• 센서학회지
• /
• 제23권5호
• /
• pp.337-341
• /
• 2014

For various additives doped-$VO_2$ critical temperature sensors using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were systematically investigated. As a starting material of $VO_2$ sensor, vanadium pentoxide ($V_2O_5$) powders were used, and CaO, SrO, $Bi_2O_3$, $TiO_2$, and PbO dopants were used, respectively. The $V_2O_5$ powders with dopants were mixed with a vehicle to form paste. This paste was silk screen-printed on $Al_2O_3$ substrates and then $V_2O_5$-based thick films were heat-treated at $500^{\circ}C$ for 2 hours in $N_2$ gas atmosphere for the reduction to $VO_2$. From X-ray diffraction analysis, $VO_2$ phases for pure $VO_2$, and CaO and SrO-doped $VO_2$ thick films were confirmed and their grain sizes were 0.57 to $0.59{\mu}m$. The on/off resistance ratio of the $VO_2$ sensor in phase transition temperature range was $5.3{\times}10^3$ and that of the 0.5 wt.% CaO-doped $VO_2$ sensor was $5.46{\times}10^3$. The presented critical temperature sensors could be commercialized for fire-protection and control systems.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.66-72
• /
• 2011

This is the fourth of a series of companion papers dealing with the mechanical property reductions of various marine structural steels. Even though a reduction of the elastic modulus according to temperature increases has not been obtained from experiments, high temperature experiments from room temperature to $900^{\circ}C$ revealed that initial the yield strength and tensile strength are both seriously degraded. The mechanical properties obtained from high temperature experiments are compared with those from EC3 (Eurocode 3). It is found that the high temperature test results generally comply with the prediction values by EC3. Based on the prediction of EC3, time domain nonlinear finite element analyses were carried out for a blast wall installed on a real FPSO. After applying the reduced mechanical properties, corresponding to $600^{\circ}C$ to the FE model of the blast wall, more than three times the deflections were observed and it was observed that most structural parts experience plastic deformations exceeding the reduced yield strength at the high temperature. It is noted that a protection facility such as PFP (passive fire protection) should be required for structures likely to be directly exposed to fire and explosion accident.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.161-172
• /
• 2014

Hydrogen, which can be produced from abundant and widely distributed renewable energy resources, seems to be a promising candidate for solving the concerns for improving energy security, urban air pollution, and reducing greenhouse gas emissions. The two primary motivating factors for hydrogen economy are fossil fuel supply limitations and concerns about global warming. But the safety issues associated with hydrogen economy need to be investigated and fully understood before being considered as a future energy source. Limited operating experience with hydrogen energy systems in consumer environments is recognised as a significant barrier to the implementation of hydrogen economy. To prevent unnecessary restrictions on emerging codes, standards and local regulations, safety policies based on real hazards should be developed. This article studies briefly the direct impact-distances from hazard events such as hydrogen release and jet fire, and damage levels from hydrogen gas explosion in a confined space. Based on the direct impact-distances indicated in the accident scenarios and consumer environments in Korea, the safety policies, which are related to hydrogen filling station, hydrogen fuel cell car, portable fuel cell, domestic fuel cells, and hydrogen town, are suggested to implement hydrogen economy. To apply the safety policies and overcome the disadvantages of prescriptive risk management, which is setting guidance in great detail to management well known risk but is not covering unidentified risk, hybrid risk management model is also proposed.

• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.70-76
• /
• 2019

본 연구에서는 임계온도스위치를 이용하여 저전력 단독경보형 정온식 감지기를 개발하였다. 임계온도스위치는 70 ℃에서 저항이 급격하게 감소하는 특성을 나타내는 소자로, 금속-절연체 전이 현상을 이용함으로써 온도 측정에 대한 높은 신뢰성을 보장한다. 또한 임계온도스위치의 금속에서 절연체로 변하는 디지털적인 특성을 이용하여 마이크로컨트롤러 사용 없이 화재를 감지함으로써 단독경보형 정온식 감지기의 소비 전력을 최소화하였다. 시험결과 임계온도스위치를 이용한 단독경보형 정온식 감지기는 소방청 고시 단독경보형 정온식 감지기 시험 조건을 만족했으며, 소비 전력을 측정한 결과 기존 제품 대비 70%의 전력만으로 화재를 감지함을 확인하였다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.17-28
• /
• 2017

