• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.68-73
• /
• 2011

This study was performed numerical analysis in order to analyze liquid film flow of heat exchanger tube arrangement and configuration of evaporative multi effect distillation system using medium-temperature. Simulation was accomplished the two-dimensional calculations using commercial analyses program FLUENT based on the FVM(finite volume method). Fresh water generator of this study used Shell & Tubes heat exchanger with Cu_Ni tube, configuration of tube used bare tube and corrugated tube, and arrangement of tube used in-line array and staggered array. Performance of heat exchanger through the formation of liquid film was compared and analyzed. Liquid film flow occurred that falling on heat exchanger tube wall. Result of simulation showed that liquid film thickness of in-line arrangement was found 0.57mm with bare tube and 0.67mm with corrugated tube, respectively. And liquid film thickness of staggered arrangement was found 0.39mm with bare tubes and 0.62mm with corrugated tubes, respectively. Liquid film thickness of corrugated tube showed thicker than bare tube, but heat transfer rates of corrugated tube showed higher than bare tube. The reason was considered that surface area of corrugated tube was wider than bare tube. And liquid film thickness of staggered arrangement showed thinner than in-line arrangement, so thermal performance of staggered arrangement showed higher than in-line arrangement.

• 대한의용생체공학회:의공학회지
• /
• 제18권2호
• /
• pp.187-196
• /
• 1997

The three-dimensional flow analysis using the finite volume method is presented to compare the steady flow characteristics of blood with those of blood substitutes such as water and aqueous polymer solution in an idealized double branching model. The model is used to simlllate the region of the abdominal aorta near the celiac and superior mesenteric branches. Apparent viscosities of blood and the aqueous Separan solution are represented as a function of shear rate by the Carreau model, Water and aqueoiu Separan AP-273 500wppm solution are frequently used as blood substitutes in vitro experiments. Water is a typical Newtonian fluid and blood and Separan solution are non-Newtonian fluids. Flow phenomena such as velocity distribution, pressure variation and wall shear stress distribution of water, blood and polymer solution are quite different due to differences of the rheological characteristics of fluids. Flow phenomena of polymer solution are qualitatively similar to those of blood but the phenomena of water are quite different from those of blood and polymer solution. It is recommended that a lion-Newtonian fluid which exhibits very similar rheological behavior to blood be used in vitro experiments. A non-Newtonian fluid whose rheological characteristics are very similar to those of blood should be used to obtain the meaninylll hemodynamic data for blood flow in vitro experiment and by numerical analysis

• 한국추진공학회지
• /
• 제9권1호
• /
• pp.35-45
• /
• 2005

여러 고도에서 화학 반응과 열복사 효과가 로켓 플룸 유동에 미치는 영향을 살피기 위한 수치 연구를 수행하였다. 압축성 유동의 Navier-Stokes 방정식을 유한 체적법에 근거한 완전 내재적 TVD코드로 해석하였으며, 탄화수소 혼합물의 자세한 열화학적 속성을 고려한 화학 평형과 광학적으로 두꺼운 매체의 열복사를 유동 해석 코드에 포함하였다. 지상 마하수 0, 고도 5.06 km에서 마하수 1.16 그리고 17.34 km에서 마하수 2.90로 비행하는 등유 연료 로켓의 플룸 유동을 해석하였다. 해석 결과는 서로 다른 고도 조건에서의 플룸의 구조와 함께 화학 반응과 복사의 영향을 보여 주었다. 추진 성능과 기저부 열차단의 측면에서, 화학 반응에 의한 배출가스의 온도 상승은 특히 고고도에서 무시할 수 없음을 알 수 있었다.

