca. 175$^{\circ}C$, showing endothermic reaction. The imide structure is rearranged to the benzoxazole structure over ca. $400^{\circ}C$. These results are similar with that of PHAA. According to pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) data, water and carbon dioxide are released during the cyclization and rearrangement reaction. One DMAc molecule is complexed with one carboxyl acid group in PHAA, which accelerates the imidization process to release more easily the flame retardant, water.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.75-83
• /
• 2013

This paper presents a series of test result in order to study fire resistance capacity of the Near-Surface-Mounted (NSM) Carbon Fiber Reinforced Polymer (CFRP) plate, which are tensile test of CFRP under various temperature loading, temperature loading test of epoxy and bond test of NSM CFRP to concrete under various temperature loading. From the tests, it was found that NSM retrofit method had high efficiency in strengthening concrete under ordinary temperature. However, the strength of the system was able to be drastically decreased even a little increase of surrounding temperature. Especially, bond capacity begins to disappear when the surrounding temperature approaches the glass transition temperature of epoxy. Therefore, it is necessary to improve the fire resistance capacity of both fiber reinforced polymer reinforcement and epoxy for bonding in order to develop safe fire resistance design of structure.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.467-472
• /
• 2005

Asphalt emulsion is manufactured by the emulsification of asphalt, and is considered as an energy-saving, ecologically safe material because it does not need any heating processes with gas emission and fire hazard in its use. This study is concerned with evaluating the feasibility of the use of an asphalt emulsion as a poly-meric admixture. Asphalt-modified mortars using an experimentally manufactured asphalt emulsion were prepared with various polymer-cement ratios, and tested far the mechanical properties such as strengths and adhesion and the properties related to durability such as water absorption, permeation, carbonation and chloride ion penetration. As a result, the waterproofness, carbonation resistance and chloride ion penetration resistance of the asphalt-modified mortars were markedly improved with an increase in the polymer-cement ratio, but their compressive strength and adhesion to mortar substrates were reduced with increasing polymer-cement ratio. Therefore, it is recommended to control their polymer-cement ratio to be $10\%$ or lower in their practical applications. Further study to improve their compressive strength and adhesion is needed.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.177-185
• /
• 2007

Polyamic acid(PAA)/organoclay nanocomposites containing phosphorous were prepared by solution blending of phosphorylated PAA(PPAA) and organically modified montmorillonite(O-MMT) as a type of layered clays. The nanocomposites were characterized by FT-IR, DSC, TGA, PCFC, SEM, and XRD. The preparation of nanocomposites was confirmed by FT-IR and XRD. SEM pictures showed that the organoclay was dispersed well in the PAA matrix relatively. XRD results indicated that the O-MMT layers were intercalated. The thermal stability and flame retardancy of O-MMT/PPAA nanocomposites were higher than those of pure PAA. PCFC results also showed that the heat release capacity and total heat release values of O-MMT 4 wt%/PPAA-0.2, 0.4, 0.6 composites were decreased with increasing the mole ratio of phosphorous. It was found that the nanocomposite films had the potential to be used as a fire safe material.