Although concrete is a noncombustible material, high temperatures such as those experienced during a fire have a negative effect on the mechanical properties. This paper studies the effect of elevated temperatures on the mechanical properties of limestone, quartzite and granite concrete. Samples from three different concrete mixes with limestone, quartzite and granite coarse aggregates were prepared. The test samples were subjected to temperatures ranging from 25 to $650^{\circ}C$ for a duration of 2 h. Mechanical properties of concrete including the compressive and tensile strength, modulus of elasticity, and ultimate strain in compression were obtained. Effects of temperature on resistance to degradation, thermal expansion and phase compositions of the aggregates were investigated. The results indicated that the mechanical properties of concrete are largely affected from elevated temperatures and the type of coarse aggregate used. The compressive and split tensile strength, and modulus of elasticity decreased with increasing temperature, while the ultimate strain in compression increased. Concrete made of granite coarse aggregate showed higher mechanical properties at all temperatures, followed by quartzite and limestone concretes. In addition to decomposition of cement paste, the imparity in thermal expansion behavior between cement paste and aggregates, and degradation and phase decomposition (and/or transition) of aggregates under high temperature were considered as main factors impacting the mechanical properties of concrete. The novelty of this research stems from the fact that three different aggregate types are comparatively evaluated, mechanisms are systemically analyzed, and empirical relationships are established to predict the residual compressive and tensile strength, elastic modulus, and ultimate compressive strain for concretes subjected to high temperatures.

• 한국멀티미디어학회논문지
• /
• 제9권11호
• /
• pp.1503-1514
• /
• 2006

오늘날 대부분의 고객들이 어디에서든지 인터넷을 사용할 수 있게 됨에 따라, 대부분의 기업들이 자신들의 서비스를 인터넷상에서 제출하게 되었다. 그 결과 무수히 많은 웹 서비스 시스템이 이미 인터넷상에서 서비스를 하고 있으며 더 많은 시스템들이 구축 중이다. 그래서 구축 중인 시스템이 교착상태와 같은 문제점이 없이 성공적으로 실행될 것이라는 것을 설계 초기 단계에 검증하는 방법에 대한 연구가 많이 수행되어 왔다. 페트리 넷을 이용하는 방법들도 몇 가지 소개되었는데, 이들은 웹 서비스 시스템을 페트리 넷으로 표현하는 방법에 주안점을 두고 있으며, 효율적인 분석 방법에 대한 연구는 부족한 실정이다. '최소 순회 시간' 방법은 '시간 넷'(Timed Net)에서 모든 트랜지션(transition)들을 최소한 한번 이상 격발하고 초기 마킹으로 되돌아오는데 걸리는 최소 시간을 찾아주는 수학적 방법으로, 컴퓨터 시스템 분석에 널리 사용된다. 시간 넷은 트랜지션에 지연 시간이 연합된 변형된 페트리 넷으로. 실세계에서의 지연시간은 확률적임에도 불구하고 기존의 시간 넷에서는 상수가 사용된다. 본 논문은 사건의 실행 시간이 화률 분포를 이루는 '혼합 분포 확률 시간 넷'을 제안하고 '혼합 분포 확률 시간 넷'의 최소 순회 시간 분석 방법을 소개한다. 또한 '혼합 분포 확률 시간 넷'의 최소순회시간 분석을 이용하여 웹 서비스 시스템의 응답 시간을 분석하는 방법을 보인다.

• 한국멀티미디어학회논문지
• /
• 제9권5호
• /
• pp.671-680
• /
• 2006

'최소 순회 시간’ 방법은 ‘시간 넷’(Timed Net)에서 모든 변천(transition)들을 최소한 한번 이상 격발하고 초기 마킹으로 되돌아오는데 걸리는 최소 시간을 찾아주는 수학적 방법으로, 컴퓨터 시스템 분석에 널리 사용된다. 시간 넷은 변천에 지연 시간이 연합된 변형된 페트리 넷으로 실세계의 사건이 실행되는데 걸리는 시간이 일반적으로 확률적 시간인데 반하여 시간 넷에 사용되는 지연시간은 상수이기 때문에 최소 순회 시간 방법에 의한 분석 결과는 현실성이 부족하다. 그래서 본 논문은 사건의 실행 시간을 확률적 숫자로 표현하는 ‘확률적 시간 넷'을 제안하고 ‘확률적 시간 넷'의 최소 순회 시간 분석 방법을 소개한다. 또한 ‘확률적 시간 넷’의 적용 예로 위치 기반 서비스를 제공하는 멀티미디어 시스템을 ‘확률적 시간 넷’으로 모델링하고 분석한다. 기존의 최소 순회 시간 분석 결과의 전형적인 형태는 '최소 10 단위 시간 이상 걸린다'와 같은 형태인데 반하여 ‘확률적 시간 넷’의 분석 결과의 형태는 '10 단위 시간 이내일 확률이 85% 이다.'와 같은 확률적 형태이다.