• 한국지구과학회지
• /
• 제35권5호
• /
• pp.342-353
• /
• 2014

Data for model analysis derived from the finite volume (fv) GCM (Goddard Earth Observing System Ver. 4, GEOS-4) and the Land Data Assimilation System (LDAS) have been utilized in a mesoscale model. These data are tested to provide initial conditions and lateral boundary forcings to the Purdue Mesoscale Model (PMM) for a case study of the Midwestern flood that took place from 21-23 May 1998. The simulated results with fvGCM and LDAS soil moisture and temperature data are compared with that of ECMWF reanalysis. The initial conditions of the land surface provided by fvGCM/LDAS show significant differences in both soil moisture and ground temperature when compared to ECMWF control run, which results in a much different atmospheric state in the Planetary Boundary Layer (PBL). The simulation result shows that significant changes to the forecasted weather system occur due to the surface initial conditions, especially for the precipitation and temperature over the land. In comparing precipitation, moisture budgets, and surface energy, not only do the intensity and the location of precipitation over the Midwestern U.S. coincide better when running fvGCM/LDAS, but also the temperature forecast agrees better when compared to ECMWF reanalysis data. However, the precipitation over the Rocky Mountains is too large due to the cumulus parameterization scheme used in the PMM. The RMS errors and biases of fvGCM/LDAS are smaller than the control run and show statistical significance supporting the conclusion that the use of LDAS improves the precipitation and temperature forecast in the case of the Midwestern flood. The same method can be applied to Korea and simulations will be carried out as more LDAS data becomes available.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.454-462
• /
• 2015

An extended study was conducted on the fracture criterion by Choung et al. (2011; 2012) and Choung and Nam (2013), and the results are presented in two parts. The theoretical background of the fracture and the results of new experimental studies were reported in Part I, and three-dimensional fracture surface formulations and verifications are reported in Part II. How the corrected true stress can be processed from the extrapolated true stress is first introduced. Numerical simulations using the corrected true stress were conducted for pure shear, shear-tension, and pure compression tests. The numerical results perfectly coincided with test results, except for the pure shear simulations, where volume locking appeared to prevent a load reduction. The average stress triaxialities, average normalized lode parameters, and equivalent plastic strain at fracture initiation were extracted from numerical simulations to formulate a new three-dimensional fracture strain surface. A series of extra tests with asymmetric notch specimens was performed to check the validity of the newly developed fracture strain surface. Then, a new user-subroutine was developed to calculate and transfer the two fracture parameters to commercial finite element code. Simulation results based on the user-subroutine were in good agreement with the test results.

• 천문학회보
• /
• 제39권1호
• /
• pp.70.2-70.2
• /
• 2014

We developed a three-dimensional (3D) magnetohydrodynamic (MHD) simulation code to reproduce the structure of a solar wind and the propagation of a coronal mass ejection (CME) through it. This code is constructed by a finite volume method based on a total variation diminishing (TVD) scheme using an unstructured grid system (Tanaka 1994). The grid system can avoid the singularity arising in the spherical coordinate system. In this study, we made an improvement of the code focused on the propagation of a CME through a solar wind, which extends a previous work done by Nakamizo et al. (2009). We first reconstructed a solar wind in a steady state from physical values obtained at 50 solar radii away from the Sun via an MHD tomography applied to interplanetary scintillation (IPS) data (Hayashi et al. 2003). We selected CR2057 and inserted a spheromak-type CME (Kataoka et al. 2009) into a reconstructed solar wind. As a result, we found that our simulation well captures the velocity, temperature and density profiles of an observed solar wind. Furthermore, we successfully reproduce the general characteristics of an interplanetary coronal mass ejection (ICME) obtained by the Helios 1/2 spacecraft (R. J. FORSYTH et al. 2006).

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.65-75
• /
• 2004

본 연구는 토목섬유 보강토 구조물의 보강 메카니즘을 규명하고자 하는 목적으로 실시하였으며, 여기서 보강 메카니즘은 전단에 의한 다짐토의 체적 팽창(부의 다일러턴시)을 토목섬유에 의해 구속 억제하는 과정에서 생성되는 효과로 간주하고 있다. 실물 현장시험은 일본 Kanazawa(1994)에서 실시했으며, 실내시험으로는 등체적 전단시험을 실시하여 강도 및 변형특성을 조사하였고, 시험결과를 이용하여 유한요소해석에 필요한 재료 파라메타를 결정하였다. 또한, 탄소성 유한요소 해석을 실시하여 이론치와 실험 결과치를 정량적으로 비교 분석되었으며, 그 결과 유한요소 해석이 현장 시험을 유용하게 설명할 수 있는 것을 알 수 있었다.

• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.55-66
• /
• 2012

This paper presents a dual modeling method that simulates the graphic and haptic behavior of a volumetric deformable object and conveys the behavior to a human operator. Although conventional modeling methods (a mass-spring model and a finite element method) are suitable for the real-time computation of an object's deformation, it is not easy to compute the haptic behavior of a volumetric deformable object with the conventional modeling method in real-time (within a 1kHz) due to a computational burden. Previously, we proposed a fast volume haptic rendering method based on the S-chain model that can compute the deformation of a volumetric non-rigid object and its haptic feedback in real-time. When the S-chain model represents the object, the haptic feeling is realistic, whereas the graphical results of the deformed shape look linear. In order to improve the graphic and haptic behavior at the same time, we propose a dual modeling framework in which a volumetric haptic model and a surface graphical model coexist. In order to inspect the graphic and haptic behavior of objects represented by the proposed dual model, experiments are conducted with volumetric objects consisting of about 20,000 nodes at a haptic update rate of 1000Hz and a graphic update rate of 30Hz. We also conduct human factor studies to show that the haptic and graphic behavior from our model is realistic. Our experiments verify that our model provides a realistic haptic and graphic feeling to users in real-time.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.139-149
• /
• 1994

A numerical simulation of unsteady axisymmetric turbulent flow was performed for a reciprocating engine including port/valve assembly. The governing equations based on a nonorthogonal coordinate formulation with Cartesian velocity components were used and discretised by the finite volume method with non-staggered variable arrangements. The modified $\kappa-\xi$. turbulence model which included the effect of compressibility was used. The results of twodimensional transient calculation for the axisymmetric configuration were compared with the experimental data. Although slightly low rms velocity was predicted compared to the experimental data, predicted velocity distributions at the valve exit and in-cylinder region showed good agreements with the experimental data. The flow at the valve exit was separated at the same valve lift position with the experimental data. Two vortices incylinder region were generated during the initial intake process. The clockwise main vortex became strong and moved upward to the top wall. The counter-clockwise second vortex became weak and stick to the upper left corner of the cylinder. After middle intake process, new vortex adjacent to upper cylinder wall appeared by the piston motion and therefore, the in-cylinder flow was formed into three vortices. The cylinder pressure just before bottom dead center of piston was higher than inlet pressure and then the reverse flow occured at the valve exit. The in-cylinder flow characteristics were strongly dependent on piston motion, but insensitive to valve motion.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.763-771
• /
• 2011

본 연구에서는 환기용 축류송풍기에 대하여 효율을 목적함수로 하는 수치최적설계를 수행하였다. 유동해석은 삼차원 Reynolds-averaged Navier-Stokes(RANS) 방정식을 통하여 이뤄졌으며, 난류모델로는 Shear Stress Transport 모델을 사용하였다. 최적설계를 위한 설계변수로는 허브비, 날개의 중간 및 팁 스팬에서의 엇갈림각을 사용하였다. 실험계획법으로 라틴하이퍼큐브 샘플링 방법을 사용하여 설계영역 내에서 25개의 실험점을 추출하였다. 최적설계기법인 가중평균대리모델과 삼차원 RANS 해석을 결합하여 수치최적설계를 수행하였으며, 가중평균대리모델로는 WTA1, WTA2 및 WTA3 모델을 사용하였다. 수치 최적설계에 의해 얻어진 최적형상들의 성능을 기준형상과 비교하였으며, 성능이 가장 좋은 모델에 대하여 기준형상과의 내부유동장 비교 및 분석을 통해 성능이 향상된 원인을 규명하였다.