• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.225-233
• /
• 2002

This study was aimed to evaluate the effects of ultrasonic vibration on margin types and cements by comparing bond strength of cemented crown. In this study, margins of each metal die, which were chamfer, shoulder and shoulder with bevel, were prepared using computer milling machine. Specimens were cemented with zinc phosphate cement or resin cement. The specimens were divided by the finish line and cement used, ultrasonic vibration. I made total 84 specimens. All specimens were divided into two groups. One group was not vibrated, the other group was subjected to ultrasonic vibration for 12 minutes. Tensile bond strength was measured using Universial testing machine. The changes of bond strength in groups were statistically analyzed by t-test or One-way ANOVA. The results were as follows : 1. Ultrasonic instrumentation diminished the bond strength of crown cemented with zinc phosphate cement and resin cement after 12 minutes application. 2. In case of zinc phosphate cement, the bond strength of a vibrated group was showed significantly decreased(p<0.05). In vibrated groups with zinc phosphate cement, shoulder with bevel exhibit a significant difference to chamfer and shoulder(p<0.05) 3. Resin cement was more resistant to ultrasonic vibration than zinc phosphate cement and showed no significant differences according to ultrasonic vibration and margin type. In conclusion, These results revealed that zinc phosphate cement was most affected and resin cement was the least affected by ultrasonic vibration. Especially shoulder with bevel design was most affected in zinc phosphate cement groups. we should consider these results and be taken in the application of ultrasonic vibration to any teeth restored with crowns.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.165-174
• /
• 1990

현재 임상에서 사용되고 있는 니켈-크롬합금(Washiloy Soft, Kamemizu Chemical Inc. Ltd., Japan)을 이용하여 Chamfer, shoulder, shoulder with a $45^{\circ}$ bevel의 각 치경부 변연의 형태에 따른 시멘트층 피막후경을 교합면 및 치경부에서 측정, 비교하여 다음과 같은 결론을 얻었다. 금관의 교합면 장착정도는 chamfer가 가장 우수하고, 다음으로는 shoulder, shoulder with a $45^{\circ}$ bevel의 순이며, 이들 간에는 유의성 있는 차이를 나타내었다(p<.05). 금관의 치경부 적합도는 chamfer가 가장 우수하고, 다음으로 shoulder with a $45^{\circ}$ vevel, shoulder의 순이며, 이들 간에는 유의성 있는 차이를 나타내었다(p<.05).

• 복식
• /
• 제27권
• /
• pp.163-171
• /
• 1996

As the current stage of the fashion begins to follow the styles of the past the study on he past costume is getting more importance and as the methodology of the study the accurately ap-proached study through the rehabilitation of the past costume is more needed than the simple re-arrangement of the historical documents. By this methodology this study can be positioned as a re-creation activity. The results of the study are as follows. 1) Style: The S-line silhouette remains be-cause of the straight silhouette or the blossom style bodice. This dress has various types of sil-houette but generally it forms one silhouette and is one-piece. 2) color and Material: The material varies hile the color is divided as the main color of ivory and the stress color of brown. This shows not only that the material has been varied but also that they tried to reduce the monotony. 3) Pattern and Sewing: The simple external figure and the previous stage typically shows the movement to the simplicity of the contemporary and the num-ber of patterens is plenty and the sewing method is also complex. 4) Detail. To overcome the simplicity of the style and to show the characteristics of the afternoon dress the skunk fur the net the sash, and the bow are used. 5) Structural Characteristics: The front open-ing the back opening and the side opening coexists in one-pieced dress and this forms unique structure and complex fastening device. The ribbon tape and casing not only finish the seam but also fix the shape of the dress. Synthetically the 1913-14 afternoon dress has the characteristics of transitional stage in which the characteristics of the costume of 1910s and the remnants of the characteristics of the pre-vious costume style and shows the character-istics of afternoon dress well in terms of the ma-terial the structure and the detail.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.454-464
• /
• 1999

