• 한국표면공학회지
• /
• 제37권5호
• /
• pp.279-288
• /
• 2004

This paper describes a three-dimensional transient finite element model for a laser cladding process. In the model, an adaptive finite element technique is used for dilution control. Using the proposed finite element model, the effects of process parameters such as scanning speed, laser's power, and preheating on the dilution of clad layer, the shape of melting pool, and the temperature distribution are calculated. It is also shown that the optimal process parameters for the required dilution can be determined from the proposed finite element model. An experiment is performed to validate the proposed model. The numerical results are compared with experimental ones.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.303-315
• /
• 2017

This paper describes the finite element model for predicting the fundamental performance of embedded steel column base connections under monotonic and cyclic loading. Geometric and material nonlinearities were included in the proposed finite element model. Bauschinger and pinching effects were considered in the simulation of embedded column base connections under cyclic loading. The degradation of steel yield strength and accumulation of plastic damage can be well simulated. The accuracy of the finite element model is examined by comparing the predicted results with independent experimental dataset. It is demonstrated that the finite element model accurately predicts the behaviour and failure models of the embedded steel column base connections. The finite element model is extended to carry out evaluations and parametric studies. The investigated parameters include column embedded length, concrete strength, axial load and base plate thickness. Moreover, analytical models for predicting the initial stiffness and bending moment strength of the embedded column base connection were developed. The comparison between results from analytical models and those from experiments and finite element analysis proved the developed analytical model was accurate and conservative for design purposes.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1499-1506
• /
• 2001

Various transition elements are used in general for the effective finite element analysis of complicated mechanical structures. In this paper, a solid-to-beam transition finite element, which can b e used for connecting a C1-continuity beam element to a continuum solid element, is proposed. The shape functions of the transition finite element are derived to meet the compatibility condition, and a transition element equation is formulated by the conventional finite element procedure. In order to show the effectiveness and convergence characteristics of the proposed transition element, numerical tests are performed for various examples. As a result of this study, following conclusions are obtained. (1) The proposed transition element, which meets the compatibility of the primary variables, exhibits excellent accuracy. (2) In case of using the proposed transition element, the number of nodes in the finite element model may be considerably reduced and the model construction becomes more convenient. (3) This formulation method can be applied to the usage of higher order elements.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.589-595
• /
• 2000

Densification behavior of SiC powder was investigated under cold compaction. A special form of the Cap model was proposed from experimental data of SiC powder under triaxial compression. To compare with experimental data of SiC powder under cold compaction, the proposed constitutive model was implemented into a finite element program (ABAQUS). Finite element calculations from the Cam-Clay model and the modified Drucker-Prager model were also compared with experimental data of SiC powder. The agreements between experimental data and finite element results obtained from the proposed constitutive model are reasonably good. In die pressing, finite element results obtained from the Cam-Clay model and the modified Drucker-Prager model, however, show lower average density of SiC powder compacts compared to experimental data.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.143-148
• /
• 2006

It is still very difficult to generate a geometry model and finite element model, which has complex and many free surface, even though 3D CAD solutions are applied. Furthermore, in the medical field, which is a big growth area of recent years, there is no drawing. For these reasons, making a geometry model, which is used in finite element analysis, is very difficult. To resolve these problems and satisfy the requests of the need to create a 3D digital file for an object where none had existed before, new technologies are appeared recently. Among the recent technologies, there is a growing interest in the availability of fast, affordable optical range laser scanning. The development of 3D laser scan technology to obtain 3D point cloud data, made it possible to generate 3D model of complex object. To generate CAD and finite element model using point cloud data from 3D scanning, surface reconstruction applications have widely used. In the early stage, these applications have many difficulties, such as data handling, model creation time and so on. Recently developed point-based surface generation applications partly resolve these difficulties. However there are still many problems. In case of large and complex object scanning, generation of CAD and finite element model has a significant amount of working time and effort. Hence, we concerned developing a good direct finite element model generation method using point cloud's location coordinate value to save working time and obtain accurate finite element model.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.326-332
• /
• 2013

