• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.23-27
• /
• 2008

In this work, poly(diallyldimethylammoniumchloride) (PDDAC) and meso-tetrakis(4-carboxyphenyl)porphyrin were considered to produce the self-assembly fabrication films. This method is based on the layer-by-layer (LbL) deposition produced by the electrostatic attraction between positively charged PDDAC and negatively charged porphyrin ions. The result of multilayer fabrication was discussed with the level of color strength (K/S). K/S spectra of the fabricated multilayer films showed gradual increase behaviors. In addition, the color photo images of the fabricated multilayer films showed that PDDAC and porphyrin were successfully attracted by electrostatic self-assembly forces.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.208-209
• /
• 2021

In 2017, 100 aftershocks with a magnitude of 2.0~3.0 and 615 minor earthquakes in Pohang in Korea caused the collapse and destruction of aggregate, tile, glass, and other structural components of multi-family houses constructed as finishing materials for buildings, causing damage to vehicles and casualties. Based on this factor, seismic design standards were established for non-structural elements of buildings that were applied only to past structures. Therefore, this study reinterpreted various vibration response spectra transmitted to waterproof layers as well as the definition and concept of the waterproof layer demand response spectrum derived by developing various vibration response test evaluation devices through a new testing apparatus.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.354-361
• /
• 2005

In high speed cutting process, due to the friction between the tool and workpiece, a temperature rise of contacting part is serious. It need to develop cutting tool for overcoming such a poor condition. So now, some studies, the optimization of tool shapes, the fine grains of tool material, multi-layer coating of tools are processing. If mirror finishing on the tool is processed, there is advantage of relation between chip and tool, because of less friction, and also tool's lift would be increased. As a result mirror like finishing is expected efficient enhancement of tool. Generally, it is too difficult to process by a general way for tools of complex shapes, it is required a new method to process such complex shape tools. The magnetic fluid polishing technique can polish the workpiece of complex shape, because the polishing method which polishes as compress the workpiece by the magnetism abrasives to arrange to the linear according to the line of magnetic force. In this paper, We polished the surface of the high speed cutting tool using the magnetic fluid polishing technique, to enhance the performance of the high speed cutting tool.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.222-229
• /
• 2021

Icing causes various serious problems, where water vapor or water droplets adhere at cold conditions. Therefore, understanding of ice adhesion on solid surface and technology to reduce de-icing force are essential for surface finishing of metallic materials used in extreme environments and aircrafts. In this study, we controlled wettability of aluminum alloy using anodic oxidation, hydrophobic coating and lubricant-impregnation. In addition, surface porosity of anodized oxide layer was controlled to realize superhydrophilicity and superhydrophobicity. Then, de-icing force on these surfaces with a wide range of wettability and mobility of water was measured. The results show that the enhanced wettability of hydrophilic surface causes strong adhesion of ice. The hydrophobic coating on the nanoporous anodic oxide layer reduces the adhesion of ice, but the volume expansion of water during the freezing diminishes the effect. The lubricant-impregnated surface shows an extremely low adhesion of ice, since the lubricant inhibits the direct contact between ice and solid surface.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1805-1811
• /
• 2016

