• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.377-380
• /
• 2012

대피 및 인명피해 시뮬레이션 기술은 성능위주 설계의 핵심 기술 중 하나이다. 기존 해외에서 개발된 프로그램들은 단순한 인명피해 계산 방식과 비주얼의 조악으로 한계성을 나타내고 있다. 본 연구에서 개발된 대피 및 인명피해 평가 프로그램은 기존의 프로그램의 한계점을 극복함과 동시에 다음의 관련 기술을 향상시키고 실제 사례에 적용하여 현재 사용되고 있는 상용 대피 프로그램과 비교/검증하였다. 첫째, 피난계단 뿐만 아니라 엘리베이터를 이용하여 대피할 수 있는 알고리즘을 적용하였다. 둘째, 미국 표준연구소(NIST)의 화재해석 프로그램 (FDS, Fire Dynamics Simulator)과 연계(Coupled)를 통해 화재에 의한 인명피해 발생여부 판단이 가능한 프로그램이다. 마지막으로 그래픽 전용 모듈을 적용하여 현실에 가까운 3차원 가상현실을 구현하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.327-332
• /
• 2009

2005년 발코니 확장이 합법화 된 이후로 공동주택인 아파트의 지속적인 증가와 재개발및 재건축이 이루어짐에 따라 상층부의 화재확대를 차단하는 발코니를 확장하는 세대가 증가하고 있으며, 기존의 아파트 또한 불법 발코니 확장을 하는 사례가 늘어나고 있다. 따라서 본 연구는 발코니의 화재 안전에 대한 역할의 중요성을 부각시키고자, 발코니유 무에 따른 상층부의 개구분출열기류확산실험을 모형실험을 통해서 실시 한 후 'NIST'에서 개발 된 FDS(Fire Dynamics Simulator)를 사용해 해석하였다. 실험과 FDS해석, 그리고 Trajectory를 비교하여, 종횡비에 따른 1:1인 창과 횡장창과 종장창에 대해 서로 다른 분출열기류를 보이는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.410-423
• /
• 2019

Fire suppression using a water mist nozzle directly above an n-Heptane pool in a fire compartment with a door opening was numerically investigated using the Fire Dynamics Simulator (FDS) for the purpose of application in nuclear power plants. Input parameters for the numerical simulation were determined by experimental measurements. Water mist was activated 10 s after the fire began. The sensitivity analysis was conducted for three input parameters: total number of cubic cells of 6032-2,926,400, droplets per second of 1000-500,000, and extinguishing coefficient of 0-100. In a new simple calibration method of this study, the extinguishing coefficient yielding the fire suppression time closest to that measured by experiments was found for use as the FDS simulation input value. When the water mist jet flow made contact with the developed fire, the heat release rate instantaneously increased, and then rapidly decreased. This phenomenon occurred with a displacement of the flame near the liquid fuel pool. Changing the configuration of the door opening with different aspect ratios and opening ratios had impact on the maximum value of the heat release rate due to the flame displacement.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.6-10
• /
• 2013

A numerical reproducibility of the backdraft phenomena in a compartment was investigated. The prediction performance of two combustion models, the mixture fraction and finite chemistry models, were tested for the backdraft phenomena using the FDS code developed by the NIST. The mixture fraction model could not predict the flame propagation in a fuel-air mixture as well as the backdraft phenomena. However, the finite chemistry model predicted the flame propagation in the mixture inside a tube reasonably. In addition, the finite chemistry model predicted well the backdraft phenomena in a compartment qualitatively. The flame propagation inside the compartment, fuel and oxygen distribution and explosive fire ball behavior were well simulated with the finite chemistry model. It showed that the FDS adopted with the finite chemistry model can be an effective simulation tool for the investigation of backdraft in a compartment.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.1-8
• /
• 2019

In this study, the effects of the characteristics of droplets of water spray on suppression of fire were analyzed numerically using fire dynamics simulator (FDS) 6.5.2. Additionally, the fire suppression characteristics by the water spray nozzle, including the extinguishing coefficient (EC), droplet size distribution function (SDF), median volumetric diameter (MVD), and droplets per second (DPS), were evaluated in terms of the decreasing normalized heat release rate (HRR) curve and cooling time. It was observed that with increase in the EC, the normalized HRR curve decreased rapidly, and the changing MVD affected the suppression of fire. In case of mono-disperse, the normalized HRR curve decreased slowly with the increase in DPS. On the contrary, in case of multi-disperse, the normalized HRR curve decreased rapidly even with a small increase in DPS.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.7-16
• /
• 2018

