• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.39-45
• /
• 2006

The aim of this work is to develop sense-differentiated textiles using Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The ITY(Interlace Textured Yarn) using T-T yarn with various over feed ratios of PET filament was manufactured with different shrinking percentage of core yarn and then the fabrics were woven on the same weaving 100m using ITY produced. The mechanical properties and the handles of the fabrics were examined with KES-FB system suggested by Kawabata. The shrinkage of ITY was increased with decreasing over feed ratio and increased with increasing heat treatment temperature of T-T yarn. The initial elasticity modulus of ITY was decreased with increasing over feed ratio and heat treatment temperature of T-T yarn. The tensile energy of fabrics was decreased with increasing of over feed ratio, but bending rigidity and shear rigidity of fabrics were increased with increasing of over feed ratio of PET filament. The results indicate that the fabric using T-T yarn with finer than I denier mono filament can be used for the purpose of sense-differentiated textile.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.43-50
• /
• 2011

Electrically conductive yarn coated with silver particles are widely used to make smart wear but recent studies on smart fabrics are focused on measuring method of electrical characteristics and improving technologies of its electric properties. Also durability of conductive yarn with environmental change was also important work to make smart fabric. We compared resistance changes of silver coated conductive yarns under various physical and chemical conditions such as repeated strain, heat exposure and pH for basic informations on smart wear manufacturing process. And we deduct that repeated strain among the physical conditions was most effective factors on yarn resistance change and the low resistance change was observed with increasing the number of filaments in identical yarn fineness.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.29-38
• /
• 2009

Natural dyes seem to be more profitable on human and environment, and recently they could be considered as a better alternative to synthesized dyes. The aim of the current work was to investigate the dyeing property and antimicrobial activity of commercial cotton fabrics dyed with kumazasa (usually called in japan) which is known as conventional japan bamboo leaves. Actually, the dyeability and antimicrobial property of dyed fabric with natural mordant/dyeing was compared with synthetic mordant/dye process. The results of this study obtained are as follows. The apparently colour of kumazasa leaves extract dyed fabrics showed with light green or slightly yellow-green. In colorfastness to washing, ${\Delta}E$ and K/S values of dyed fabrics with natural chitosan as mordant used was shown to be more excellent results, than was synthetic mordant used. However, the decrease rate was recorded nearly 50% when washing repeated 20 cycles. In result of antimicrobial effect for bacteria, the dyed fabrics didn't show the significant antimicrobial activity to the both dyed with and without mordant. Results of this investigation considered that low-cost, natural, bio-mordant are relatively effective in natural coloration.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.1-10
• /
• 2009

This paper surveys the physical properties of sheath/core nylon/PET high hollow composites filaments and its fabrics according to the various elution conditions such as concentration of elution, eluted time and eluted temperature. For this purpose, sheath/core nylon/PET filament was texturized and four kinds of fabric specimens were woven with different warp and weft densities. These grey fabrics were eluted with two kinds of concentrations of NaOH (30g/l, 40g/l), three kinds of eluted temperatures $50^{\circ}C,\;60^{\circ}C,\;85^{\circ}C$) and two kinds of eluted times (60min, l20min). The elution characteristics of these specimens were investigated and discussed with different elution conditions. In addition, the mechanical properties such as extensibility, bending rigidity, shear modulus and compressional work of these specimens aceording to the elution conditions were analysed and summarized with cross-sectional shapes of eluted filaments measured by SEM.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.66-67
• /
• 2016

Modular construction is attracting attention as the solution of recent problems in construction site. Such as lack of construction workforce, increasing labor costs, work delay due to extreme weather events and strengthening government regulations. However, despite the many advantages, Modular construction has not been activated dueto high construction costs compared to other construction methods. Accordingly, the object of this study is priority derivation of prefabricated house cost reduction factors and use as basic research data. For research performance, we have analyzed the blueprint and bill of quantities of a modular construction based public dormitory which was built in 2013. In result, the proportion of modular construction and on-site construction is 66% and 34%, and the construction cost proportion by activity was devided in to construction(79%), machinery(7%), electricity(5%) and civil(9%). Among these results in order to reduce costs, interior finishing(19.4) steel-frame(16.9%), metal works(13.5%), RC(11.8%), joinery(7.3%) is the order requires focused management.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.93-101
• /
• 2009

