• Wind and Structures
• /
• 제26권1호
• /
• pp.25-34
• /
• 2018

This paper presents a beam finite element model of a vibrate wind blade in large elastic deformation subjected to the aerodynamic, centrifugal, gyroscopic and gravity loads. The gyroscopic loads applied to the blade are induced by her simultaneous vibration and rotation. The proposed beam finite element model is based on a simplex interpolation method and it is mainly intended to the numerical analysis of wind blades vibration in large elastic deformation. For this purpose, the theory of the sheared beams and the finite element method are combined to develop the algebraic equations system governing the three-dimensional motion of blade vibration. The applicability of the theoretical approach is elucidated through an original case study. Also, the static deformation of the used wind blade is assessed by appropriate software using a solid finite element model in order to show the effectiveness of the obtained results. To simulate the nonlinear dynamic response of wind blade, the predictor-corrector Newmark scheme is applied and the stability of numerical process is approved during a large time of blade functioning. Finally, the influence of the modified geometrical stiffness on the amplitudes and frequencies of the wind blade vibration induced by the sinusoidal excitation of gravity is analyzed.

• Ocean Systems Engineering
• /
• 제5권2호
• /
• pp.77-89
• /
• 2015

As the exploitation of oil and gas resources advances into deeper waters and harsher environments, the design and analysis of the flexible risers has become the research focus in the offshore engineering filed. Due to the complexity of the components and the sliding between the adjacent layers, the bending response of the flexible risers is highly non-linear. This paper presents the finite element analysis of the flexible risers under bending loads. The detailed finite element model of the flexible riser is established in ABAQUS software. This finite element model incorporates all the fine details of the riser to accurately predict its nonlinear structural behavior. Based on the finite element model, the bending moment-curvature relationships of a flexible riser under various axisymmetric loads have been investigated. The results have been compared with the analytical ones obtained from the literature and good agreements have been found. Moreover, the stress of the tendon armors has been studied. The non-linear relationship between the armor tendons' stress and the bending loads has been obtained.

• Steel and Composite Structures
• /
• 제10권6호
• /
• pp.541-561
• /
• 2010

This paper presents finite element analyses, experimental measurements and finite element model updating of an arch type steel laboratory bridge model using semi-rigid connections. The laboratory bridge model is a single span and fixed base structure with a length of 6.1 m and width of 1.1m. The height of the bridge column is 0.85 m and the maximum arch height is 0.95 m. Firstly, a finite element model of the bridge is created in SAP2000 program and analytical dynamic characteristics such as natural frequencies and mode shapes are determined. Then, experimental measurements using ambient vibration tests are performed and dynamic characteristics (natural frequencies, mode shapes and damping ratios) are obtained. Ambient vibration tests are performed under natural excitations such as wind and small impact effects. The Enhanced Frequency Domain Decomposition method in the frequency domain and the Stochastic Subspace Identification method in the time domain are used to extract the dynamic characteristics. Then the finite element model of the bridge is updated using linear elastic rotational springs in the supports and structural element connections to minimize the differences between analytically and experimentally estimated dynamic characteristics. At the end of the study, maximum differences in the natural frequencies are reduced on average from 47% to 2.6%. It is seen that there is a good agreement between analytical and experimental results after finite element model updating. Also, connection percentages of the all structural elements to joints are determined depending on the rotational spring stiffness.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.44-52
• /
• 1992

A post-processor is developed to be effectively usable in the personal computer. 3-dimensional controur lines are shown on the surface of the finite element model and also on the 3-dimensional cutting plane, using the function linearly interpolated onto the triangular elements which are constructed on the surface or sectional polygons. And these polygons are originated from the finite element model, 3-dimensional model is projected on the plane with hidden line removal by comparision technique[6]. The graphic data file is used to increase the protability of the program. It is easy to use in the other computer system if the graphic routine adopted that computer system is developed. The developed program has wide applications in 3-dimensional finite element analysis.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.380-387
• /
• 2009