The metal ceramic crown is currently the most popular complete veneer restoration in dentistry, but in many cases, the metal cervical collar at the facial margin is unesthetic and unacceptable. Facial porcelain margin has been used in place of it. But this dose not solve the problems, such as dark gingival discoloration and cervical opaque reflection of porcelain veneer. Recently, metal copings which were designed to terminate its labio-cervical end on the axial walls coronal to the shoulder have been clinically used to solve the esthetic problem of metal ceramic crown. But in this design, porcelain veneer of labio-cervical area which is not supported by metal may not be able to resist the stress during cementation and mastication. The purpose of this study was to evaluate fracture strength and fractured appearance of crowns according to different coping designs. A resin maxillary left central incisor analogue was prepared for a metal ceramic crown, and metal dies were made with duplication mold. Metal copings were made and assigned to one of four groups based on facial framework designs: group 1, coping with 0.5mm metal collar; group 2, metal extended to the shoulder; group 3, metal extended to 1mm coronal tn the shoulder: group 4, metal extended to 2mm coronal to the shoulder. Copings and crowns were adjusted to be same size and thickness, and cemented to metal dies with zinc phosphate cement by finger pressure. Fracture strength was measured with Instron Universal Testing Machine. Metal dies were anchored in Three-way-vice at 3mm below finish line and at $130^{\circ}$ inclined to the long axis of the crown. Load was directed lingually at 2mm below midincisal edge. Load value at initial crack and at catastrophic fracture was recorded. The results obtained were as follows : 1. Fracture strength values at initial crack were higher in groups 1, 2 than in groups 3, 4 but this difference was not statistically significant(P<0.05). 2. Conventional metal collared crown had greater catastrophic fracture strength than any other collarless crowns. 3. The greater the labial metal coping reduction, the lower the catastrophic fracture strength of crowns but when more than 1mm of labial metal reduction was done, the difference in strengths was not statistically significant(p<0.05). 4. The strongest collarless coping design was group 2.

• 한국의상디자인학회지
• /
• 제4권1호
• /
• pp.111-130
• /
• 2002

This study performed a structural questionnaire survey and non-structural interview of the ladies apparel manufacturers in Daegu on the qualification for the employees, skills required for job performance, job training, automatic manufacturing systems, and the use of computer. The results are as follows. 1. Almost all of the apparel manufacturing systems were Pair System, except one Line System in one company. In terms of outsourcing, most of the manufacturers answered “yes,” and in 1998 the outsourcing process was sewing, but in the year 2002, outsourcing has been increased :12 manufacturers(57.1%) outsourcing most of the processes except patterning, 3(14.3%) outsourcing the finish of sewing. 2. The workforce of 1998 and that of 2002 shows a significant difference(P＜. 01) between office work and management. The number of office workers has decreased from 15 down to 5.3 people. On the other hand, that of the management has slightly increased from 5.3 to 9.2 people. The number of the manual workers has decreased from 32.2 to 28.7 people. And the number of tailoring and patterning workers has slightly decreased, but the number has increased in sewing from 3.7 to 7.0 people. 3. The wage of an employee shows a significant difference between a sewing assistant(P＜. 01) and a production manager(P＜. 05), and the wage of a sewing assistant, in particular, has slightly raised from ￦905,000 to ￦1,054,000. 4. The qualifications required of employees are “cooperative human relations”(30.8％), “diligence,” and “ability for job analysis”(26.9％), and “positive thinking” (15.4％) in 1998, and “ability for job analysis”(38.5％), “cooperative human relations”(34.6％), and “positive thinking” (15.4％) in 2002. The areas for job openings are significantly different(P＜. 01) depending on the year. Job openings in the design section has increased from 1(3.8％) to 16 manufacturers (61.5％), and decreased in tailoring section from 22(84.6％) to 2 manufacturers(7.7％). Job openings in the sewing section have increased form 2(7.7％) to 6 manufacturers (23.1％). In terms of sex of the employees, there is a significant difference(P＜. 001). 19 companies(73.1％) wanted “male” in 1998, but 8 companies(30.8％) answered that they want “female” and 17 companies(65.4％) answered that “it does not matter.” About the educational background, there was a significant difference between the years. The number of the companies that want junior college graduates with an associate degree has increased(15 companies(57.7％). There was a significant difference(P＜. 05) in major of the employee. The number of the companies that want fashion majors has increased from 5(19.2％) to 20(76.9％). 5. In terms of job skills required, there was no significant difference. In 1998, “production skills” (46.2％) and “ability for job analysis” (26.9％) were required, and in 2002, “ability for job analysis” (42.3％) and “emotional skills” (26.9％). 6. In regard to training for job skills, “fashion professional training” has slightly decreased from 65.4％ in 1998 to 46.2％ in 2002, however, “training for job analysis” has slightly increased from 30.8％ in 1998 to 46.2％ in 2002, which indicates the fact that “fashion professional training” and “ability for job analysis” have been emphasized. 7. The number of the manufacturers purchased apparel CAD has increased from 1(3.8％) to 3(11.5％), and the number of the manufacturers that have no plan for purchase has increased from 16(61.5％) in 1998 to 15(57.7％), still taking up a big proportion. 8. About the use of computers in manufacturing, there is a significant difference(P＜. 05). The number of the manufacturers using computer has increased from 5(19.2％) to 15(57.7％) and that of the manufacturers which do not use computers has decreased from 17(57.7％) to 8(30.8％). 9. In the interviews with the owners of the manufacturers, they pointed that schools should give more weight on practical training courses, the invitation of experts in the specific field, complex production systems, training courses for sewing, field trip courses, and furthering specialty education, personality and vocational education.

