• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.425-428
• /
• 1994

Non-uniform minute deformation of a cylinderical workpiece resulted from the heat treatment process prior to the grinding makes it diffeclt to control the approaching feedrate of a grinding wheelto a workpiece optimallywithout on-site detection of the grinding states in the plunge grinding. The 4-stage model of the plunge grinding process is proposed according to the state of contact between grinding wheel and workpiece ; precontact, partial contact, entire contact and spark-out. Despite of being scrious to the precision of workpiece finished, the duration of spark-out is determined empirically. The purpose of this research is to develop a monitoring/control system for saving non- production time and setting the optimal spark-out time based on sensor information in the plunge grinding using AE and ultra sonic sensor.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.39-45
• /
• 2000

In recent years, composite materials such as fiber reinforced plastics (FRP) have gained considerable attention in the aircraft and automobile industries due to their light weight, high modulus and specific strength. In practice, control of chip formation appears to be the most serious problem since chip formation mechanism in composite machining has significant effects on the finished surface ［1,2,3,4,5］. Current study will discuss frequency analysis based on autoregressive (AR) time series model and process characterization in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the different chip formation mechanisms and model coefficients are established.(omitted)

• IE interfaces
• /
• v.13 no.3
• /
• pp.339-347
• /
• 2000

The use of the Web-based Simulation Environment (WBSE) provides a strong influence on supply chain simulations. A virtual supply chain simulation is available to evaluate strategies for reducing response time to customers and for shrinking the finished goods inventory along its supply chain. This paper presents the basic concepts and definitions of Web-Based Global Supply Chain Management (WBGSCM) simulation system. It also discusses the advantages of supply chain simulation modules integration. A Time Synchronization Mechanism (TSM) called Phased Bucket Scheme (PBS) is introduced as an approach of the distributed simulation modules integration.

• Transactions of Materials Processing
• /
• v.3 no.4
• /
• pp.415-426
• /
• 1994

Multistage deformation behavior of Nb-microalloyed steel and carbon steel was studied by torsion test with declining temperature T, constant pass strain $\varepsilon_i$, interrupt time $(t_i)$, and varying strain rate $(\.{\varepsilon})$. In the range of $1000^{\circ}C~790^{\circ}C$ and 4.00/sec~0.38/sec, the flow stress at each pass was correlated to the deformation variables. As the finished deformation temperatures are decreased to the range of $790^{\circ}C~900^{\circ}C$, Nb precipitates play an important role on the grain refinement of Nb-microalloyed steel. the flow stress of Nb-microalloyed steel was higher than the carbon steel's while the grain size of Nb-microalloyed steel was smaller than carbon steel below the temperature of $900^{\circ}C$.

• The Research Journal of the Costume Culture
• /
• v.11 no.2
• /
• pp.208-218
• /
• 2003

The purpose of the study is to identify the designers' and the patterner's pattern making, draping and the use of dress form in domestic companies of designer's brand to present basic information for effective pattern works. It turned out that the designer brand companies at home use flat pattern and draping at the same time rather than draping only The effects of the use of draping lies in unique designs and elastic materials, which seems proper phenomena for the current design trend such as high duality and diversification. But, draping has such problems that the pattern takes long time to be finished and that the staffs don't acquire well the needed skills due to the lack of draping education. To secure the high added value of fashion, it is required to develop education programs for new skills and to apply draping actively. Also, it requires an educational system in which practice oriented skills are cultivated, and efficient investment into apparel business.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.83-86
• /
• 2002

This paper presents an implementation of Pill controller for DC-DC converter using the microcontroller. The features of the microcontroller such as the on chip ADC and Pulse width Modulator (PWM) eliminate the external components needed to perform these functions. The duty rate cycle for the DC-DC converter can be updated every time when the (ADC) conversation and the calculation time are finished. The stable response can be obtained for any kind of DC-DC converters. The SMPS controller looks at the converter output, compares the output to a set point, performs a control algorithm (Pill algorithm) and finally applies the algorithm output to the PWM. PWM output is then used to drive the DC-DC converter. Figure (1) shows a simplified block diagram of a complete DC-DC converter system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.116-125
• /
• 2014

In this paper, we investigate an inventory and production system in a three-layer supply chain system involving a single supplier, single manufacturer and multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce single item, but we consider raw materials in order to produce multiple items. It is assumed that the cycle time at each stage is an integer multiple of the adjacent downstream stage. We develop an iterative solution procedure to find the order quantity for the multiple items and raw materials that minimizes the supply chain-wide total cost per unit time of the supplier and manufacturer's raw materials ordering and holding, setup and finished items holding, the retailer's ordering and inventory holding. Numerical examples are presented to show that the proposed heuristic gives good performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.53-64
• /
• 1994

Rouge cutting process takes the major portion of machining operation using NC milling machine. Especially, most of the machining time is spent in this process when molds are machined. Therefore, an efficient algorithm for generating the tool path for rough cutting is suggested in this paper. The first step of the procedure is getting the volume to be machined by applying the Boolean operation on the finished model and the workpiece which have been modeling system. Basic principle of determining machining procedure is that a large tool should be used at the portion of the simple shape while a small tool should be used at the complex portion. This principle is realized by representing the volume to be machined by an octree, which is basically a set of hexahedrons, and matching the proper tools with the given octants. When the tools are matched with the octants, the tool path can be derived at the same time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.867-880
• /
• 2013

The development for a high speed underwater vehicle has been demanded for a long time, and it is possible to realize using supercavitation. This paper introduces the main technologies that are necessary to develop a supercavitating rocket system, such as "Supercavitation" and "Hydroreactive technology", and describes the operating concepts and principles for its components specifically. Russia has obtained the key technologies of supercavitation and hydroreactive fuel technology for the first time. Russia has developed a supercavitating rocket torpedo, Shkval, and it was in service since 90's. Iran collaborated with Russia to develop a supercavitating rocket torpedo 'Hoot' and finished a test recently. This paper describes the analysis results related with the cavitator based on the technical reports for Shkval of Russia and Hoot of Iran.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.173-184
• /
• 2003

The purpose of this study was to investigate the batting characteristics in elite baseball players. Seven skilled collegiate players hit the ball which was thrown by a pitching machine linearly and strongly to the center of the field. Time, velocity, angle and pound reaction force variables were measured by using high-speed video cameras and pound reaction force analyzer. The results were as follows: 1. The elite players finished their stride performance in a short time and they stayed longer in a swing phase. The increases in the range of trunk rotation were associated with the delay of the swing phase. 2. The 'take-back' phenomenon in the trunk was showed after the stride phase. 3. The down swing demonstrated powerful line drives. 4. Equivalent body weights were placed on both feet during the ready phase. 95% of the body weights were moved to the rear foot during the stride phase, whereas the body weights were driven to the front foot during the swing phase. 95% of the body weights were placed on the front foot at impact.