PURPOSE. The purpose of this study was to compare stress distributions of implant-supported crown placed in fibula bone model with those in intact mandible model using three-dimensional finite element analysis. MATERIALS AND METHODS. Two three-dimensional finite element models were created to analyze biomechanical behaviors of implant-supported crowns placed in intact mandible and fibula model. The finite element models were generated from patient's computed tomography data. The model for grafted fibula was composed of fibula block, dental implant system, and implant-supported crown. In the mandible model, same components with identical geometries with the fibula model were used except that the mandible replaced the fibula. Vertical and oblique loadings were applied on the crowns. The highest von Mises stresses were investigated and stress distributions of the two models were analyzed. RESULTS. Overall stress distributions in the two models were similar. The highest von Mises stress values were higher in the mandible model than in the fibula model. In the individual prosthodontic components there was no prominent difference between models. The stress concentrations occurred in cortical bones in both models and the effect of bicortical anchorage could be found in the fibula model. CONCLUSION. Using finite element analysis it was shown that the implant-supported crown placed in free fibula graft might function successfully in terms of biomechanical behavior.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.382-388
• /
• 2010

본 논문은 샌드위치 복합재가 적용된 철도차량 차체 구조물을 위한 표준유한요소모델을 제시하였다. 최근 샌드위치 복합재는 높은 굽힘 강성 및 강도를 가지며 차체의 경량화와 공간 확보를 통해 에너지 효율을 향상시킬 수 있어 국내의 많은 분야에서 널리 사용되고 있다. 그러므로 복합재 철도 차량의 제작 전에 유한요소법 등을 통해 구조안전성을 검증해야 한다. 본 연구에서는 다양한 철도차량의 실제 구조시험과 같은 수직, 압축, 비틀림 하중 및 고유진동수 해석을 통해 철도차량 구조물의 표준유한요소모델을 검증 제시하였다. 그 결과, 샌드위치 패널의 굽힘 강성을 향상시키기 위한 보강 금속 프레임에는 빔 요소보다는 사각 쉘 요소가 적절하였으며, 샌드위치 패널의 허니콤 코어와 적층복합재의 경우 적층 쉘 요소와 비교하여 적층 쉘 요소와 솔리드 요소를 사용하는 것이 적절하다. 또한, 제안된 표준유한요소모델은 유한요소모델의 수정 없이 충돌모델에 적용할 수 있는 장점을 가지고 있다.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.204-209
• /
• 2001

The finite element model for automotive muffler analysis is improved by modifying the boundary condition of outlet and the mesh of finite element model. The model minimizes the difference between transmission loss from analysis and that from experiment. Four different boundary conditions and the four types of finite element model are tested to find out the best one of those. From the case study it is verified that the bevel of transmission loss can be changed by the variation of radiation impedance value. Also the resonance or anti-resonance frequencies of transmission loss can be shifted by the variation of finite element mesh. An improved finite element model of muffler is proposed in consideration with the accuracy and the computing time of analysis.

• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.157-173
• /
• 2020

In the finite element modelling of long-span cable-stayed bridges, there are a lot of uncertainties brought about by the complex structural configuration, material behaviour, boundary conditions, structural connections, etc. In order to reduce the discrepancies between the theoretical finite element model and the actual static and dynamic behaviour, updating is indispensable after establishment of the finite element model to provide a reliable baseline version for further analysis. Traditional sensitivity-based updating methods cannot support updating based on static and dynamic measurement data at the same time. The finite element model is required in every optimization iteration which limits the efficiency greatly. A convenient but accurate Kriging surrogate model for updating of the finite element model of cable-stayed bridge is proposed. First, a simple cable-stayed bridge is used to verify the method and the updating results of Kriging model are compared with those using the response surface model. Results show that Kriging model has higher accuracy than the response surface model. Then the method is utilized to update the model of a long-span cable-stayed bridge in Hong Kong. The natural frequencies are extracted using various methods from the ambient data collected by the Wind and Structural Health Monitoring System installed on the bridge. The maximum deflection records at two specific locations in the load test form the updating objective function. Finally, the fatigue lives of the structure at two cross sections are calculated with the finite element models before and after updating considering the mean stress effect. Results are compared with those calculated from the strain gauge data for verification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.858-861
• /
• 2014

This paper presents a simplified finite element tire model for vehicle dynamics analysis. The classical finite element tire model was too big to simulate dynamic properties of the tire. In the simplified model, number of nodes of the tire model was dramatically reduced, and thus its simulation time was several times less than the classical model. Bead, carcass, belt which have an important role to the dynamic characteristics of tire were replaced by simple axis symmetric membrane elements. Also the rebar element was deleted. The tire model has been verified by comparing vertical stiffness data of the simulation model to the test data.