The reliability concerns of solder interconnections in flip chip PBGA packages are produced mainly by the mismatch of coefficient of thermal expansion(CTE) between the module and PCB. Finite element analysis has been employed extensively to simulate thermal loading for solder joint reliability and deformation of packages in electronic packages. The objective of this paper is to study the thermo-mechanical behavior of FC-PBGA package assemblies subjected to temperature change, with an emphasis on the effect of the finite element model, material models and temperature conditions. Numerical results are compared with the experimental results by using $moir{\acute{e}}$ interferometry. Result shows that the bending displacements of the chip calculated by the finite element analysis with viscoplastic material model is in good agreement with those by $moir{\acute{e}}$ inteferometry.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.228-234
• /
• 2013

This study focuses on development of a finite element model for analysis of thermal characteristics of a direct-connection spindle of a machining center by joint simulation of heat transfer and thermal deformation. Two finite element analyses were carried out procedurally for heat transfer, first, to identify temperature distribution of components of the spindle and then for thermal deformation to identify their structural behavior based on the temperature distribution. It was assumed that the heat transfer between a component revolving and the surrounding air is identical to that between a flat plate and the running air on it and the heat transfer is based on a uniform surface heat flux for turbulent flow. The results from the analyses were compared with those from experiments to validate the finite element model.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.190-196
• /
• 2004

Thick composite laminated plates is considered in 3D finite-element. To consider continuity of transverse stresses and displacement field, mixed finite-element has been developed by using layerwise theory and the minimum potential energy principle. Mixed finite-element has been enforced through the thick direction, Z, of a laminated plate by considering six degree-of-freedoms per node. Six degree-of-freedoms are three displacement components in the coordinate axes directions and three transverse stress components ${\sigma}_z,\;{\tau}_{xz},\;{\tau}_{yz}$. The model maintain the fundamental elasticity relations that are stress-strain relation and displacement-strain relation, because the transverse stress components invoked as nodal degrees of freedom by using the fundamental elasticity relationship between th components of stress and displacement. Random vibration analysis of the model is performed by computing consistent mass matrix and computing covariance in frequency domain technique.

• 소음진동
• /
• 제9권1호
• /
• pp.49-59
• /
• 1999

The mechanism of Stewart platform has many advantages for kinematic analysis and control. Thus there have been many research about employing this mechanism in the new type of machine tool. Since the vibration caused during the manufacturing process has a severely adverse effect on the machining precision. it is very important to enhance the vibrational characteristics. However. it is not easy to use finite element model for the vibration analysis. That is because the vibration behaviors of the structure vary in a complicated manner according as the length of links varies. In this paper, a Stewart platform type of machine tool is modeled in finite element method and then updated by using the experimental modal data. Finally. the static and dynamic characteristics of the finite element model are predicted and then discussed.

• 소음진동
• /
• 제9권3호
• /
• pp.493-501
• /
• 1999

The vibration modes of resilient mounting system and foundation structure which support diesel engine/generator set and acoustic enclosure walls play an important role in the vibration transmission process. So, it is necessary to perform vibration mode analysis of resilient mounting system and foundation structure. For some reasons, if the vibration modal analysis of resilient mounting system and foundation structure of acoustic enclosure could be simultaneously done by finite element method, it would be very efficient approach. In this paper, vibration modal analysis method using finite element method for multi stage mounting system having n d.o.f model was proposed. Vibration analysis of single and double stage resilient mounting system was performed to verify the validity of the proposed method. Also frequency response results were compared in case of rigid foundation model and finite element foundation model which was compared with experimental modal analysis results.

• 한국공간구조학회논문집
• /
• 제21권2호
• /
• pp.81-88
• /
• 2021

In this paper, nonlinear finite element analysis was conducted based on the experimental results on buckling restrained brace. The reliability of the analytical model was verified by comparing the results of experimental studies with hysteresis loop, bi-linear curve, cumulative energy dissipation capacity, and equivalent viscous damping. A valid finite element model has been secured and will be used as basic data for finite element analysis of buckling restrained braces in the future.