The goal of this study was to estimate the emissions of greenhouse gases (GHG), namely methane ($CH_4$), nitrous oxide ($N_2O$), and carbon dioxide ($CO_2$) from poultry and pig production in South Korea over the last 10 years (2005 through 2014). The calculations of GHG emissions were based on Intergovernmental Panel on Climate Change (IPCC) guidelines. Over the study period, the $CH_4$ emission from manure management decreased in layer chickens, nursery to finishing pigs and gestating to lactating sows, but there was a gradual increase in $CH_4$ emission from broiler chickens and male breeding pigs. Both sows and nursery to finishing pigs were associated with greater emissions from enteric fermentation than the boars, especially in 2009. Layer chickens produced lower direct and indirect $N_2O$ emissions from 2009 to 2014, whereas the average direct and indirect $N_2O$ emissions from manure management for broiler chickens were 12.48 and $4.93Gg\;CO_2-eq/yr$, respectively. Annual direct and indirect $N_2O$ emissions for broiler chickens tended to decrease in 2014. Average $CO_2$ emission from direct on-farm energy uses for broiler and layer chickens were 46.62 and $136.56Gg\;CO_2-eq/yr$, respectively. For pig sectors, the $N_2O$ emission from direct and indirect sources gradually increased, but they decreased for breeding pigs. Carbon dioxide emission from direct on-farm energy uses reached a maximum of $53.93Gg\;CO_2-eq/yr$ in 2009, but this total gradually declined in 2010 and 2011. For boars, the greatest $CO_2$ emission occurred in 2012 and was $9.44Gg\;CO_2-eq/yr$. Indirect $N_2O$ emission was the largest component of GHG emissions in broilers. In layer chickens, the largest contributing factor to GHG emissions was $CO_2$ from direct on-farm energy uses. For pig production, the largest component of GHG emissions was $CH_4$ from manure management, followed by $CO_2$ emission from direct on-farm energy use and $CH_4$ enteric fermentation emission, which accounted for 8.47, 2.85, and $2.82Gg-CO_2/yr$, respectively. The greatest GHG emission intensity occurred in female breeding sows relative to boars. Overall, it is an important issue for the poultry and pig industry of South Korea to reduce GHG emissions with the effective approaches for the sustainability of agricultural practices.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권7호
• /
• pp.1019-1025
• /
• 2006

Two experiments were conducted separately to study the effect of astaxanthin on production performance and egg quality in laying hens and meat quality in finishing pigs. In Experiment 1, four hundred Brown Hy-Line layers, 26 weeks of age, were randomly divided into five treatments according to a single factorial arrangement. Each treatment had four replicates comprising 20 birds each. The dietary treatments were: 0, 0.7, 0.9, 1.1 and 1.3 ppm of astaxanthin fed for 14 days. Then all the birds were fed an astaxanthin-free diet (0 ppm astaxanthin) for an additional 7 days. The results showed that dietary astaxanthin had no significant effect on layer production performance. There was no significant effect (p>0.05) on egg weight, yolk height and Haugh unit (HU) with increasing dietary astaxanthin level and increased storage time. Yolk color was linearly increased (p<0.01) with the increasing dietary astaxanthin level and significantly decreased with the increasing storage time (p<0.05). The TBARS value in yolk decreased linearly (p<0.05) with increasing amount of dietary astaxanthin and storage time. When the diets were replaced with the astaxanthin-free feeds, all parameters concerning egg quality decreased with increasing days of measurement, especially the yolk color, and HU significantly decreased (p<0.05). In experiment 2, thirty-six barrows ($L{\times}Y{\times}D$), $107{\pm}3.1kg$ BW, were randomly divided into three treatments according to a single factorial arrangement. Each treatment had three replicates comprising 4 pigs each. The dietary treatments were: 0, 1.5 and 3.0 ppm of astaxanthin fed for 14 days. The results showed that dietary astaxanthin had no significant effects on production performance. There was a linear effect (p<0.05) on dressing percentage, backf.at thickness and loin muscle area with increasing dietary astaxanthin level. There were no significant effects (p>0.05) on the TBARS value, drip loss, meat color, marbling and $L^*$, $a^*$, $b^*$ values. Cholesterol concentration in meat was not affected by dietary addition of astaxanthin. It could be concluded that astaxanthin supplementation was beneficial to improve egg yolk color; egg quality during storage and it also could improve the meat quality of finishing pigs.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.39-47
• /
• 2022

