• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.116-117
• /
• 2019

In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.81-82
• /
• 2019

In this study, the Proctor penetration resistance test value and the hardness value of the improved Durometer were compared and analyzed for the change in the FA replacement rate of the concrete using CGS fine aggregate. The results are summarized as follows. It is. 1) The Proctor penetration resistance test value and the hardness value of the improved Durometer showed a high correlation in the form of a curve. 2) About surface finish Super-resolution with the improved Durometer is considered to be useful when using about 50 HD and about 80 HD in the end to determine the surface finishing work time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.29-30
• /
• 2019

The indoor air quality of modern people who work indoors more than 80 percent a day has also become a very important factor in their lives. But most indoor air quality is highly polluted due to energy conservation and lack of ventilation. This can lead to pneumonia, asthma and even lung cancer, which can be fatal to children, the elderly and the elderly. Indoor pollutants are caused by boards, wallpaper, paint, etc. used in interior By producing indoor finishing materials using active alumina gel, which is used as dehumidifier, indoor pollutants will be reduced and the possibility of developing respiratory diseases and lung cancer will be reduced.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.123-124
• /
• 2022

The work of modeling and calculating the quantity of detailed parts requires a lot of time and effort. However, The information of BIM Model can be used to predict the amount of uncreated parts with Deep Learning. In this study, Deep Learning was used to predict the total length of the member of frame that was not created. As a result, it was confirmed that the error rate was inside or outside 3%. And predicting other components in this way will increase productivity in Architectural field.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.67-68
• /
• 2022

The area inside the apartment building where tiles are installed is applied as a finishing material for walls and floors, including exterior walls, balconies, hallways, bathrooms, and kitchens. As it is constructed in various spaces, differences in the type and period of occurrence of tile defects may appear, which is caused by heterogeneous characteristics between materials and external causes. Therefore, in this study, two-way ANOVA was used to figure out the relationship between the defect occurrence type and the period depending on the type of tile construction in the apartment building.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.82-88
• /
• 2013

In this project a preliminary experimental research work was done to apply mortars containing magnetite as fine aggregates unto floor finishing materials in order to make indoor environment eco-friendly and to have noiseproof control between floors. Crushed magnetites were substituted as sands in the mix design with a range of 0, 20, 40, 60, 100%. First far-infrared radiation tests to determine emissivity and emission power were done in accordance with the KICM test standard and an outstanding result was obtained. Density and compressive strength test results also showed that as the substitution increases, test values increase in a linear trend. However dry shrinkage test results revealed that as the substitution increases, shrinkage strain also increases. To clearly seek a solution about this problem, more experimental works should be done on oncoming experimental program.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1333-1343
• /
• 1999

경성 실시간 시스템의 태스크들은 논리적으로 올바른 결과를 산출해야 하지만 또한 각자의 시간 제한 조건을 만족하여야 한다. 간격제한 스케줄링은 시간 제한 조건이 시간 간격 제한으로 주어지는 실시간 태스크들을 스케줄하기 위하여 도입되었다. 간격제한 스케줄링에서의 각 태스크들은 시간 간격 제한 조건을 갖는데, 이것은 태스크의 두 연속적인 수행의 종료시간에 대해 제한을 가한다. 다시 말해, 간격제한 스케줄링에서의 각 태스크 수행은 그 태스크의 직전 수행 완료 시간으로부터 발생하는 데드라인을 갖는다. 간격제한 태스크 스케줄링에 관한 많은 연구는 단순화 방법에 기초하고 있다. 그러나, 우리는 이 논문에서 단순화 방법을 사용하지 않고, 정적 우선순위 및 정적 분리 제한 정책을 채용한 새로운 간격제한 태스크 스케줄링 방법을 제안한다. 제안된 정적 할당 방법은 스케줄링 분석 및 구현을 매우 간단히 할 수 있으며, 또한 스케줄러의 실행시간 오버헤드를 줄일 수 있다.Abstract Tasks in hard real-time systems must not only be logically correct but also meet their timing constraints. The distance-constrained scheduling has been introduced to schedule real-time tasks whose timing constraints are characterized by temporal distance constraints. Each task in the distance-constrained scheduling has a temporal distance constraint which imposes restriction on the finishing times of two consecutive executions of the task. Thus, each execution of a task in the distance-constrained scheduling has a deadline relative to the finishing time of the previous execution of the task.Much work on the distance-constrained task scheduling has been based on the reduction technique. In this paper, we propose a new scheme for the distance-constrained task scheduling which does not use the reduction technique but adopts static priority and static separation constraint assignment policy. We show that our static assignment approach can simplify the scheduling analysis and its implementation, and can also reduce the run-time overhead of the scheduler.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.249-258
• /
• 2002