• 한국컴퓨터정보학회논문지
• /
• 제26권2호
• /
• pp.99-108
• /
• 2021

본 연구는 소방공무원이 인식하는 여성 소방공무원 긴급자동차 운전직 전환에 대한 인식유형 연구이다. 본 연구의 목적은 소방공무원의 여성 소방공무원 긴급자동차 운전직 순환보직에 대한 인식을 파악하고 유형별 특성을 확인하여 여성 소방공무원의 긴급자동차 운전직 업무의 활용과 개발 방안을 모색하기 위한 기초자료를 마련하고자 실시하였다. 27개의 진술문으로 된 Q표본을 소방공무원 여자 26명, 남자 5명으로 총 31명에게 적용하여 QUANL program으로 자료를 분석한 분류 결과로 3개 유형은 전체변량의 60.8 %를 설명하고 각 유형별 설명력은 제I유형은 50 %, 제II유형은 5.6 %, 제III유형은 5.2 %로 나타났다. 제I유형은 '페미니스트형', 제II유형은 '미래지향형', 제III유형은 '교육준비형'으로 명명하였다. 전체적으로 여성소방공무원의 긴급자동차 인식은 성별로 인해 발생하는 차별을 없애야 하고 여성 소방공무원도 준비와 체계적인 교육이 이루어진다면 충분히 긴급자동차를 운전할 수 있다고 긍정적으로 조사되어 양성평등과 체계적인 교육프로그램 제공으로 개인 능력 개발이 필요하다.

• 건축역사연구
• /
• 제23권4호
• /
• pp.7-17
• /
• 2014

This paper aims at researching the cave concept of the Japanese architect Terunobu Fujimori and the result could be summarised as follows. First, a cave is Fujimori's only theme related to the interior space. He set some design guidelines for practice concerning openings of the wall and finishing materials of the interior, following the two major characteristics of a cave: 'comfortability' and 'homogeneity in material'. And 'fire' was also the premise in the cave as a 'spirit' of the space. Second, Fujimori applied the concrete guidelines to Tanpopo House (1994~95), which had in fact borne the ideas. Yakisugi House (2005~07) that took the cave as its design theme showed the transition of his cave concept, from closedness to openness. Third, though his cave concept might deserve the criticism that it is inclined to 'image' rather than 'essence', it illustrates that he seeks after an archetype of human dwelling before the purity of the original space was tarnished with rationality and abstraction. And the cave idea allows the seemingly contradictory 'sachlich' and 'surrealistic' features to coexist. Summing up, Fujimori's cave concept proves that his architecture is a rejection of the Cartesian modernist ideal and the contemporary architects' desire for dematerialisation. In a fundamental level, however, it is a result of his strategic choice induced by his own primary principle that his building must not be similar to any styles in history or any other architects' works in the world.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.325-342
• /
• 2014

The use of lightweight aggregate (LWA) instead of ordinary aggregate may make lightweight aggregate concrete, which possesses many advantages such as lightweight, lower thermal conductivity, and better fire and seismic resistance. Recently the developments of LWA have been focused on using industrial wastes as raw materials to reduce the use of limited natural resources. In view of this, the intent of this study was to apply Taguchi optimization technique in determining process condition for producing synthetic LWA by incorporating waste thin film transition liquid crystal displays (TFT-LCD) glass powder with reservoir sediments. In the study the waste TFT-LCD glass cullet was used as an additive. It was incorporated with reservoir sediments to produce LWA. Taguchi method with an orthogonal array L16(45) and five controllable 4-level factors (i.e., cullet content, preheat temperature, preheat time, sintering temperature, and sintering time) was adopted. Then, in order to optimize the selected parameters, the analysis of variance method was used to explore the effects of the experimental factors on the performances (particle density, water absorption, bloating ratio, and loss of ignition) of the produced LWA. The results showed that it is possible to produce high performance LWA by incorporating waste TFT-LCD glass cullet with reservoir sediments. Moreover, Taguchi method is a promising approach for optimizing process condition of synthetic LWA using recycled glass cullet and reservoir sediments and it significantly reduces the number of tests.