• 대한치과보철학회지
• /
• 제46권1호
• /
• pp.1-11
• /
• 2008

현대 치의학에서는 환자의 심미적 만족을 충족시키기 위한 지속적인 관심으로 완전 도재관의 발전을 가져왔다. 최근의 연구 결과들은 완전 도재관의 물리적 성질과 마모 저항성, 색조의 안정성 등을 보고하고 있다. 이와 같이 여러 장점이 많음에도 불구하고 아직 파절에 대한 저항성에는 많은 의문점을 내포하고 있다. 구강 내에서 기능적인 교합력은 수복물의 변연에 응력을 주게된다. 이러한 응력은 주변 조직으로 잘 분산되어져야 하는데, 수복물의 변연 형태에 따라 다른 양상을 보여주게 된다. 변연 형태는 수복물의 부피와 모양, 그리고 변연에서의 적합도에도 영향을 주게 된다. 본 연구에서는 완전 도재관에서의 변연 형태에 따른 응력 분포를 3차원 유한 요소 분석법을 이용하여 조사하였다. 상악 중절치가 기본 모델로 사용되었고, 완전 도재관을 재현하였다. 변연 형태로는 $90^{\circ}$ shoulder, $110^{\circ}$ shoulder, $135^{\circ}$ shoulder형태를 부여하고, 100N의 힘을 치축에 $45^{\circ}$ 방향으로 가하였다. 그 결과 도재 내부의 응력 분포는 $90^{\circ}$, $110^{\circ}$ 모델에 비해 변연 각도가 $135^{\circ}$인 모델의 경우가 응력의 분포가 고르게 나타났다. 그러나 변연에서는 $90^{\circ}$와 $110^{\circ}$ 모델의 응력보다 조금 더 집중되었다. $90^{\circ}$와 $110^{\circ}$ 모델의 비교시는 대체로 비슷했다. 알루미나 코아 내부의 응력 분포에서도 또한 $135^{\circ}$인 모델이 $90^{\circ}$와 $110^{\circ}$ 모델의 응력분포보다 더 잘 분포되었다. $90^{\circ}$와 $110^{\circ}$ 모델의 비교시는 $110^{\circ}$가 $90^{\circ}$ 모델에 비해 더 좋은 응력분포를 보였다. 알루미나 코아와 접착제 사이의 계면에서는 응력이 변연으로 갈수록 감소하고, 알루미나 코아와 도재 사이의 계면에서는 변연으로 갈수록 응력이 점차 증가하였다. $135^{\circ}$ shoulder는 고른 응력분포임에도 변연에서의 응력 집중이 나타나므로 완전 도재관의 변연으로는 적절하지 못하며, $90^{\circ}$ shoulder보다 상대적으로 좋은 응력분포와 변연 형성의 용이성이 우세한 $110^{\circ}$ shoulder가 완전 도재관의 변연에 추천될 수 있겠다.