Natural silk is formed by two proteins : the crystalline fibroin (inside the silk thread) and amorphous sericin (as a tube outside the thread). The degumming process is used to eliminate the external sericin prior to dyeing ; generally it makes use of soaps at about pH 10. Sericin is the protein constituent that "gums"together the fibroin filaments of cocoon silk. It constitutes about 25% of the weight of the cocoon, is soluble in hot water and "gels" on cooling. The removal of sericin from raw silk, known as degumming, is a simple but important process usually employing hot dilute soap or alkaline solution and occasionally dilute acids or enzymic methods. During degumming, alkali is taken up by the sericin and the free acid from the soap is formed ; this may be deposited on the fiber, reducing the rate of degumming and protecting it from hydrolysis. Alkali is often added to maintain or restore the pH of the baths, but it is rarely used alone, since it leaves the silk rather harsh in handle. If complete sericin removal is required as for printing, sodium carbonate may be added. If the pH of the bath exceeds 11, the fibroin is attacked. Recently, According to the development of electrolysis, we can be obtained the electrolytic reduction water(above pH 11.5) and electrolytic oxidation water (below pH 3). The aim of this work was to study a degumming process using electrolytic water and a possibility of sericin recovery. The new degumming process used electrolytic water operates at $95^\circ{C}$ for 2hr. without any reagents. The wastewater of this process are formed by a solution of sericin in water. This conditions suggest the study of a possible recovery of this protein (sericin) which has an amino acid composition suitable for many used in cosmetics, textile finishing agents, animal feeding, etc. The degumming process using electrolytic water is available to reduce treatment costs and pollute and at the same time to recover sericin.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.154-162
• /
• 2015

As there is no case study with current status, measurements or description on the state of actual site of rural area only, the delivery of actual conditions about such an area is significantly limited. The purpose of this study is to pinpoint issues with housing conditions of low-income family with disabled members in the rural area. For such a purpose, 25 households of disabled people have been visited for interview, on-site research and survey, of which results are summed up in this paper as following: First, average monthly income of such family turned out to be KRW 480,000, most of which is from the government subsidy. High ratio of such families has resided in a house with average size of approximately 56m2 for about 24 years. Secondly the most needed maintenance work with top priority was for the toilet, and many of the interviewees expressed their discomfort about small size of their bathrooms and inconvenient facilities therein. Thirdly, most of such houses had too high thresholds that posed danger and inconvenience. Such thresholds had average height of 13cm, which can be considered as completely inconsiderate of disabled users. Fourth issue was that these people needed safety handle that will enable them to stand up or to be in the standing posture in the living room and bedroom where they spend most of their time. Fifthly, they wanted finishing materials with waterproof functionality as well as replacement of finishing materials and wallpaper which were too old and caused hygiene issues. As these issues represent, current housing for disabled people in the rural area turned out to be poor and risky space rather than the place where difficulty of individual situation can be resolved or their disability can be complemented. Thus it can be determined that now is the time to arrange the solutions for such housing difficulties and to establish customized housing plan to ensure safety and convenience.

• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.276-283
• /
• 2007

The purpose of this study were to investigate characteristic changes on nonwoven fabric for disposable work clothes by the yellow soil printing. It separate grind yellow soil as two different size of particles $45\sim52{\mu}m$ and $53\sim65{\mu}m$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of yellow soil printing on nonwoven fabric were to observe, dyeability by using spectrophotometer, moisture regain by oven method, air permeability, anion property and antibacterial activity. The results were as follows: When yellow soil concentration increased from 5 to 10%, K/S value also increased from 1.05 to 1.88. When yellow soil concentration increased, moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. Air permeability decreased when the charcoal printing concentration increased. Anion occurrence appeared $140\sim160ion/cc$ from three different kinds of nonwoven fabrics in 3% and 9% yellow soil concentration. Therefore, occurred anion ineffectively. In concentration of 3%, rate of deodorization measured as 89%, 83% and 87%, and 9% concentration caused 96%, 86% and 93% of high deodorization. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of 60%, however, 3% and 9% concentration finished nonwoven fabric resulted 99.9% of excellent antibacterial activity Surface temperature increased $1.5\sim2^{\circ}C$ by yellow soil finishing.