Recently, public interest in housing defects, such as construction errors, occupiers' complaints, faults in production, and so on, is increasing. In addition, the construction requirements of high-rise residential buildings have increased, due to the higher prices of urban areas, especially in metropolitan areas. While previous research has focused on the defects occurring in apartment housing complexes, research has not been carried out on the defects occurring in high-rise residential buildings. In this paper, the defects patterns and characteristics of high-rise residential buildings are examined and analyzed and a defect management plan is then suggested. In order to do this, we collected the defects data of high-rise residential buildings recorded by 2,299 of 2,327 occupants. The defect occurrence rate (DOR) in the residential area is 98.8%. The frequency rate of defect occurrence over the total defect occurrence since building completion is 63.28% during the first year, 24.63% (second year), 6.88% (third year), 2.27% (fourth year), and 2.53% (fifth year). The result of correlation analysis between work types showed that there is a relationship between the built-in furniture and electronics (F&E) and painting works, and the F&E and masonry works, such as marble finishing. We expect that this research will assist in the efforts to decrease the number of defects in high-rise buildings.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.42-47
• /
• 2004

The main objective of this work is to develop melt-blown nonwoven fabric composite materials have electromagnetic shielding characteristics using thin copper film. Melt-blown nonwoven fabric is the matrix phase and thin copper films are the reinforcement of the composite materials. Thin copper films are incorporated as conductive fillers to provide the electromagnetic shielding property of the melt-blown nonwoven fabric. The width and interval of thin copper films in the nonwoven fabric are varied by changing 1, 3, 5 mm for thin copper film's width and 1, 3, 5 mm for thin copper film's interval. The shielding effectiveness(SE) of various melt-blown nonwoven fabrics is measured in the frequency range of 50 MHz to 1.8 GHz. The variations of SE of melt-blown nonwoven fabric with width and interval of thin copper films are described. Suitability of melt-blown nonwoven fabric for electromagnetic shielding applications is discussed. The results indicate that the melt-blown nonwoven fabric composite material using thin copper film can be used for the purpose of electromagnetic shielding.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.253-259
• /
• 2012

In this work, the natural indigo production process from Polygonum tinctorium was balanced based on the traditional Niram method in Korea. A standard procedure was determined considering the conditions of indican extraction from plant material, the amount of alkali for precipitation, storage of extract, etc. The effect of experimental conditions on the yield of crude dye was investigated. The contents of indigo and indirubin of the crude dyes were analyzed by HPLC. Increase of the amount of crude dye was observed within 1-2.5 days of extraction time. Longer extraction beyond 2.5 days resulted in a slight decrease in the amount of crude dye. There was no consistency in terms of indigo content depending on extraction pH. We found that the storage of extract or harvested plants affected adversely to dye yield and dye quality. Based on the lab scale extraction, large scale extraction was performed for 2-2.5 days in water and 2.0-2.5 g/L of $Ca(OH)_2$ was applied for precipitation of indigo dye. We obtained natural indigo dye containing about 15% of pure indigo in scale-up production using whole plant except root.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.129-134
• /
• 2009

학교 조명실태를 조사하고 교실 1실에 설치된 조명기구의 수량별로 분류하고, 분류된 형태별로 조도를 측정하여 조도실태를 분석하였다. 책상면 조도는 학교시설기준을 만족하나 칠판용 국부조명을 설치하지 않은 경우 칠판조도가 학교시설기준에 미치지 못하였다. 교실 마감재 반사율 측정과 램프교체 및 램프청소 실험 등 실제로 측정한 자료를 기초로 하여 시뮬레이션 한 결과 현실적으로 전반조명 9등과 칠판용 국부조명이 필요하였으며, 유지관리를 고려한 설계가 요구됨을 알 수 있었다.