In this study, the previous design fire curve for fire simulation was modified and re-suggested. Numerical simulations with the FDS and CFAST were performed for the n-heptane and n-octane pool fires in the ISO 9705 compartment to evaluate the prediction performances of the previous 1-stage and modified 2-stage design fire curves. The numerical results were compared with the experimental temperature and concentrations of $O_2$ and $CO_2$. The FDS and CFAST simulations with the 2-stage design fire curve showed better prediction performance for the variation of temperature and major species concentration than the simulations with 1-stage design fire curve. Especially, the simulations with the 2-stage design fire curve agreed with the experimental temperature more reasonably than the results with the 1-stage design fire curve. The FDS and CFAST simulations showed good prediction performance for the temperature in the upper layer of compartment and the results with the FDS and CFAST were similar to each other. However, the FDS and CFAST showed poor and different prediction performance for the temperature in the lower layer of compartment.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.190-191
• /
• 2017

본 연구는 산림 공간에서 산불소화시설인 수관수막타워의 방수시간에 따른 화재에 미치는 영향을 FDS(Fire Dynamics Simulator, 화재시뮬레이션)로 비교하였다. 본 연구를 진행하기 위한 기본 조건은 수관수막타워 높이 20m, 방수길이 40m, 방수량 400Lpm으로 해석공간 상에 수막타워를 3기 설치하였다. 수관수막타워 작동 초반 화재온도 $668.5^{\circ}C$에서 작동 450초 후 $145.6^{\circ}C$으로 감소되는 효과를 볼 수 있다. 이는 '산불소화시설 설치 및 운영 관리 지침'의 제3조 11절 6항의 '수관수막설비는 산불 접근 예상시간보다 10분전에 가동되도록 해야 한다.'의 타당성을 마련할 수 있다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2101-2108
• /
• 2008

Most of train fires which occur in usual cases do not grow up significantly on a large scale enough to bring about casualties and harmful damages. However, the consequence of some train fire accidents can be devastating disaster so that it would be even recorded in history in unusual cases. Accordingly, such a probability of fire disaster cannot be ignored in aspect of the railway safety assesment. A scale of injury and damage is very difficult to predict and analyze. Because it is depend on various factors, i.e. fire load, burning period, facilities, environment condition, and so on. Thus, a prediction of fire load could be understood as a one methodology to estimate railway safety assesment. The summation method which is one of them is used to evaluate the overall fire load by assuming that sum of heat release rate per unit area or mass of each composite material equals the total. However, since the train fire is classified into a compartment fire in under-ventilation condition. The summation method do not estimate a fire load completely. In this journal, Various methods to predict fire load are introduced and evaluated. Especially the fire simulation tool FDS(Fire Dynamics Simulator)which is based on the CFD(Computational Fluid Dynamics) is introduced, too. Through the FDS simulation, numerical analyses for the fire load and flame spread are performed. Then, these results of the simulation are validated through the comparison study with the experimental data. Then, limitations and approximations including in simulation process are discussed. The future direction of research is proposed.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.144-150
• /
• 2016

An apartment house with a pilotis that raises the architectural volume and provides a space for circulation is becoming popular. With the popularity of pilotis in apartment houses, people also have a keen interest in the potential fire risk at the pilotis. As residents can only access their apartment house through the pilotis, there is a risk to the occupants if there is fire there. Therefore, this study evaluated the pilotis fire cases of urban multifamily housing to conduct a Fire Dynamics Simulator (FDS) and Fire Evacuation Simulation (FES). Through these two simulation methods, it is possible to validate the riskiness of fire at an apartment with a pilotis. The study identified that the toxic gases and flame spread out to the pilotis within hundred seconds after ignition. In addition, the toxic gases and flame also reach the second floor within three seconds and the entire building within 735 seconds if the entrance doors at the pilotis are opened. On the other hand, the FES simulation results showed that it also takes about approximately 609 seconds to excavate from the apartment house with a pilotis. Therefore, this research shows that an apartment house with a pilotis can ensure the building occupants' lives and their safety if there is fire.

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.216-220
• /
• 2008

Water mist fire suppression system utilizes the fire suppression features such as cooling of fire source, dilution of ambient oxygen, and shielding of radiation heat with the evaporation of microscopic water droplets. The momentum of water mist is relatively lower than that of larger water droplet and the infiltration of water mist to the fire source is not effective. Contribution of evaporated water vapor is liable to decline to limited portion of fire source due to its light weight and sparse density. On the other hand, the cycling water mist pattern is expected to improve the penetration force of water mist as well as the air expelling capability with the stratified spray characteristics. At this paper, we present the analyzed fire suppression capability of intermittent water spray pattern by use of FDS which is computational fire dynamics fire model. We expect this analysis can support the basic concept to the development of the prototype of water mist nozzle.