국내의 공동주택 보급률 증가에 따라 층간소음으로 인한 문제가 증가하고 있다. 이를 예방하기 위하여 바닥 충격음 차단 구조에 대한 수요가 높아지고 있으며 해당 구조에 대한 성능 인증이 이뤄지고 있지만 소음 차단 성능이 현장에서는 재현되지 않는다는 문제점이 있다. 해당 구조가 제 성능을 발휘하기 위해서는 일정 두께 이상의 마감 모르타르 타설이 필요하며, 해당 구조의 시공 적정성 판정을 위하여 GPR을 이용한 두께 측정 실험을 진행하였다. 본 연구에서 개발한 두께 측정 알고리즘은 측정된 데이터를 기반으로 상대유전율을 설정할 수 있어 정확한 두께 값을 측정할 수 있다. 네 종류의 바닥 충격음 차단 인증 구조에서 GPR 두께 측정 실험을 진행하였으며, GPR 데이터와 천공 측정 데이터 간 평균 오차는 1.95mm로 나타났다. 또한 마감재 유무가 측정값에 미치는 영향을 조사하기 위하여 총 3가지 종류의 마감재를 배치하고 실험을 진행으며, 평균 오차는 1.70mm로 나타났다. 추가적으로 장비의 샘플링 오차, 개발 알고리즘 변수, 천공 오차등을 종합적으로 고려하였을 때, GPR 계측 및 제안 알고리즘은 매우 높은 정확도로 슬래브 마감 모르타르의 두께 측정에 적용할 수 있음을 확인하였다.

• 보존과학회지
• /
• 제26권4호
• /
• pp.445-458
• /
• 2010

1993년에 해체 및 보존 처리된 금산사미륵전 벽화는 현재 박락과 균열, 박리와 같은 심각한 손상이 진행된 것으로 조사되었다. 금번 분석조사는 향후 진행될 금산사 미륵전 벽화 보존처리를 위하여 과거에 처리된 벽체의 재료적 특성을 파악하기위해 진행되었다. 손상이 가장 심한 남측 벽의 벽체를 대상으로 하였으며 시료는 남측 2층 외벽의 불벽과 포벽화의 마감벽, 중벽, 배면 보강부의에서 박락된 벽체시료를 채취하여 미세구조와 화학성분, 결정상, 그리고 입도분포를 중심으로 분석하였다. 분석결과, 불벽과 포벽의 마감벽은 유사한 풍화토를 사용하였고 중벽 또한 유사한 모래와 풍화토를 사용하였으며 비교적 균일한 크기와 모양의 광물 입자들의 집합체로 구성되어 있으나, 과거 보존처리 과정에서 벽체의 보강을 위해 사용한 아크릴 계열의 경화제의 영향으로 광물 입자들이 응집되어 매우 단단한 응결체 (aggregate)를 형성하고 있는 것으로 확인되었다. 벽체의 배면 1차 보강층과 배면 2차 보강층은 석고($CaSO_4{\cdot}2H_2O$)가 주 결정상인 것으로 분석되었으며, 모래와 점토광물이 소량 함유되어 있는 것으로 판단된다. 향후 보존처리는 부분적으로 경화된 벽체후면에 대한 조치와 1, 2차보강층의 제거가 우선적으로 진행되어야 한다.

• 보존과학회지
• /
• 제32권1호
• /
• pp.75-88
• /
• 2016

조선시대 5개 전각의 사찰벽화를 대상으로 벽체를 구성하는 토양성분에 대한 분석조사를 실시하였다. 입도분석 결과 층위에 따라 구성입자의 함량이 다르게 나타났으며, 마감층이 중벽층에 비해 중립사 이상크기 입자 분포가 다소 높은 경향을 보였다. 토양 구성광물 분석에서는 모래의 주성분인 석영(Q)의 결정상, 장석(F)의 결정상 그리고 점토 광물(C) 등 일반적인 토양과 유사한 광물 조성을 나타내어 벽체는 암석의 풍화산물로 생성된 풍화토를 사용한 것으로 보인다. 화학성분 분석 결과, 실리콘(Si), 알루미늄(Al), 철(Fe) 그리고 포타슘(K)등이 검출되었고, 토양 미세조직에서는 모래 및 점토크기의 토양입자들이 관찰되어 벽체를 구성하는 토양은 암석이 풍화되어 생성된 풍화토와 모래인 것으로 나타났다. 분석결과 벽체는 주로 황토가 사용되었고, 점토와 모래를 혼합하여 층위별 기능에 따라 제작한 것으로 확인되었다. 이번 연구를 통해 조선시대 사찰벽화의 벽체를 구성하는 재질의 특성을 파악하고, 제작기술에 관한 경향성을 제시할 수 있었다.